A Maytag washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. Below are independent repair companies serving Ogden, with those that mention Maytag first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Independent Maytag Washer Technicians, Ogden UT
We found 26 appliance repair companies within 30 miles of Ogden. 3 list an address in Ogden, and other nearby bases include Clearfield (3), North Ogden (2), and Clinton (2). Nearest on the list: The Appliance Whisperer's, around 0.5 miles out. No company within 90 miles of Ogden mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 17 rated companies in range average 4.4 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Name washers or washing machines in their listing | 0 |
|---|---|
| Mention Maytag | 0 |
| Open on Saturdays (per listing) | 17 |
| Repair companies inside 30 miles | 26 |
| Three nearest companies, miles away | 0.5, 1.0, 3.5 |
| With 4.5+ stars and at least 10 reviews | 10 |
Closest matches for Ogden: Dick Kearsley Service Center (8.8 miles away, based in Clearfield, 4.6 stars from 609 reviews, lists Saturday hours); Ben Lomond Appliance Repair llc (6.4 miles away, based in North Ogden, 5.0 stars from 155 reviews, lists Saturday hours); iFiX, LLC (4.8 miles away, based in Riverdale, 4.9 stars from 436 reviews); Eagle Appliance Repair (8.3 miles away, based in Clearfield, 4.2 stars from 69 reviews).
Know Your Maytag Washer
How Maytag Washers Are Built
The washer will only run and spin when the lid or door switch senses it is fully closed, and the lid or door locks at the start of a cycle. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
Common Maytag Washer Problems
- Washer not draining or not spinning. Maytag says to confirm the lid or door is fully shut and the load is balanced, then check for oversudsing, a kinked or clogged drain hose, standpipe height and, on some front loaders, a clogged drain pump filter. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
- Washer not filling. Maytag says to make sure both faucets are fully open, the inlet hoses are not kinked, and the inlet screens on the water valve are not clogged. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
What Maytag Washer Codes Mean
| Code | What it means |
|---|---|
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
When to Call for Maytag Washer Repair
- Water on the floor under or in front of the washer
- Loud banging, shaking or walking during the spin
- Washer fills slowly, will not fill, or keeps filling
What Gets Fixed on a Ogden Washer Call
Owner Care for Maytag Washers
- On front loaders, wipe and dry the door seal folds, remove wet loads promptly and leave the door slightly open after use to limit mildew and odor. Source: Maytag Product Help - Cleaning a Front Load Washer Door Seal
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
What Maytag Washer Repairs Cost
Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- How old the washer is
- Where the washer drains (standpipe or laundry sink)
What Ogden Owners Should Know
Most washer calls in Ogden come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
How to Choose a Washing Machine Technician Near Ogden
- What is the service call or diagnostic fee, and is it applied to the repair?
- Do you work on front-load and top-load washers, or only one type?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
Maytag Washer Repair FAQs: Ogden, UT
Is my Maytag washer worth repairing?
Which Ogden technicians work on Maytag?
Why does my Maytag washer show an error code?
Why does my front-load washer smell?
Other Washer Repair in Ogden
Maytag Washer Repair Near Ogden
Write down any error code your Maytag washer shows and at what point in the cycle it appears. It helps a Ogden technician bring the right parts.