Most Whirlpool washer repairs in Taylorsville involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving Taylorsville, with those that mention Whirlpool first, then the nearest appliance repair companies.
Washing Machine Repair Near Me is independent and not affiliated with Whirlpool. Listed companies are independent technicians who repair Whirlpool washers and other brands.
Who Works on Whirlpool Washers Near Taylorsville
40 repair companies serve Taylorsville from within 30 miles. 4 list an address in Taylorsville, and other nearby bases include West Jordan (12), West Valley City (6), and Midvale (6). No company within 90 miles of Taylorsville mentions Whirlpool by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Elite Taylorsville Appliance Repair is the nearest, roughly 0.5 miles from Taylorsville. Rated companies nearby average 4.6 stars across 25 businesses.
Companies are shown by relevance and distance from Taylorsville. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Rated 4.5 stars or higher (10+ reviews) | 13 |
|---|---|
| Repair companies inside 30 miles | 60 |
| Name washers or washing machines in their listing | 12 |
| Mention Whirlpool | 0 |
| Distance to the three closest (mi) | 0.5, 0.5, 1.4 |
| Listing Saturday hours | 41 |
The leading options for Taylorsville are Appliance Service By Paul (2.7 miles away, based in Salt Lake City, 4.8 stars from 2,590 reviews, lists Saturday hours); Mr. Appliance of Salt Lake City (3.9 miles away, based in Salt Lake City, 4.7 stars from 1,513 reviews, lists Saturday hours); Quality Appliance Service (4.5 miles away, based in West Valley City, 4.6 stars from 1,441 reviews); Famous Appliance Service (4.5 miles away, based in Midvale, 4.6 stars from 805 reviews).
Whirlpool sells top-load agitator, top-load impeller, front-load, all-in-one combo, and commercial washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Whirlpool Washer Lines and Features
What a Whirlpool Washer Technician Deals With
High-efficiency Whirlpool washers need HE detergent only, because excess suds can stop the pump from draining and the drum from spinning. Source: Whirlpool - HE Detergent use in a Washer
What Whirlpool Says to Check First
- Washer leaking. Check that the inlet hoses have their rubber washers and snug connections at both ends, then make sure the drain hose is secure and the house drain is not backing up. Source: Whirlpool - Leaking Water Underneath - Washer
- Washer shaking or walking. Remove the shipping bolts, adjust the feet until all four sit firmly on the floor, and spread heavy and light items evenly in the drum. Source: Whirlpool - Washer is Vibrating, Walking or Moving
Whirlpool Washer Error Codes
| Code | What it means |
|---|---|
| rL / F34 | Items were left in the drum when the Clean Washer cycle was started. Source: Whirlpool - Error Codes in Front Load Washers |
| F7 E1 | Motor speed sensing problem; check that shipping bolts are removed and the washer is not overloaded. Source: Whirlpool - Error Codes in Front Load Washers |
| Sud / Sd | Too many suds were detected, usually from non-HE or too much detergent. Source: Whirlpool - Error Codes in Front Load Washers |
Whirlpool Washer Problems Worth a Service Call
- Water on the floor under or in front of the washer
- Washer fills slowly, will not fill, or keeps filling
- Washer will not start or the lid or door stays locked
What Gets Fixed on a Taylorsville Washer Call
Keeping a Whirlpool Washer Running
- Check and brush clean the small mesh screens where the fill hoses connect at the back of the washer if filling slows. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
- Run the Clean Washer cycle once a month with affresh cleaner or regular liquid chlorine bleach to keep the washer fresh. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
What Whirlpool Washer Repairs Cost
Price the repair before replacing a Whirlpool washer. Published ranges for common jobs:
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- How old the washer is
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Where the washer drains (standpipe or laundry sink)
Local Notes for Taylorsville
Most washer calls in Taylorsville come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Before You Book in Taylorsville
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- If the washer is leaking, will you find where the water starts before quoting a part?
- Is your company licensed where my state requires it, and insured?
Whirlpool Washer Repair FAQs: Taylorsville, UT
How do I find a technician who knows Whirlpool washers?
Do you work for Whirlpool?
Why does my Whirlpool washer show an error code?
Why won't my washer spin?
Related Repair Pages for Taylorsville
Whirlpool Washer Repair Near Taylorsville
Write down any error code your Whirlpool washer shows and at what point in the cycle it appears. It helps a Taylorsville technician bring the right parts.