If your Maytag washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Perry list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
Washing Machine Repair Near Me is independent and not affiliated with Maytag. Listed companies are independent technicians who repair Maytag washers and other brands.
Who Works on Maytag Washers Near Perry
Our data shows 21 appliance repair companies inside a 30-mile radius of Perry. The rest are spread across Ogden (3), Smithfield (3), and Clearfield (3). Murphy's Appliance Sales & Services is the nearest, roughly 3.3 miles from Perry. None of the repair companies near Perry name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The 16 rated companies in range average 4.5 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| With 4.5+ stars and at least 10 reviews | 11 |
|---|---|
| Three nearest companies, miles away | 3.3, 10.6, 11.5 |
| Mention Maytag | 0 |
| Repair companies inside 30 miles | 21 |
| Mention washer work | 1 |
| Open on Saturdays (per listing) | 12 |
The leading options for Perry are Ben Lomond Appliance Repair llc (10.6 miles away, based in North Ogden, 5.0 stars from 155 reviews, lists Saturday hours); R.A.C.E.R. Service Appliance Repair (18.0 miles away, based in Nibley, 4.7 stars from 12 reviews); Dick Kearsley Service Center (24.8 miles away, based in Clearfield, 4.6 stars from 609 reviews, lists Saturday hours); Murphy's Appliance Sales & Services (3.3 miles away, based in Brigham City, 4.5 stars from 60 reviews, lists Saturday hours).
Know which Maytag washer you have before you call. Maytag makes top-load agitator, top-load impeller, and front-load models, and the technician will ask.
Maytag Washer Lines and Features
What a Maytag Washer Technician Deals With
A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information
Maytag Washer Symptoms and First Checks
- Washer leaking. Maytag points first to loose inlet hose connections or missing hose washers, then to the drain hose and a backed-up household drain, and to clothes added mid-cycle that raise the water over the tub. Source: Maytag Product Help - Leaking Water Underneath - Washer
- Washer odor. Maytag links odor to skipped cleanings, wet loads left sitting and too much detergent or softener, and recommends regular washer cleaning and moving loads out promptly. Source: Maytag - How to repair a washing machine (top load)
What Maytag Washer Codes Mean
| Code | What it means |
|---|---|
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
| F5E2 | Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code |
Signs Your Maytag Washer Needs a Technician
- Washer will not spin, or clothes come out soaking wet
- Washer will not start or the lid or door stays locked
- An error code on the display
What a Washing Machine Technician Checks
Keeping a Maytag Washer Running
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
- Use only HE detergent in HE washers and measure it per the detergent maker's directions, since too much causes oversudsing, poor rinsing and residue. Source: Maytag Product Help - HE Detergent use in a Washer
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
What Maytag Washer Repairs Cost
Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Maytag Washer Call
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- How old the washer is
- Any error code shown on the display
Around Perry
Most washer calls in Perry come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Hiring a Washer Repair Company in Perry
- What guarantee do you give on parts and labor?
- Is your company licensed where my state requires it, and insured?
- What is the service call or diagnostic fee, and is it applied to the repair?
Maytag Washer Repair FAQs: Perry, UT
Should I repair or replace my Maytag washer?
How do I get rid of a washer mildew smell?
Do you work for Maytag?
Related Repair Pages for Perry
Maytag Washer Repair Near Perry
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.