A Electrolux washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. We flag companies whose listing or website mentions Electrolux and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with Electrolux, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Electrolux Washers Near Salt Lake City
Within 30 miles of Salt Lake City there are 40 appliance repair companies in our data. 21 list an address in Salt Lake City, and other nearby bases include South Salt Lake (6), West Valley City (5), and North Salt Lake (2). No company within 90 miles of Salt Lake City mentions Electrolux by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is Salt Appliance Repair, about 0.9 miles away. The 30 rated companies in range average 4.7 stars.
Companies are shown by relevance and distance from Salt Lake City. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Companies within 30 miles | 60 |
|---|---|
| Open on Saturdays (per listing) | 44 |
| Three nearest companies, miles away | 0.9, 1.5, 2.2 |
| Name washers or washing machines in their listing | 5 |
| Mention Electrolux | 0 |
| With 4.5+ stars and at least 10 reviews | 14 |
Closest matches for Salt Lake City: Mr. Appliance of Salt Lake City (6.1 miles away, 4.7 stars from 1,513 reviews, lists Saturday hours); Quality Appliance Service (4.1 miles away, based in West Valley City, 4.6 stars from 1,441 reviews); Baseline Home Maintenance (2.6 miles away, 5.0 stars from 258 reviews, lists Saturday hours); Titan Appliance Repair (5.7 miles away, based in South Salt Lake, 4.8 stars from 21 reviews, lists Saturday hours).
Know Your Electrolux Washer
How Electrolux Washers Are Built
Supply pressure is specified at 30 to 120 psi with no more than about 10 psi difference between hot and cold, and the inlet connectors carry filters that can clog. Source: Electrolux - Laundry Water Supply Guide
The washer can detect hot and cold inlet hoses connected backward and shows HO SE until they are swapped; reversed lines are also listed as a cause of long-fill and long-drain codes. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection
Common Electrolux Washer Problems
- Door won't lock / door error. Make sure the door shuts fully with nothing caught in it, listen for the latch click, and check the latch and striker. Source: Electrolux - Front loading washer Error Code E41 door is open
- Controls won't respond. A LOC display means the control lock is on; turn it off from the control lock option before starting a cycle. Source: Electrolux - Front loading washer Error Code LOC control lock activator
Electrolux Washer Error Codes
| Code | What it means |
|---|---|
| E11 | Long fill time; the washer is not filling during the wash phase. Source: Electrolux - Front loading washer Error Code E11 long fill time |
| E21 | Long pump-out time; water is not leaving the tub fast enough. Source: Electrolux - Front loading washer Error Code E21 long pump out time |
| E41 | The control board reads the door switch as open. Source: Electrolux - Front loading washer Error Code E41 door is open |
When to Call for Electrolux Washer Repair
- Grinding or roaring noise that rises with spin speed
- Washer will not start or the lid or door stays locked
- Musty or mildew smell from the drum or door seal
What Gets Fixed on a Salt Lake City Washer Call
Owner Care for Electrolux Washers
- Connect the washer with new fill hoses and rubber washers, swap flood-safe hoses for standard washer hoses, and hand-tighten plus about two-thirds of a turn without cross-threading. Source: Electrolux - Laundry Water Supply Guide
- Flush each faucet before hooking up the hoses so debris does not clog the inlet valve screens. Source: Electrolux - Laundry Water Supply Guide
Electrolux Washer Repair Cost Ranges
Price the repair before replacing a Electrolux washer. Published ranges for common jobs:
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Where the washer drains (standpipe or laundry sink)
- How old the washer is
Around Salt Lake City
Salt Lake City Department of Public Utilities, which supplies Salt Lake City, reports hardness of hard to very hard depending on source: roughly 132-194 mg/L (about 8-11 grains per gallon) at the city's treatment plants, with well water higher in places. Hard water leaves scale on washer inlet screens and heating parts and calls for the right detergent dose, which is worth mentioning when you book a repair. Source: Salt Lake City Department of Public Utilities - Drinking Water Quality Report
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Hiring a Washer Repair Company in Salt Lake City
- Is your company licensed where my state requires it, and insured?
- If the washer is leaking, will you find where the water starts before quoting a part?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
Electrolux Washer Repair FAQs: Salt Lake City, UT
What should I do about a Electrolux error code?
Why does my front-load washer smell?
Is this Electrolux customer service?
Other Washer Repair in Salt Lake City
More Electrolux Washer Repair Pages Nearby
Before you call, find the model and serial number on your Electrolux washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.