A Kenmore washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. Below are independent repair companies serving Cedar City, with those that mention Kenmore first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Kenmore, and the technicians listed are independent repair companies, not the manufacturer.
If you bought your Kenmore at Sears, you do not need to go back to Sears for a repair. Independent technicians near Cedar City work on Kenmore washers regularly.
Independent Kenmore Washer Technicians, Cedar City UT
Our data shows 8 appliance repair companies inside a 60-mile radius of Cedar City. 2 list an address in Cedar City, and the rest are spread across St. George (4), Hurricane (1), and Washington (1). Distances run up to about 49 miles. No company within 90 miles of Cedar City mentions Kenmore by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Nearest on the list: ALAN'S Appliance Service, around 2.0 miles out. Rated companies nearby average 4.4 stars across 8 businesses. Cedar City is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Companies are shown by relevance and distance from Cedar City. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Distance to the three closest (mi) | 2.0, 3.2, 36.2 |
|---|---|
| Mention Kenmore | 0 |
| Listing Saturday hours | 4 |
| Repair companies inside 60 miles | 8 |
| Rated 4.5 stars or higher (10+ reviews) | 3 |
| Mention washer work | 2 |
First up for Cedar City: Mr. Appliance of St. George (47.9 miles away, based in St. George, 4.8 stars from 1,430 reviews, lists Saturday hours); Sears Appliance Repair (46.3 miles away, based in St. George, 4.1 stars from 249 reviews, lists Saturday hours); Royal Appliance (3.2 miles away, 4.3 stars from 29 reviews); ALAN'S Appliance Service (2.0 miles away, 4.4 stars from 48 reviews).
Know which Kenmore washer you have before you call. Kenmore makes top-load agitator, top-load impeller, front-load, and all-in-one combo models, and the technician will ask.
Kenmore Washer Lines Technicians Work On
What Makes Kenmore Washer Repairs Different
Top load models are built with either a Triple Action Agitator or an agitator-free impeller wash plate, which changes the parts and wash motion a technician works on. Source: Kenmore - Laundry Helper: Kenmore Washer Buying Guide
Front load models use Smart Motion, where the control varies drum movement to produce up to six different wash motions. Source: Kenmore - Laundry Helper: Kenmore Washer Buying Guide
When to Call for Kenmore Washer Repair
- Washer will not start or the lid or door stays locked
- Musty or mildew smell from the drum or door seal
- Washer fills slowly, will not fill, or keeps filling
Inside a Washer Repair Visit
Keeping a Kenmore Washer Running
- Every few months, run the empty washer on hot water with two cups of white vinegar to clear detergent residue and grime. Source: Kenmore - Appliance Maintenance Tips to Help Maximize Efficiency
- Avoid packing in extra-large loads and follow the detergent maker's dosing for each load. Source: Kenmore - Tips for Washing Extra Large Loads of Laundry
Brand guides: Kenmore Washer Not Draining or Spinning: Fixes.
Budgeting for a Kenmore Washer Repair
Most Kenmore washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Kenmore Washer Call
- How old the washer is
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Laundry Notes for Cedar City, UT
Most washer calls in Cedar City come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Hiring a Washer Repair Company in Cedar City
- Can you give a written estimate before ordering parts?
- Is your company licensed where my state requires it, and insured?
- How often do you repair Kenmore washers, and how quickly can you get parts?
Kenmore Washer Repair FAQs: Cedar City, UT
Why does my Kenmore washer show an error code?
Is my Kenmore washer worth repairing?
Why won't my washer spin?
Why does my front-load washer smell?
Other Washer Repair in Cedar City
Kenmore Washer Repair Near Cedar City
Before you call, find the model and serial number on your Kenmore washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.