If your Whirlpool washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. Below are independent repair companies serving St. George, with those that mention Whirlpool first, then the nearest appliance repair companies.
Washing Machine Repair Near Me is independent and not affiliated with Whirlpool. Listed companies are independent technicians who repair Whirlpool washers and other brands.
Who Works on Whirlpool Washers Near St. George
9 repair companies serve St. George from within 60 miles. 4 of them are based in St. George itself, and the rest are spread across Cedar City (2), Washington (1), and Hurricane (1). The farthest listed company is about 53 miles out. Nearest on the list: Appliance Solutions of Utah, around 0.7 miles out. No company within 90 miles of St. George mentions Whirlpool by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 8 rated companies in range average 4.4 stars. St. George is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Companies are shown by relevance and distance from St. George. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention Whirlpool | 0 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 3 |
| Three nearest companies, miles away | 0.7, 2.8, 3.0 |
| Name washers or washing machines in their listing | 2 |
| Open on Saturdays (per listing) | 4 |
| Appliance repair companies in range (60 mi) | 9 |
Closest matches for St. George: Mr. Appliance of St. George (2.8 miles away, 4.8 stars from 1,430 reviews, lists Saturday hours); Sears Appliance Repair (3.2 miles away, 4.1 stars from 249 reviews, lists Saturday hours); JJ Service and Repair (6.5 miles away, based in Washington, 4.9 stars from 107 reviews); Appliance Repair Center (17.1 miles away, based in Hurricane, 4.9 stars from 74 reviews, lists Saturday hours).
Know which Whirlpool washer you have before you call. Whirlpool makes top-load agitator, top-load impeller, front-load, all-in-one combo, and commercial models, and the technician will ask.
Whirlpool Washer Lines Technicians Work On
How Whirlpool Washers Are Built
The drain hose must run to a standpipe between 30 and 96 inches tall, since a higher drain can let water flow back into the washer. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
Common Whirlpool Washer Problems
- Washer won't start. Check that the washer is plugged in and the breaker has not tripped, turn off the control lock if it is on, and reset the washer by cutting power for at least a minute. Source: Whirlpool - How to reset a washing machine
- Washer not filling. Make sure both hot and cold supply valves are fully open, the fill hoses are not kinked, and the inlet screens are not clogged with sediment. Source: Whirlpool - Why won't my washing machine fill with water
What Whirlpool Washer Codes Mean
| Code | What it means |
|---|---|
| F9 E1 | Draining is taking longer than expected; check the drain hose and standpipe and avoid excess suds. Source: Whirlpool - Error Codes in Front Load Washers |
| F7 E1 | Motor speed sensing problem; check that shipping bolts are removed and the washer is not overloaded. Source: Whirlpool - Error Codes in Front Load Washers |
| Sud / Sd | Too many suds were detected, usually from non-HE or too much detergent. Source: Whirlpool - Error Codes in Front Load Washers |
Whirlpool Washer Problems Worth a Service Call
- Loud banging, shaking or walking during the spin
- An error code on the display
- Washer will not spin, or clothes come out soaking wet
What a Washing Machine Technician Checks
Care Whirlpool Recommends for Its Washers
- Leave the front load door ajar between loads and remove wet clothes promptly so moisture can dry out. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
- Replace the water fill hoses about every five years. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
Whirlpool Washer Repair Cost Ranges
A Whirlpool washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Any error code shown on the display
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Where the washer drains (standpipe or laundry sink)
Around St. George
Most washer calls in St. George come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Hiring a Washer Repair Company in St. George
- Is your company licensed where my state requires it, and insured?
- What guarantee do you give on parts and labor?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
Whirlpool Washer Repair FAQs: St. George, UT
Which St. George technicians work on Whirlpool?
Why won't my washer spin?
Is this Whirlpool customer service?
Why does my Whirlpool washer show an error code?
Other Washer Repair in St. George
Whirlpool Washer Repair in Nearby Cities
Write down any error code your Whirlpool washer shows and at what point in the cycle it appears. It helps a St. George technician bring the right parts.