If your GE washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. Below are independent repair companies serving Provo, with those that mention GE first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on GE Washers Near Provo
Within 30 miles of Provo there are 40 appliance repair companies in our data. 7 list an address in Provo, and the rest are spread across Orem (9), American Fork (5), and Springville (4). The farthest listed company is about 16 miles out. No company within 30 miles of Provo names GE in its listing, so the list adds matches from farther out and the closest appliance repair companies. Nearest on the list: Appliance Repair Provo Pros, around 0.9 miles out. Across 28 rated companies, the average public rating is 4.4 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention GE | 0 |
|---|---|
| Three nearest companies, miles away | 0.9, 1.4, 2.0 |
| Mention washer work | 4 |
| With 4.5+ stars and at least 10 reviews | 11 |
| Open on Saturdays (per listing) | 42 |
| Repair companies inside 30 miles | 60 |
At the top of the Provo list: General Electric Appliance (37.5 miles away, based in Salt Lake City, 2.8 stars from 4 reviews, lists Saturday hours); Brothers Masters (4.3 miles away, 5.0 stars from 30 reviews, lists Saturday hours); Sears Appliance Repair (8.5 miles away, based in Spanish Fork, 4.3 stars from 52 reviews, lists Saturday hours); Refrigerate (7.7 miles away, based in Lindon, 4.0 stars from 297 reviews, lists Saturday hours).
GE sells top-load agitator, top-load impeller, front-load, and all-in-one combo washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
GE Washer Lines and Features
What a GE Washer Technician Deals With
Too much or non-HE detergent can cause oversudsing that slows the final spin and triggers a suds lock. Source: GE Appliances - Frequently Asked Questions About GE Washers
Electronic models sense load size and type before and during fill, and they detect an out-of-balance load and try to redistribute it, which can keep the spin from reaching full speed. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
Common GE Washer Problems
- Front load washer not draining. Check the drain hose for kinks and correct standpipe placement, clean the pump filter at the bottom front, and rebalance the load. Source: GE Appliances - Front Load Washer - Troubleshooting
- Washer smells. Leave the lid up between uses so the inside can dry, since closing it too soon can cause a mildew odor. Source: GE Appliances - Frequently Asked Questions About GE Washers
Reading a GE Washer Error Code
| Code | What it means |
|---|---|
| dE / E2 | The lid was opened during the cycle; close it and press Start to resume. Source: GE Appliances - Washer - Consumer Help Indicator |
| LId | The cycle stopped because the lid is open, or the lid was not opened between several cycles. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights |
| FE | Water has reached a critical level; shut off water and power and call for service. Source: GE Appliances - Washer - Consumer Help Indicator |
GE Washer Problems Worth a Service Call
- Water on the floor under or in front of the washer
- An error code on the display
- Washer will not spin, or clothes come out soaking wet
What Gets Fixed on a Provo Washer Call
Care GE Recommends for Its Washers
- On models with UltraFresh Vent, run the vent cycle at the end of each day you do laundry. Source: GE Appliances - Front Load Washer - UltraFresh Vent System with OdorBlock
- Leave a top load lid up when the washer is not in use so the inside can dry out. Source: GE Appliances - Frequently Asked Questions About GE Washers
Brand guides: GE Washer Not Draining or Spinning: What to Check.
Budgeting for a GE Washer Repair
A GE washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a GE Washer Call
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Any error code shown on the display
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Laundry Notes for Provo, UT
Provo City Water Resources (Provo Public Works), which supplies Provo, reports hardness of typically 10-15 grains per gallon; the city describes it as moderately hard. Hard water leaves scale on washer inlet screens and heating parts and calls for the right detergent dose, which is worth mentioning when you book a repair. Source: Provo City - 2025 Water Quality Report
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Questions to Ask a Provo Washer Technician
- If a part has to be ordered, how soon can you come back to finish?
- What is the service call or diagnostic fee, and is it applied to the repair?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
GE Washer Repair FAQs: Provo, UT
What should I do about a GE error code?
What stops a washer from spinning?
Do you work for GE?
Related Repair Pages for Provo
More GE Washer Repair Pages Nearby
Before you call, find the model and serial number on your GE washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.