Serving St. George, Utah and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Kenmore Washer Repair in St. George, UT

A local list of independent Kenmore washing machine technicians for St. George and the Washington County area, plus a helpline that connects you with one.

Kenmore washer acting up in St. George?
Call our helpline to be connected with an independent technician who repairs Kenmore washers.
☎(866) 293-4411
✓9 companies listed for St. George✓Independent, not a manufacturer✓Public ratings & distances

Kenmore owners in St. George usually want two things from a repair company: experience with the brand and quick access to parts. Below are independent repair companies serving St. George, with those that mention Kenmore first, then the nearest appliance repair companies.

Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Kenmore. If your washer is still under manufacturer coverage, contact Kenmore directly.

If you bought your Kenmore at Sears, you do not need to go back to Sears for a repair. Independent technicians near St. George work on Kenmore washers regularly.

Independent Kenmore Washer Technicians, St. George UT

Our data shows 9 appliance repair companies inside a 60-mile radius of St. George. 4 list an address in St. George, and the rest are spread across Cedar City (2), Washington (1), and Hurricane (1). No company within 90 miles of St. George mentions Kenmore by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Nearest on the list: Appliance Solutions of Utah, around 0.7 miles out. The 8 rated companies in range average 4.4 stars. Because the nearest shops are farther out, ask each company whether St. George is inside its regular service area.

Washer & Dryer Repair
Mr. Appliance of St. George
580 W 400 N, St. George, UT 84770
2.8 mi from St. George
★★★★★ 4.8 (1,430 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
1770 Red Cliffs Dr, St. George, UT 84790
3.2 mi from St. George
★★★★ 4.1 (249 reviews)
Mentions washersSaturday hours
Appliance Repair
JJ Service and Repair
626 N 1100 E Apt C101, Washington, UT 84780
6.5 mi from St. George
★★★★★ 4.9 (107 reviews)
Appliance Repair
St George Appliance Repair
551 N 1400 E Ste 4, St. George, UT 84770
3.0 mi from St. George
★★★★ 4.0 (95 reviews)
Saturday hours
Appliance Repair
Appliance Solutions of Utah
344 Sunland Dr Ste 4, St. George, UT 84790
0.7 mi from St. George
★★★★ 3.9 (173 reviews)
Appliance Repair
Appliance Repair Center
408 N 480 W, Hurricane, UT 84737
17.1 mi from St. George
★★★★★ 4.9 (74 reviews)
Saturday hours
Appliance Repair
Mr Appliance
Mesquite, AZ 89024
31.3 mi from St. George
Appliance Repair
Royal Appliance
622 2675 N Unit 2, Cedar City, UT 84721
52.7 mi from St. George
★★★★½ 4.3 (29 reviews)
Appliance Repair
ALAN'S Appliance Service
920 N Main St, Cedar City, UT 84720
51.1 mi from St. George
★★★★½ 4.4 (48 reviews)

Companies are shown by relevance and distance from St. George. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.

Repair market snapshot: St. George, UT
Distance to the three closest (mi)0.7, 2.8, 3.0
Companies within 60 miles9
Name washers or washing machines in their listing2
Open on Saturdays (per listing)4
Rated 4.5 stars or higher (10+ reviews)3
Mention Kenmore0

Closest matches for St. George: Mr. Appliance of St. George (2.8 miles away, 4.8 stars from 1,430 reviews, lists Saturday hours); Sears Appliance Repair (3.2 miles away, 4.1 stars from 249 reviews, lists Saturday hours); JJ Service and Repair (6.5 miles away, based in Washington, 4.9 stars from 107 reviews); St George Appliance Repair (3.0 miles away, 4.0 stars from 95 reviews, lists Saturday hours).

⚡ One call to a Kenmore washer technician near you
☎(866) 293-4411

Know Your Kenmore Washer

Smart Motion TechnologyA front load wash system that combines up to six drum motions in a cycle.
Triple Action AgitatorA top load agitator design that combines spraying, agitator and basket motions to clean the load.

What a Kenmore Washer Technician Deals With

Some top load models use an adaptive motor that adjusts its power to each load. Source: Kenmore - Life Your Way Loves Kenmore Top Load Laundry

Top load models are built with either a Triple Action Agitator or an agitator-free impeller wash plate, which changes the parts and wash motion a technician works on. Source: Kenmore - Laundry Helper: Kenmore Washer Buying Guide

Signs Your Kenmore Washer Needs a Technician

  • Burning smell or a motor that hums without turning
  • An error code on the display
  • Washer will not spin, or clothes come out soaking wet

How a Washer Service Call Usually Goes in St. George

Water level sensingA pressure switch or sensor tells the control how much water is in the tub. A blocked air tube or failed switch can cause overfilling, underfilling or a washer that will not move on to the next step.
Suspension and shocksShock absorbers, dampers or suspension rods keep the tub from slamming during the spin. Worn parts cause banging, off-balance shutdowns and a washer that walks across the floor.

Care Kenmore Recommends for Its Washers

Brand guides: Kenmore Washer Not Draining or Spinning: Fixes.

Budgeting for a Kenmore Washer Repair

Price the repair before replacing a Kenmore washer. Published ranges for common jobs:

For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Before the Technician Arrives

  • Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
  • What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
  • Where the washer drains (standpipe or laundry sink)

What St. George Owners Should Know

Most washer calls in St. George come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308

In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.

Before You Book in St. George

  • What is the service call or diagnostic fee, and is it applied to the repair?
  • Can you give a written estimate before ordering parts?
  • If a part has to be ordered, how soon can you come back to finish?

Kenmore Washer Repair FAQs: St. George, UT

Should I repair or replace my Kenmore washer?
Compare the repair quote with the price of a comparable new washer and consider its age. Lid switches, door locks, inlet valves, belts and drain pumps are modest repairs on a washer that is otherwise sound. Our repair-cost guide shows published ranges.
Why does my Kenmore washer show an error code?
Write the code down, check the brand's guidance for it and clear simple causes such as a clogged drain filter, a kinked hose or an unbalanced load. If the code returns, a technician can test the part the code points to.
Why won't my washer spin?
An unbalanced load, water that will not drain, or a lid switch or door lock that is not engaging stops most spin cycles. If those check out, a technician looks at the drive belt, motor coupling, motor and control.
Where is the water under my washer coming from?
Common sources are a loose or cracked fill hose, the drain hose connection, a torn door boot on a front loader, too much detergent causing suds overflow, or a leaking pump or tub seal. Unplug the washer and shut both valves, then look where the water starts.

More Washing Machine Repair in St. George, UT

More Kenmore Washer Repair Pages Nearby

Before you call, find the model and serial number on your Kenmore washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.

Call to reach an independent Kenmore washer tech
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech