If your Whirlpool washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. Below are independent repair companies serving Cedar City, with those that mention Whirlpool first, then the nearest appliance repair companies.
Washing Machine Repair Near Me is independent and not affiliated with Whirlpool. Listed companies are independent technicians who repair Whirlpool washers and other brands.
Independent Whirlpool Washer Technicians, Cedar City UT
We found 8 appliance repair companies within 60 miles of Cedar City. 2 list an address in Cedar City, and the rest are spread across St. George (4), Hurricane (1), and Washington (1). The farthest listed company is about 49 miles out. No company within 90 miles of Cedar City mentions Whirlpool by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is ALAN'S Appliance Service, about 2.0 miles away. Rated companies nearby average 4.4 stars across 8 businesses. Cedar City is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Repair companies inside 60 miles | 8 |
|---|---|
| Listing Saturday hours | 4 |
| Three nearest companies, miles away | 2.0, 3.2, 36.2 |
| With 4.5+ stars and at least 10 reviews | 3 |
| Mention washer work | 2 |
| Mention Whirlpool | 0 |
At the top of the Cedar City list: Mr. Appliance of St. George (47.9 miles away, based in St. George, 4.8 stars from 1,430 reviews, lists Saturday hours); Royal Appliance (3.2 miles away, 4.3 stars from 29 reviews); ALAN'S Appliance Service (2.0 miles away, 4.4 stars from 48 reviews); Appliance Repair Center (36.2 miles away, based in Hurricane, 4.9 stars from 74 reviews, lists Saturday hours).
Whirlpool sells top-load agitator, top-load impeller, front-load, all-in-one combo, and commercial washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your Whirlpool Washer
What Makes Whirlpool Washer Repairs Different
Some front load models have an owner-accessible drain pump filter at the lower front of the cabinet, usually reached by removing a small access panel or drawer. Source: Whirlpool - Cleaning the Pump Filter - Front Load Washer
Both top and front load models will only run their spin when the lid or door switch registers the lid or door as fully closed and latched. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
What Whirlpool Says to Check First
- Washer smells. Run the Clean Washer cycle monthly, use only HE detergent, take clothes out promptly, and leave the door open between loads. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
- Washer won't start. Check that the washer is plugged in and the breaker has not tripped, turn off the control lock if it is on, and reset the washer by cutting power for at least a minute. Source: Whirlpool - How to reset a washing machine
Whirlpool Washer Error Codes
| Code | What it means |
|---|---|
| Int | The cycle was paused or canceled, and the washer may drain and spin for a while before it stops. Source: Whirlpool - Error Codes in Front Load Washers |
| F9 E1 | Draining is taking longer than expected; check the drain hose and standpipe and avoid excess suds. Source: Whirlpool - Error Codes in Front Load Washers |
| LOC / LC | Control lock is turned on; touch or hold the Control Lock button to release it. Source: Whirlpool - Error Codes in Front Load Washers |
When to Call for Whirlpool Washer Repair
- Water left in the drum after the cycle
- Water on the floor under or in front of the washer
- Washer fills slowly, will not fill, or keeps filling
How a Washer Service Call Usually Goes in Cedar City
Keeping a Whirlpool Washer Running
- Run the Clean Washer cycle once a month with affresh cleaner or regular liquid chlorine bleach to keep the washer fresh. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
- Clean the front load drain pump filter every few months or whenever lint builds up, on models that have one. Source: Whirlpool - Cleaning the Pump Filter - Front Load Washer
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
Budgeting for a Whirlpool Washer Repair
Most Whirlpool washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- How old the washer is
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Local Notes for Cedar City
Most washer calls in Cedar City come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
How to Choose a Washing Machine Technician Near Cedar City
- What guarantee do you give on parts and labor?
- Will you check the drain pump filter and drain hose before replacing the pump?
- If a part has to be ordered, how soon can you come back to finish?
Whirlpool Washer Repair FAQs: Cedar City, UT
Why is my washer leaking?
Why won't my washer spin?
Should I repair or replace my Whirlpool washer?
More Washing Machine Repair in Cedar City, UT
More Whirlpool Washer Repair Pages Nearby
Before you call, find the model and serial number on your Whirlpool washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.