If your Kenmore washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. Below are independent repair companies serving Salt Lake City, with those that mention Kenmore first, then the nearest appliance repair companies.
Washing Machine Repair Near Me is independent and not affiliated with Kenmore. Listed companies are independent technicians who repair Kenmore washers and other brands.
With a Kenmore washer, the model number matters more than the badge: it tells a technician exactly which parts and repair steps apply. Find it on the label before you call.
Who Works on Kenmore Washers Near Salt Lake City
We found 40 appliance repair companies within 30 miles of Salt Lake City. 21 list an address in Salt Lake City, and the rest are spread across South Salt Lake (6), West Valley City (5), and North Salt Lake (2). Distances run up to about 8 miles. No company within 90 miles of Salt Lake City mentions Kenmore by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Nearest on the list: Salt Appliance Repair, around 0.9 miles out. Rated companies nearby average 4.7 stars across 30 businesses.
Companies are shown by relevance and distance from Salt Lake City. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Distance to the three closest (mi) | 0.9, 1.5, 2.2 |
|---|---|
| Mention Kenmore | 0 |
| Listing Saturday hours | 44 |
| Companies within 30 miles | 60 |
| Rated 4.5 stars or higher (10+ reviews) | 14 |
| Name washers or washing machines in their listing | 5 |
Closest matches for Salt Lake City: Mr. Appliance of Salt Lake City (6.1 miles away, 4.7 stars from 1,513 reviews, lists Saturday hours); Quality Appliance Service (4.1 miles away, based in West Valley City, 4.6 stars from 1,441 reviews); Titan Appliance Repair (5.7 miles away, based in South Salt Lake, 4.8 stars from 21 reviews, lists Saturday hours); Western Appliance Solution (2.2 miles away, 5.0 stars from 82 reviews).
Know Your Kenmore Washer
How Kenmore Washers Are Built
Some top load models use an adaptive motor that adjusts its power to each load. Source: Kenmore - Life Your Way Loves Kenmore Top Load Laundry
Signs Your Kenmore Washer Needs a Technician
- An error code on the display
- Washer will not start or the lid or door stays locked
- Water on the floor under or in front of the washer
What a Washing Machine Technician Checks
Owner Care for Kenmore Washers
- Avoid packing in extra-large loads and follow the detergent maker's dosing for each load. Source: Kenmore - Tips for Washing Extra Large Loads of Laundry
- Check the hoses behind the washer regularly for cracks, bulges or drips, and replace them about every five years. Source: Kenmore - Appliance Maintenance Tips to Help Maximize Efficiency
Brand guides: Kenmore Washer Not Draining or Spinning: Fixes.
What Kenmore Washer Repairs Cost
Most Kenmore washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Any error code shown on the display
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Laundry Notes for Salt Lake City, UT
Salt Lake City Department of Public Utilities, which supplies Salt Lake City, reports hardness of hard to very hard depending on source: roughly 132-194 mg/L (about 8-11 grains per gallon) at the city's treatment plants, with well water higher in places. Hard water leaves scale on washer inlet screens and heating parts and calls for the right detergent dose, which is worth mentioning when you book a repair. Source: Salt Lake City Department of Public Utilities - Drinking Water Quality Report
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
How to Choose a Washing Machine Technician Near Salt Lake City
- How often do you repair Kenmore washers, and how quickly can you get parts?
- Is your company licensed where my state requires it, and insured?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
Kenmore Washer Repair FAQs: Salt Lake City, UT
Is my Kenmore washer worth repairing?
Why is my washer leaking?
How do I get rid of a washer mildew smell?
Related Repair Pages for Salt Lake City
More Kenmore Washer Repair Pages Nearby
Before you call, find the model and serial number on your Kenmore washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.