Most GE washer repairs in Logan involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving Logan, with those that mention GE first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on GE Washers Near Logan
29 repair companies serve Logan from within 60 miles. 1 list an address in Logan, and other nearby bases include Smithfield (3), Ogden (3), and Clearfield (3). Distances run up to about 60 miles. No company within 60 miles of Logan names GE in its listing, so the list adds matches from farther out and the closest appliance repair companies. Cache Appliance is the nearest, roughly 0.4 miles from Logan. Across 21 rated companies, the average public rating is 4.4 stars. Logan is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Companies are shown by relevance and distance from Logan. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Three nearest companies, miles away | 0.4, 4.5, 4.5 |
|---|---|
| Listing Saturday hours | 17 |
| With 4.5+ stars and at least 10 reviews | 14 |
| Repair companies inside 60 miles | 29 |
| Mention washer work | 1 |
| Mention GE | 0 |
The leading options for Logan are General Electric Appliance (68.0 miles away, based in Salt Lake City, 2.8 stars from 4 reviews, lists Saturday hours); Cache Appliance (0.4 miles away, 5.0 stars from 560 reviews); R.A.C.E.R. Service Appliance Repair (4.5 miles away, based in Nibley, 4.7 stars from 12 reviews); Darrell's Appliance Service And Sales Inc (4.5 miles away, based in Smithfield, 4.7 stars from 639 reviews, lists Saturday hours).
Know which GE washer you have before you call. GE makes top-load agitator, top-load impeller, front-load, and all-in-one combo models, and the technician will ask.
GE Washer Lines Technicians Work On
How GE Washers Are Built
The drain hose should use the included anti-siphon clip and must not be pushed too deep into the standpipe or taped in place, which can siphon water out of the washer. Source: GE Appliances - Front Load Washer - Troubleshooting
Too much or non-HE detergent can cause oversudsing that slows the final spin and triggers a suds lock. Source: GE Appliances - Frequently Asked Questions About GE Washers
What GE Says to Check First
- Lid won't unlock. Wait for the basket to coast to a complete stop after spinning, since the lid stays locked until it does. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
- Washer leaking. Clean the underside and folds of the door gasket, make sure the detergent drawer is closed and not clogged, use less HE detergent, and inspect the fill and drain hoses. Source: GE Appliances - Front Load Washer - Leaking Water
Reading a GE Washer Error Code
| Code | What it means |
|---|---|
| LId | The cycle stopped because the lid is open, or the lid was not opened between several cycles. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights |
| UE | The load is unbalanced; spread the laundry evenly and make sure the washer is level. Source: GE Appliances - Washer - Consumer Help Indicator |
| CAnCELEd | The cycle was paused for more than a day or was stopped by certain errors. Source: GE Appliances - Washer - Consumer Help Indicator |
GE Washer Problems Worth a Service Call
- Water left in the drum after the cycle
- Washer will not start or the lid or door stays locked
- Grinding or roaring noise that rises with spin speed
How a Washer Service Call Usually Goes in Logan
Keeping a GE Washer Running
- Clean the detergent dispenser trays and housing at least once a month to clear product buildup. Source: GE Appliances - Front Load Washer - Leaking Water
- To clean a top load tub, fill it with hot water at the highest level, add a cup of chlorine bleach, and run a regular wash cycle. Source: GE Appliances - Frequently Asked Questions About GE Washers
Brand guides: GE Washer Not Draining or Spinning: What to Check.
GE Washer Repair Cost Ranges
A GE washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
What Logan Owners Should Know
Most washer calls in Logan come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Hiring a Washer Repair Company in Logan
- What is the service call or diagnostic fee, and is it applied to the repair?
- How often do you repair GE washers, and how quickly can you get parts?
- Do you work on front-load and top-load washers, or only one type?
GE Washer Repair FAQs: Logan, UT
Why is my washer leaking?
Which Logan technicians work on GE?
What stops a washer from spinning?
Do you work for GE?
Other Washer Repair in Logan
GE Washer Repair in Nearby Cities
Before you call, find the model and serial number on your GE washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.