A Maytag washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. Below are independent repair companies serving North Ogden, with those that mention Maytag first, then the nearest appliance repair companies.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Maytag. If your washer is still under manufacturer coverage, contact Maytag directly.
Independent Maytag Washer Technicians, North Ogden UT
Within 30 miles of North Ogden there are 22 appliance repair companies in our data. 2 list an address in North Ogden, and other nearby bases include Ogden (3), Clearfield (3), and Clinton (2). The farthest listed company is about 30 miles out. No company within 90 miles of North Ogden mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Integrity Appliance Repair is the nearest, roughly 0.8 miles from North Ogden. Rated companies nearby average 4.3 stars across 15 businesses.
Companies are shown by relevance and distance from North Ogden. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention Maytag | 0 |
|---|---|
| Listing Saturday hours | 13 |
| Repair companies inside 30 miles | 22 |
| Rated 4.5 stars or higher (10+ reviews) | 9 |
| Three nearest companies, miles away | 0.8, 1.0, 6.4 |
| Mention washer work | 1 |
The leading options for North Ogden are Ben Lomond Appliance Repair llc (1.0 miles away, 5.0 stars from 155 reviews, lists Saturday hours); Dick Kearsley Service Center (14.5 miles away, based in Clearfield, 4.6 stars from 609 reviews, lists Saturday hours); iFiX, LLC (10.3 miles away, based in Riverdale, 4.9 stars from 436 reviews); R.A.C.E.R. Service Appliance Repair (25.8 miles away, based in Nibley, 4.7 stars from 12 reviews).
Maytag Washer Lines and Features
How Maytag Washers Are Built
Top load HE models use auto-sensing, spinning slowly to estimate the load before adding water in stages, so the water level can look lower than owners expect. Source: Maytag Product Help - Auto Sensing in a Top Load HE Washer
Common Maytag Washer Problems
- Washer not filling. Maytag says to make sure both faucets are fully open, the inlet hoses are not kinked, and the inlet screens on the water valve are not clogged. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- Washer odor. Maytag links odor to skipped cleanings, wet loads left sitting and too much detergent or softener, and recommends regular washer cleaning and moving loads out promptly. Source: Maytag - How to repair a washing machine (top load)
What Maytag Washer Codes Mean
| Code | What it means |
|---|---|
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
Maytag Washer Problems Worth a Service Call
- Musty or mildew smell from the drum or door seal
- Burning smell or a motor that hums without turning
- Grinding or roaring noise that rises with spin speed
What Gets Fixed on a North Ogden Washer Call
Care Maytag Recommends for Its Washers
- Use only HE detergent in HE washers and measure it per the detergent maker's directions, since too much causes oversudsing, poor rinsing and residue. Source: Maytag Product Help - HE Detergent use in a Washer
- On front loaders, wipe and dry the door seal folds, remove wet loads promptly and leave the door slightly open after use to limit mildew and odor. Source: Maytag Product Help - Cleaning a Front Load Washer Door Seal
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Maytag Washer Repair Cost Ranges
A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Where the washer drains (standpipe or laundry sink)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Any error code shown on the display
What North Ogden Owners Should Know
Most washer calls in North Ogden come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Questions to Ask a North Ogden Washer Technician
- Is your company licensed where my state requires it, and insured?
- If a part has to be ordered, how soon can you come back to finish?
- What is the service call or diagnostic fee, and is it applied to the repair?
Maytag Washer Repair FAQs: North Ogden, UT
How do I get rid of a washer mildew smell?
Should I repair or replace my Maytag washer?
Is this Maytag customer service?
Related Repair Pages for North Ogden
Maytag Washer Repair in Nearby Cities
Before you call, find the model and serial number on your Maytag washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.