A GE washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. Below are independent repair companies serving Perry, with those that mention GE first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
GE Washer Repair Near Perry
21 repair companies serve Perry from within 30 miles. Other nearby bases include Ogden (3), Smithfield (3), and Clearfield (3). Distances run up to about 30 miles. Nearest on the list: Murphy's Appliance Sales & Services, around 3.3 miles out. None of the companies within 30 miles mention GE by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. Rated companies nearby average 4.5 stars across 16 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| With 4.5+ stars and at least 10 reviews | 11 |
|---|---|
| Mention GE | 0 |
| Three nearest companies, miles away | 3.3, 10.6, 11.5 |
| Open on Saturdays (per listing) | 12 |
| Name washers or washing machines in their listing | 1 |
| Companies within 30 miles | 21 |
At the top of the Perry list: General Electric Appliance (49.6 miles away, based in Salt Lake City, 2.8 stars from 4 reviews, lists Saturday hours); Cache Appliance (21.9 miles away, based in Logan, 5.0 stars from 560 reviews); Ben Lomond Appliance Repair llc (10.6 miles away, based in North Ogden, 5.0 stars from 155 reviews, lists Saturday hours); iFiX, LLC (20.5 miles away, based in Riverdale, 4.9 stars from 436 reviews).
GE sells top-load agitator, top-load impeller, front-load, and all-in-one combo washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your GE Washer
How GE Washers Are Built
The drain hose should use the included anti-siphon clip and must not be pushed too deep into the standpipe or taped in place, which can siphon water out of the washer. Source: GE Appliances - Front Load Washer - Troubleshooting
GE Washer Symptoms and First Checks
- Washer not draining. Wait out normal pauses between cycle steps, then look for a kinked or clogged drain hose, a drain set too high, or a clog shown by a Po code or flashing Rinse light. Source: GE Appliances - Top Load Washer - Will Not Drain
- Washer leaking. Clean the underside and folds of the door gasket, make sure the detergent drawer is closed and not clogged, use less HE detergent, and inspect the fill and drain hoses. Source: GE Appliances - Front Load Washer - Leaking Water
GE Washer Error Codes
| Code | What it means |
|---|---|
| FE | Water has reached a critical level; shut off water and power and call for service. Source: GE Appliances - Washer - Consumer Help Indicator |
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
| LId | The cycle stopped because the lid is open, or the lid was not opened between several cycles. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights |
When to Call for GE Washer Repair
- Water left in the drum after the cycle
- Grinding or roaring noise that rises with spin speed
- Washer fills slowly, will not fill, or keeps filling
What a Washing Machine Technician Checks
Owner Care for GE Washers
- To clean a top load tub, fill it with hot water at the highest level, add a cup of chlorine bleach, and run a regular wash cycle. Source: GE Appliances - Frequently Asked Questions About GE Washers
- Leave a top load lid up when the washer is not in use so the inside can dry out. Source: GE Appliances - Frequently Asked Questions About GE Washers
Brand guides: GE Washer Not Draining or Spinning: What to Check.
Budgeting for a GE Washer Repair
Most GE washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Local Notes for Perry
Most washer calls in Perry come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Hiring a Washer Repair Company in Perry
- Do you work on front-load and top-load washers, or only one type?
- Will you check the drain pump filter and drain hose before replacing the pump?
- Is your company licensed where my state requires it, and insured?
GE Washer Repair FAQs: Perry, UT
Do you work for GE?
How do I find a technician who knows GE washers?
Why does my front-load washer smell?
Related Repair Pages for Perry
GE Washer Repair Near Perry
Write down any error code your GE washer shows and at what point in the cycle it appears. It helps a Perry technician bring the right parts.