Most Kenmore washer repairs in Harrisville involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving Harrisville, with those that mention Kenmore first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Kenmore, and the technicians listed are independent repair companies, not the manufacturer.
With a Kenmore washer, the model number matters more than the badge: it tells a technician exactly which parts and repair steps apply. Find it on the label before you call.
Independent Kenmore Washer Technicians, Harrisville UT
We found 25 appliance repair companies within 30 miles of Harrisville. The rest are spread across Ogden (3), Clearfield (3), and North Ogden (2). The farthest listed company is about 30 miles out. Nearest on the list: Integrity Appliance Repair, around 1.7 miles out. No company within 90 miles of Harrisville mentions Kenmore by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 17 rated companies in range average 4.4 stars.
Companies are shown by relevance and distance from Harrisville. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Repair companies inside 30 miles | 25 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 11 |
| Listing Saturday hours | 15 |
| Name washers or washing machines in their listing | 1 |
| Distance to the three closest (mi) | 1.7, 2.5, 4.5 |
| Mention Kenmore | 0 |
At the top of the Harrisville list: Ben Lomond Appliance Repair llc (2.5 miles away, based in North Ogden, 5.0 stars from 155 reviews, lists Saturday hours); iFiX, LLC (8.2 miles away, based in Riverdale, 4.9 stars from 436 reviews); R.A.C.E.R. Service Appliance Repair (28.0 miles away, based in Nibley, 4.7 stars from 12 reviews); Ebenezer Appliance Repair (5.0 miles away, based in Ogden, 4.7 stars from 25 reviews).
Kenmore sells top-load agitator, top-load impeller, front-load, and all-in-one combo washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Kenmore Washer Lines and Features
What a Kenmore Washer Technician Deals With
Sensor-equipped models estimate load size and soil level and adjust water and detergent to match. Source: Kenmore - 5 things you didn't know a Kenmore smart washer and dryer could do
Top load models are built with either a Triple Action Agitator or an agitator-free impeller wash plate, which changes the parts and wash motion a technician works on. Source: Kenmore - Laundry Helper: Kenmore Washer Buying Guide
When to Call for Kenmore Washer Repair
- Washer will not spin, or clothes come out soaking wet
- An error code on the display
- Water left in the drum after the cycle
What Gets Fixed on a Harrisville Washer Call
Care Kenmore Recommends for Its Washers
- Use a level to confirm the washer sits evenly and adjust the feet if it does not. Source: Kenmore - Appliance Maintenance Tips to Help Maximize Efficiency
- Smart models alert the owner when it is time to run the washer cleaning cycle. Source: Kenmore - 5 things you didn't know a Kenmore smart washer and dryer could do
Brand guides: Kenmore Washer Not Draining or Spinning: Fixes.
Kenmore Washer Repair Cost Ranges
Most Kenmore washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- How old the washer is
- Where the washer drains (standpipe or laundry sink)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Local Notes for Harrisville
Most washer calls in Harrisville come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
How to Choose a Washing Machine Technician Near Harrisville
- How often do you repair Kenmore washers, and how quickly can you get parts?
- If the washer is leaking, will you find where the water starts before quoting a part?
- What is the service call or diagnostic fee, and is it applied to the repair?
Kenmore Washer Repair FAQs: Harrisville, UT
Where is the water under my washer coming from?
What stops a washer from spinning?
Is my Kenmore washer worth repairing?
What should I do about a Kenmore error code?
Related Repair Pages for Harrisville
Kenmore Washer Repair in Nearby Cities
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Kenmore repair.