If your Electrolux washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. Below are independent repair companies serving Taylorsville, with those that mention Electrolux first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Electrolux, and the technicians listed are independent repair companies, not the manufacturer.
Independent Electrolux Washer Technicians, Taylorsville UT
Our data shows 40 appliance repair companies inside a 30-mile radius of Taylorsville. 4 of them are based in Taylorsville itself, and the rest are spread across West Jordan (12), West Valley City (6), and Midvale (6). The farthest listed company is about 6 miles out. No company within 90 miles of Taylorsville mentions Electrolux by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Nearest on the list: Elite Taylorsville Appliance Repair, around 0.5 miles out. The 25 rated companies in range average 4.6 stars.
Companies are shown by relevance and distance from Taylorsville. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Name washers or washing machines in their listing | 12 |
|---|---|
| Three nearest companies, miles away | 0.5, 0.5, 1.4 |
| Listing Saturday hours | 41 |
| Repair companies inside 30 miles | 60 |
| Mention Electrolux | 0 |
| With 4.5+ stars and at least 10 reviews | 13 |
At the top of the Taylorsville list: Mr. Appliance of Salt Lake City (3.9 miles away, based in Salt Lake City, 4.7 stars from 1,513 reviews, lists Saturday hours); Quality Appliance Service (4.5 miles away, based in West Valley City, 4.6 stars from 1,441 reviews); Eagle Appliance Repair (4.3 miles away, based in West Jordan, 4.9 stars from 204 reviews, lists Saturday hours); Famous Appliance Service (4.5 miles away, based in Midvale, 4.6 stars from 805 reviews).
Electrolux sells front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Electrolux Washer Lines Technicians Work On
What a Electrolux Washer Technician Deals With
Water level is monitored by a pressure sensor, which raises E35 when it reads an overfill condition. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill
What Electrolux Says to Check First
- Washer draining slowly. Clear kinks or clogs in the drain hose, check standpipe height and diameter, loosen any airtight tape seal, and avoid overdosing detergent. Source: Electrolux - What should I do if my washer is draining slowly?
- Washer not draining. Straighten any kinked drain hose first, then confirm the hot and cold supply lines are not reversed and the drain hose is installed per the manual. Source: Electrolux - Front loading washer Error Code E21 long pump out time
What Electrolux Washer Codes Mean
| Code | What it means |
|---|---|
| E11 | Long fill time; the washer is not filling during the wash phase. Source: Electrolux - Front loading washer Error Code E11 long fill time |
| E35 | The pressure sensor detects a water overfill. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill |
| E21 | Long pump-out time; water is not leaving the tub fast enough. Source: Electrolux - Front loading washer Error Code E21 long pump out time |
Electrolux Washer Problems Worth a Service Call
- Loud banging, shaking or walking during the spin
- Water left in the drum after the cycle
- Washer fills slowly, will not fill, or keeps filling
What a Washing Machine Technician Checks
Keeping a Electrolux Washer Running
- Use high-efficiency (HE) detergent, keep each dispenser compartment below its max fill line, and put detergent packs in the drum rather than the dispenser. Source: Electrolux - Laundry Washers Detergent Guide
- Connect the washer with new fill hoses and rubber washers, swap flood-safe hoses for standard washer hoses, and hand-tighten plus about two-thirds of a turn without cross-threading. Source: Electrolux - Laundry Water Supply Guide
Budgeting for a Electrolux Washer Repair
Price the repair before replacing a Electrolux washer. Published ranges for common jobs:
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Electrolux Washer Call
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Any error code shown on the display
- How old the washer is
Laundry Notes for Taylorsville, UT
Most washer calls in Taylorsville come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Questions to Ask a Taylorsville Washer Technician
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- How often do you repair Electrolux washers, and how quickly can you get parts?
- Can you give a written estimate before ordering parts?
Electrolux Washer Repair FAQs: Taylorsville, UT
Why is my washer leaking?
How do I get rid of a washer mildew smell?
What should I do about a Electrolux error code?
Which Taylorsville technicians work on Electrolux?
Other Washer Repair in Taylorsville
Electrolux Washer Repair in Nearby Cities
Before you call, find the model and serial number on your Electrolux washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.