Most Maytag washer repairs in West Haven involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The West Haven list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Maytag. If your washer is still under manufacturer coverage, contact Maytag directly.
Who Works on Maytag Washers Near West Haven
We found 26 appliance repair companies within 30 miles of West Haven. Other nearby bases include Ogden (3), Clearfield (3), and Clinton (2). None of the repair companies near West Haven name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The closest is iFiX, LLC, about 3.4 miles away. Across 17 rated companies, the average public rating is 4.4 stars.
Companies are shown by relevance and distance from West Haven. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Listing Saturday hours | 17 |
|---|---|
| Name washers or washing machines in their listing | 0 |
| Mention Maytag | 0 |
| Distance to the three closest (mi) | 3.4, 4.3, 4.4 |
| Companies within 30 miles | 26 |
| With 4.5+ stars and at least 10 reviews | 10 |
At the top of the West Haven list: Dick Kearsley Service Center (7.2 miles away, based in Clearfield, 4.6 stars from 609 reviews, lists Saturday hours); iFiX, LLC (3.4 miles away, based in Riverdale, 4.9 stars from 436 reviews); Ben Lomond Appliance Repair llc (8.8 miles away, based in North Ogden, 5.0 stars from 155 reviews, lists Saturday hours); Eagle Appliance Repair (6.4 miles away, based in Clearfield, 4.2 stars from 69 reviews).
Maytag Washer Lines Technicians Work On
What Makes Maytag Washer Repairs Different
The washer will only run and spin when the lid or door switch senses it is fully closed, and the lid or door locks at the start of a cycle. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
Maytag top loaders move clothes with either an agitator or an impeller, and the drive shifts between agitation and full spin, which can make a normal clunking sound. Source: Maytag - How to repair a washing machine (top load)
What Maytag Says to Check First
- Washer odor. Maytag links odor to skipped cleanings, wet loads left sitting and too much detergent or softener, and recommends regular washer cleaning and moving loads out promptly. Source: Maytag - How to repair a washing machine (top load)
- Washer not draining or not spinning. Maytag says to confirm the lid or door is fully shut and the load is balanced, then check for oversudsing, a kinked or clogged drain hose, standpipe height and, on some front loaders, a clogged drain pump filter. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
Maytag Washer Error Codes
| Code | What it means |
|---|---|
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F5E2 | Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code |
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
Signs Your Maytag Washer Needs a Technician
- Washer fills slowly, will not fill, or keeps filling
- Water on the floor under or in front of the washer
- Water left in the drum after the cycle
What a Washing Machine Technician Checks
Care Maytag Recommends for Its Washers
- On front loaders, wipe and dry the door seal folds, remove wet loads promptly and leave the door slightly open after use to limit mildew and odor. Source: Maytag Product Help - Cleaning a Front Load Washer Door Seal
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Budgeting for a Maytag Washer Repair
Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- How old the washer is
- Any error code shown on the display
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Laundry Notes for West Haven, UT
Most washer calls in West Haven come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Hiring a Washer Repair Company in West Haven
- How often do you repair Maytag washers, and how quickly can you get parts?
- If the washer is leaking, will you find where the water starts before quoting a part?
- What guarantee do you give on parts and labor?
Maytag Washer Repair FAQs: West Haven, UT
What should I do about a Maytag error code?
Why is my washer leaking?
Do you work for Maytag?
Why won't my washer spin?
More Washing Machine Repair in West Haven, UT
Maytag Washer Repair Near West Haven
Write down any error code your Maytag washer shows and at what point in the cycle it appears. It helps a West Haven technician bring the right parts.