GE owners in Cedar Hills usually want two things from a repair company: experience with the brand and quick access to parts. Below are independent repair companies serving Cedar Hills, with those that mention GE first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on GE Washers Near Cedar Hills
Our data shows 40 appliance repair companies inside a 30-mile radius of Cedar Hills. The rest are spread across Orem (9), American Fork (5), and Lehi (5). Distances run up to about 11 miles. No company within 30 miles of Cedar Hills names GE in its listing, so the list adds matches from farther out and the closest appliance repair companies. The closest is Paulesen Appliance Service., about 2.6 miles away. Rated companies nearby average 4.6 stars across 24 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Open on Saturdays (per listing) | 41 |
|---|---|
| Mention GE | 0 |
| Rated 4.5 stars or higher (10+ reviews) | 8 |
| Name washers or washing machines in their listing | 3 |
| Appliance repair companies in range (30 mi) | 60 |
| Distance to the three closest (mi) | 2.6, 2.8, 2.8 |
First up for Cedar Hills: General Electric Appliance (24.7 miles away, based in Salt Lake City, 2.8 stars from 4 reviews, lists Saturday hours); Brothers Masters (8.8 miles away, based in Provo, 5.0 stars from 30 reviews, lists Saturday hours); Refrigerate (5.6 miles away, based in Lindon, 4.0 stars from 297 reviews, lists Saturday hours); Vertex Appliance Repair (9.6 miles away, based in Saratoga Springs, 4.9 stars from 172 reviews).
GE Washer Lines Technicians Work On
What a GE Washer Technician Deals With
The drain hose should use the included anti-siphon clip and must not be pushed too deep into the standpipe or taped in place, which can siphon water out of the washer. Source: GE Appliances - Front Load Washer - Troubleshooting
GE Washer Symptoms and First Checks
- Lid won't unlock. Wait for the basket to coast to a complete stop after spinning, since the lid stays locked until it does. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
- Washer not spinning. Allow for pauses between cycle steps, confirm power and that the lid is fully closed, and redistribute the load if the Spin light flashes or the display reads balancing. Source: GE Appliances - Top Load Washer - Does Not Spin
Reading a GE Washer Error Code
| Code | What it means |
|---|---|
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
| CAnCELEd | The cycle was paused for more than a day or was stopped by certain errors. Source: GE Appliances - Washer - Consumer Help Indicator |
| dE / E2 | The lid was opened during the cycle; close it and press Start to resume. Source: GE Appliances - Washer - Consumer Help Indicator |
When to Call for GE Washer Repair
- Water on the floor under or in front of the washer
- Washer will not spin, or clothes come out soaking wet
- Musty or mildew smell from the drum or door seal
What Gets Fixed on a Cedar Hills Washer Call
Care GE Recommends for Its Washers
- On models with UltraFresh Vent, run the vent cycle at the end of each day you do laundry. Source: GE Appliances - Front Load Washer - UltraFresh Vent System with OdorBlock
- Wipe the front load door gasket, including its folds and edge, after each wash to remove soil and soap residue. Source: GE Appliances - Front Load Washer - Leaking Water
Brand guides: GE Washer Not Draining or Spinning: What to Check.
Budgeting for a GE Washer Repair
Price the repair before replacing a GE washer. Published ranges for common jobs:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Where the washer drains (standpipe or laundry sink)
- How old the washer is
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Laundry Notes for Cedar Hills, UT
Most washer calls in Cedar Hills come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Before You Book in Cedar Hills
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Do you work on front-load and top-load washers, or only one type?
- If a part has to be ordered, how soon can you come back to finish?
GE Washer Repair FAQs: Cedar Hills, UT
Where is the water under my washer coming from?
What stops a washer from spinning?
Is this GE customer service?
How do I get rid of a washer mildew smell?
Other Washer Repair in Cedar Hills
GE Washer Repair Near Cedar Hills
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a GE repair.