If your GE washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. We flag companies whose listing or website mentions GE and fill in with nearby appliance repair companies so you always have options.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by GE. If your washer is still under manufacturer coverage, contact GE directly.
Who Works on GE Washers Near Hyrum
We found 38 appliance repair companies within 60 miles of Hyrum. Other nearby bases include Salt Lake City (7), Smithfield (3), and Ogden (3). Distances run up to about 60 miles. The closest is R.A.C.E.R. Service Appliance Repair, about 3.0 miles away. None of the companies within 60 miles mention GE by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. Rated companies nearby average 4.6 stars across 28 businesses. Because the nearest shops are farther out, ask each company whether Hyrum is inside its regular service area.
Companies are shown by relevance and distance from Hyrum. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Three nearest companies, miles away | 3.0, 7.7, 11.5 |
|---|---|
| Mention GE | 0 |
| Companies within 60 miles | 38 |
| Rated 4.5 stars or higher (10+ reviews) | 16 |
| Name washers or washing machines in their listing | 1 |
| Open on Saturdays (per listing) | 24 |
At the top of the Hyrum list: General Electric Appliance (60.4 miles away, based in Salt Lake City, 2.8 stars from 4 reviews, lists Saturday hours); Cache Appliance (7.7 miles away, based in Logan, 5.0 stars from 560 reviews); R.A.C.E.R. Service Appliance Repair (3.0 miles away, based in Nibley, 4.7 stars from 12 reviews); Darrell's Appliance Service And Sales Inc (11.5 miles away, based in Smithfield, 4.7 stars from 639 reviews, lists Saturday hours).
Know Your GE Washer
What Makes GE Washer Repairs Different
On electronic top load models the lid locks automatically during parts of the cycle and stays locked until the basket has coasted to a full stop. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
Too much or non-HE detergent can cause oversudsing that slows the final spin and triggers a suds lock. Source: GE Appliances - Frequently Asked Questions About GE Washers
What GE Says to Check First
- Lid won't unlock. Wait for the basket to coast to a complete stop after spinning, since the lid stays locked until it does. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
- Front load washer not draining. Check the drain hose for kinks and correct standpipe placement, clean the pump filter at the bottom front, and rebalance the load. Source: GE Appliances - Front Load Washer - Troubleshooting
What GE Washer Codes Mean
| Code | What it means |
|---|---|
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
| FE | Water has reached a critical level; shut off water and power and call for service. Source: GE Appliances - Washer - Consumer Help Indicator |
| H2O SUPPLY / IE | Water is not reaching the washer; check the house supply and that both valves are open. Source: GE Appliances - Washer - Consumer Help Indicator |
Signs Your GE Washer Needs a Technician
- An error code on the display
- Grinding or roaring noise that rises with spin speed
- Washer fills slowly, will not fill, or keeps filling
How a Washer Service Call Usually Goes in Hyrum
Owner Care for GE Washers
- Leave a top load lid up when the washer is not in use so the inside can dry out. Source: GE Appliances - Frequently Asked Questions About GE Washers
- Wipe the front load door gasket, including its folds and edge, after each wash to remove soil and soap residue. Source: GE Appliances - Front Load Washer - Leaking Water
Brand guides: GE Washer Not Draining or Spinning: What to Check.
What GE Washer Repairs Cost
Most GE washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
What Hyrum Owners Should Know
Most washer calls in Hyrum come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Hiring a Washer Repair Company in Hyrum
- If the washer is leaking, will you find where the water starts before quoting a part?
- Can you give a written estimate before ordering parts?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
GE Washer Repair FAQs: Hyrum, UT
Why won't my washer spin?
Why does my front-load washer smell?
How do I find a technician who knows GE washers?
Where is the water under my washer coming from?
Related Repair Pages for Hyrum
GE Washer Repair in Nearby Cities
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a GE repair.