Serving Provo, Utah and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Provo, UT

Washing machine repair from independent technicians serving Provo, with ratings, distances and what to check before you call.

Need washer repair in Provo?
One call connects you with a local technician who repairs front-load and top-load washers.
☎(866) 293-4411
✓12 companies listed for Provo✓Independent, not a manufacturer✓Public ratings & distances

Most washing machine breakdowns trace back to a short list of parts: the drain pump and its filter, the lid switch or door lock, the drive belt or motor coupling, the inlet valve and the suspension. We pull these listings from public business data, remove closed businesses, parts stores and unrelated trades, and put companies that mention washers at the top.

Local Washing Machine Repair in Provo, UT

40 repair companies serve Provo from within 30 miles. 7 list an address in Provo, and the rest are spread across Orem (9), American Fork (5), and Springville (4). 4 of them mention washing machine or washer work in their listing or website. The closest is Appliance Repair Provo Pros, about 0.9 miles away. Rated companies nearby average 4.4 stars across 28 businesses.

Washer & Dryer Repair
PowerClean Appliance Repair
1206 E Waterside Cv APT 13, Midvale, UT 84047
28.0 mi from Provo
★★★★★ 4.9 (949 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Famous Appliance Service
7787 S Allen St, Midvale, UT 84047
28.1 mi from Provo
★★★★½ 4.6 (805 reviews)
Mentions washers
Washer & Dryer Repair
Brothers Masters
267 W Susannah Ln, Provo, UT 84604
4.3 mi from Provo
★★★★★ 5.0 (30 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Refrigerate
850 W 200 S Ste 1, Lindon, UT 84042
7.7 mi from Provo
★★★★ 4.0 (297 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
900 Expressway Ln, Spanish Fork, UT 84660
8.5 mi from Provo
★★★★½ 4.3 (52 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Eagle Appliance Repair
8543 S Redwood Rd C, West Jordan, UT 84088
28.7 mi from Provo
★★★★★ 4.9 (204 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Trusty Appliance Repair
8223 S 1000 E, Sandy, UT 84094
27.1 mi from Provo
★★★★★ 4.9 (313 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Appliance Man
9069 State St, Sandy, UT 84070
26.8 mi from Provo
★★★★½ 4.7 (424 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
1200 Towne Centre Blvd Spc C Spc C, Provo, UT 84601
2.2 mi from Provo
★★½ 2.3 (3 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
9269 Village Shop Dr, Sandy, UT 84094
26.0 mi from Provo
★★★★½ 4.3 (134 reviews)
Mentions washersSaturday hours
Appliance Repair
Utah Appliance Rental
841 Beckys Cove, Orem, UT 84097
2.9 mi from Provo
★★★★★ 4.9 (51 reviews)
CommercialSaturday hours
Washer & Dryer Repair
Liberty Appliance Service
7787 S Allen St, Midvale, UT 84047
28.6 mi from Provo
★★★★ 3.8 (19 reviews)
Mentions washers

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

By the numbers: technicians near Provo
Distance to the three closest (mi)0.9, 1.4, 2.0
Name washers or washing machines in their listing4
Mention a major washer brand0
Appliance repair companies in range (30 mi)60
Rated 4.5 stars or higher (10+ reviews)11
Listing Saturday hours42

First up for Provo: PowerClean Appliance Repair (28.0 miles away, based in Midvale, 4.9 stars from 949 reviews, lists Saturday hours); Famous Appliance Service (28.1 miles away, based in Midvale, 4.6 stars from 805 reviews); Brothers Masters (4.3 miles away, 5.0 stars from 30 reviews, lists Saturday hours); Refrigerate (7.7 miles away, based in Lindon, 4.0 stars from 297 reviews, lists Saturday hours).

⚡ Get connected with a washer technician near Provo
☎(866) 293-4411

Signs Your Washing Machine Needs a Technician

  • Washer fills slowly, will not fill, or keeps filling
  • Loud banging, shaking or walking during the spin
  • Burning smell or a motor that hums without turning
  • Grinding or roaring noise that rises with spin speed

What Usually Goes Wrong

Belts, couplers and motorsDepending on the design, the motor turns the drum through a belt, a motor coupling or a direct-drive rotor. A worn belt, broken coupler or failed motor leaves the drum still while the washer hums or fills.
Hoses, seals and the door bootFill hoses age and crack, drain hose clamps loosen, and the rubber door boot on a front loader can tear or trap water. Leaks usually start small under the washer before they show on the floor.
Suspension and bearingsShock absorbers, dampers and springs hold the tub steady during the spin. When they wear, the washer bangs and walks. Worn drum bearings make a rumbling or grinding noise that gets louder on the spin cycle.

What a Washing Machine Technician Checks

Lid switch or door lockTop loaders use a lid switch or lid lock and front loaders use a door lock. If the control cannot confirm the lid or door is shut and locked, the washer will not fill, agitate or spin, and a technician tests the switch and its wiring.
Drive belt, coupler and motorBelt-drive washers turn the drum with a belt; others use a motor coupling or a direct-drive motor bolted to the tub. A hum with no movement, a burning smell or a drum that turns by hand too easily points here.
Door boot and leaksOn front loaders the rubber door boot can tear or hold water and debris. A technician follows any leak back to its source, which may be the boot, a hose clamp, the pump, the inlet valve or the tub.

Troubleshooting first? Start with front-load vs top-load washer problems or washer not draining.

If Your Washer Is Leaking

Whirlpool recommends replacing washer fill hoses every five years to lower the risk of a hose failing and leaking. Source: Whirlpool - Washing Machine Fill Hoses

Plug the washer into a grounded three-prong outlet on a 15- or 20-amp 120-volt circuit, and never remove the ground prong or use an adapter or extension cord. Source: Whirlpool - Washer Installation Instructions

More: where washer leaks come from.

What Washer Repair Costs in Provo

A washer repair is usually a single part plus labor. Reference ranges from published cost guides:

For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

What Provo Owners Should Know

Provo City Water Resources (Provo Public Works), which supplies Provo, reports hardness of typically 10-15 grains per gallon; the city describes it as moderately hard. Hard water leaves scale on washer inlet screens and heating parts and calls for the right detergent dose, which is worth mentioning when you book a repair. Source: Provo City - 2025 Water Quality Report

Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308

In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.

How to Choose a Washing Machine Technician Near Provo

  • If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
  • How often do you repair your brand washers, and how quickly can you get parts?
  • What guarantee do you give on parts and labor?

Washing Machine Repair FAQs: Provo, UT

Why does my washer shake or walk across the floor?
An unbalanced load is the most common cause, followed by a washer that is not level. If it keeps happening with balanced loads on a level floor, worn shock absorbers, suspension springs or drum bearings are the likely cause, and a technician should check them.
What stops a washer from spinning?
An unbalanced load, water that will not drain, or a lid switch or door lock that is not engaging stops most spin cycles. If those check out, a technician looks at the drive belt, motor coupling, motor and control.
Do you cover Provo and nearby towns?
The companies on this page are within driving distance of Provo. Each one sets its own service area, so check the distance shown and confirm your address when you call.

Brand-Specific Washer Repair, Provo

More Washing Machine Repair Pages Nearby

Before you call a Provo technician, check that the washer is plugged in, the hot and cold valves behind it are open and the drain hose is not kinked. If it is a front loader, clean the drain pump filter. If the problem stays, have the model number ready.

Tell us what your washer is doing and we will connect you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech