Most Electrolux washer repairs in Logan involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Logan list starts with companies that name Electrolux, followed by other appliance repair companies that work on washers.
Washing Machine Repair Near Me is independent and not affiliated with Electrolux. Listed companies are independent technicians who repair Electrolux washers and other brands.
Electrolux Washer Repair Near Logan
Within 60 miles of Logan there are 29 appliance repair companies in our data. 1 of them are based in Logan itself, and the rest are spread across Smithfield (3), Ogden (3), and Clearfield (3). Distances run up to about 60 miles. The closest is Cache Appliance, about 0.4 miles away. None of the repair companies near Logan name Electrolux in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Across 21 rated companies, the average public rating is 4.4 stars. Logan is a smaller market, so expect a longer drive and ask whether a trip charge applies.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Open on Saturdays (per listing) | 17 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 14 |
| Mention washer work | 1 |
| Distance to the three closest (mi) | 0.4, 4.5, 4.5 |
| Appliance repair companies in range (60 mi) | 29 |
| Mention Electrolux | 0 |
At the top of the Logan list: R.A.C.E.R. Service Appliance Repair (4.5 miles away, based in Nibley, 4.7 stars from 12 reviews); Cache Appliance (0.4 miles away, 5.0 stars from 560 reviews); Darrell's Appliance Service And Sales Inc (4.5 miles away, based in Smithfield, 4.7 stars from 639 reviews, lists Saturday hours); Chandler’s Appliance (7.1 miles away, based in Smithfield, 5.0 stars from 42 reviews, lists Saturday hours).
Electrolux sells front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Electrolux Washer Lines Technicians Work On
How Electrolux Washers Are Built
Supply pressure is specified at 30 to 120 psi with no more than about 10 psi difference between hot and cold, and the inlet connectors carry filters that can clog. Source: Electrolux - Laundry Water Supply Guide
Electrolux Washer Symptoms and First Checks
- Shaking, thumping or off balance. Confirm shipping bolts and foam were removed, level the washer on a solid floor, and redistribute or add a couple of similar items to an unbalanced load. Source: Electrolux - Laundry Washers Noises Guide
- Door won't lock / door error. Make sure the door shuts fully with nothing caught in it, listen for the latch click, and check the latch and striker. Source: Electrolux - Front loading washer Error Code E41 door is open
What Electrolux Washer Codes Mean
| Code | What it means |
|---|---|
| E41 | The control board reads the door switch as open. Source: Electrolux - Front loading washer Error Code E41 door is open |
| HO SE | The hot and cold inlet hoses are connected to the wrong inlets. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection |
| E42 | The door lock is not being recognized. Source: Electrolux - Front loading washer Error Code E42 door lock device failure |
Electrolux Washer Problems Worth a Service Call
- Water on the floor under or in front of the washer
- Washer will not start or the lid or door stays locked
- Burning smell or a motor that hums without turning
Inside a Washer Repair Visit
Owner Care for Electrolux Washers
- Connect the washer with new fill hoses and rubber washers, swap flood-safe hoses for standard washer hoses, and hand-tighten plus about two-thirds of a turn without cross-threading. Source: Electrolux - Laundry Water Supply Guide
- Use high-efficiency (HE) detergent, keep each dispenser compartment below its max fill line, and put detergent packs in the drum rather than the dispenser. Source: Electrolux - Laundry Washers Detergent Guide
What Electrolux Washer Repairs Cost
Price the repair before replacing a Electrolux washer. Published ranges for common jobs:
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Any error code shown on the display
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- How old the washer is
What Logan Owners Should Know
Most washer calls in Logan come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
How to Choose a Washing Machine Technician Near Logan
- How often do you repair Electrolux washers, and how quickly can you get parts?
- What is the service call or diagnostic fee, and is it applied to the repair?
- Can you give a written estimate before ordering parts?
Electrolux Washer Repair FAQs: Logan, UT
Do you work for Electrolux?
Why is my washer leaking?
How do I find a technician who knows Electrolux washers?
What should I do about a Electrolux error code?
Related Repair Pages for Logan
Electrolux Washer Repair Near Logan
Electrolux Washer Repair for Towns Near Logan
Electrolux washer repair for Providence, Nibley, and Hyrum is handled by the same companies listed for Logan. Each town also has its own washing machine repair page with the nearest companies:
Before you call, find the model and serial number on your Electrolux washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.