If your Electrolux washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. Below are independent repair companies serving St. George, with those that mention Electrolux first, then the nearest appliance repair companies.
Washing Machine Repair Near Me is independent and not affiliated with Electrolux. Listed companies are independent technicians who repair Electrolux washers and other brands.
Independent Electrolux Washer Technicians, St. George UT
Our data shows 9 appliance repair companies inside a 60-mile radius of St. George. 4 list an address in St. George, and the rest are spread across Cedar City (2), Washington (1), and Hurricane (1). The closest is Appliance Solutions of Utah, about 0.7 miles away. None of the repair companies near St. George name Electrolux in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Across 8 rated companies, the average public rating is 4.4 stars. Because the nearest shops are farther out, ask each company whether St. George is inside its regular service area.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Mention Electrolux | 0 |
|---|---|
| Listing Saturday hours | 4 |
| Distance to the three closest (mi) | 0.7, 2.8, 3.0 |
| Rated 4.5 stars or higher (10+ reviews) | 3 |
| Name washers or washing machines in their listing | 2 |
| Appliance repair companies in range (60 mi) | 9 |
At the top of the St. George list: Mr. Appliance of St. George (2.8 miles away, 4.8 stars from 1,430 reviews, lists Saturday hours); Sears Appliance Repair (3.2 miles away, 4.1 stars from 249 reviews, lists Saturday hours); Appliance Repair Center (17.1 miles away, based in Hurricane, 4.9 stars from 74 reviews, lists Saturday hours); JJ Service and Repair (6.5 miles away, based in Washington, 4.9 stars from 107 reviews).
Know which Electrolux washer you have before you call. Electrolux makes front-load models, and the technician will ask.
Electrolux Washer Lines and Features
What Makes Electrolux Washer Repairs Different
Water level is monitored by a pressure sensor, which raises E35 when it reads an overfill condition. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill
The drain standpipe should be no taller than 96 inches and at least 1-1/4 inches across, and a hose sealed airtight into the standpipe can slow draining. Source: Electrolux - What should I do if my washer is draining slowly?
Electrolux Washer Symptoms and First Checks
- Washer leaking. Start by pinning down exactly where the water is coming from, since that decides the next step. Source: Electrolux - Front loading washer is leaking water
- Washer not draining. Straighten any kinked drain hose first, then confirm the hot and cold supply lines are not reversed and the drain hose is installed per the manual. Source: Electrolux - Front loading washer Error Code E21 long pump out time
What Electrolux Washer Codes Mean
| Code | What it means |
|---|---|
| E21 | Long pump-out time; water is not leaving the tub fast enough. Source: Electrolux - Front loading washer Error Code E21 long pump out time |
| LOC | The control lock is on, so cycles cannot be started until it is turned off. Source: Electrolux - Front loading washer Error Code LOC control lock activator |
| E41 | The control board reads the door switch as open. Source: Electrolux - Front loading washer Error Code E41 door is open |
Electrolux Washer Problems Worth a Service Call
- Water left in the drum after the cycle
- Washer will not start or the lid or door stays locked
- Burning smell or a motor that hums without turning
What Gets Fixed on a St. George Washer Call
Owner Care for Electrolux Washers
- Use high-efficiency (HE) detergent, keep each dispenser compartment below its max fill line, and put detergent packs in the drum rather than the dispenser. Source: Electrolux - Laundry Washers Detergent Guide
- Keep the washer level on a solid floor, tighten the leveling-leg lock nuts, and keep legs from extending more than half an inch below the cabinet. Source: Electrolux - Laundry Washers Noises Guide
Electrolux Washer Repair Cost Ranges
A Electrolux washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Any error code shown on the display
- Where the washer drains (standpipe or laundry sink)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Around St. George
Most washer calls in St. George come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Hiring a Washer Repair Company in St. George
- If the washer is leaking, will you find where the water starts before quoting a part?
- What guarantee do you give on parts and labor?
- How often do you repair Electrolux washers, and how quickly can you get parts?
Electrolux Washer Repair FAQs: St. George, UT
Which St. George technicians work on Electrolux?
How do I get rid of a washer mildew smell?
Is my Electrolux washer worth repairing?
Is this Electrolux customer service?
Other Washer Repair in St. George
Electrolux Washer Repair in Nearby Cities
Electrolux Washer Repair for Towns Near St. George
Electrolux washer repair for Santa Clara and Ivins is handled by the same companies listed for St. George. Each town also has its own washing machine repair page with the nearest companies:
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Electrolux repair.