Maytag Washer Repair in Harrisville, UT

If your Maytag washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Harrisville list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.

Washing Machine Repair Near Me is independent and not affiliated with Maytag. Listed companies are independent technicians who repair Maytag washers and other brands.

Who Works on Maytag Washers Near Harrisville

Within 30 miles of Harrisville there are 25 appliance repair companies in our data. The rest are spread across Ogden (3), Clearfield (3), and North Ogden (2). Distances run up to about 30 miles. No company within 90 miles of Harrisville mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Nearest on the list: Integrity Appliance Repair, around 1.7 miles out. Across 17 rated companies, the average public rating is 4.4 stars.

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

At the top of the Harrisville list: Ben Lomond Appliance Repair llc (2.5 miles away, based in North Ogden, 5.0 stars from 155 reviews, lists Saturday hours); Dick Kearsley Service Center (12.5 miles away, based in Clearfield, 4.6 stars from 609 reviews, lists Saturday hours); iFiX, LLC (8.2 miles away, based in Riverdale, 4.9 stars from 436 reviews); R.A.C.E.R. Service Appliance Repair (28.0 miles away, based in Nibley, 4.7 stars from 12 reviews).

Maytag sells top-load agitator, top-load impeller, and front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.

Maytag Washer Lines and Features

What a Maytag Washer Technician Deals With

Maytag top loaders move clothes with either an agitator or an impeller, and the drive shifts between agitation and full spin, which can make a normal clunking sound. Source: Maytag - How to repair a washing machine (top load)

A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information

Maytag Washer Symptoms and First Checks

• Washer leaking. Maytag points first to loose inlet hose connections or missing hose washers, then to the drain hose and a backed-up household drain, and to clothes added mid-cycle that raise the water over the tub. Source: Maytag Product Help - Leaking Water Underneath - Washer
• Washer not filling. Maytag says to make sure both faucets are fully open, the inlet hoses are not kinked, and the inlet screens on the water valve are not clogged. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling

Reading a Maytag Washer Error Code

Maytag Washer Problems Worth a Service Call

• Water on the floor under or in front of the washer
• Washer fills slowly, will not fill, or keeps filling
• Water left in the drum after the cycle

What Gets Fixed on a Harrisville Washer Call

Keeping a Maytag Washer Running

• If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
• Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer

Brand guides: Maytag Washer Not Draining or Spinning: Causes.

Budgeting for a Maytag Washer Repair

A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:

• Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
• Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
• Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
• Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?

50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

What to Have Ready for a Maytag Washer Call

• The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
• Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
• What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)

Laundry Notes for Harrisville, UT

Most washer calls in Harrisville come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Questions to Ask a Harrisville Washer Technician

• If the washer is leaking, will you find where the water starts before quoting a part?
• Is your company licensed where my state requires it, and insured?
• Can you give a written estimate before ordering parts?

Maytag Washer Repair FAQs: Harrisville, UT

More Washing Machine Repair in Harrisville, UT

More Maytag Washer Repair Pages Nearby

Write down any error code your Maytag washer shows and at what point in the cycle it appears. It helps a Harrisville technician bring the right parts.