Most Whirlpool washer repairs in Midvale involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving Midvale, with those that mention Whirlpool first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Whirlpool, and the technicians listed are independent repair companies, not the manufacturer.
Independent Whirlpool Washer Technicians, Midvale UT
We found 40 appliance repair companies within 30 miles of Midvale. 6 list an address in Midvale, and other nearby bases include Sandy (14), West Jordan (7), and Taylorsville (3). The farthest listed company is about 5 miles out. No company within 90 miles of Midvale mentions Whirlpool by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Quality Midvale Appliance Repair is the nearest, roughly 0.4 miles from Midvale. Across 23 rated companies, the average public rating is 4.7 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Distance to the three closest (mi) | 0.4, 0.4, 0.8 |
|---|---|
| Mention washer work | 10 |
| Mention Whirlpool | 0 |
| With 4.5+ stars and at least 10 reviews | 13 |
| Repair companies inside 30 miles | 60 |
| Listing Saturday hours | 40 |
First up for Midvale: Appliance Service By Paul (2.0 miles away, based in Salt Lake City, 4.8 stars from 2,590 reviews, lists Saturday hours); Famous Appliance Service (1.3 miles away, 4.6 stars from 805 reviews); Trusty Appliance Repair (1.8 miles away, based in Sandy, 4.9 stars from 313 reviews, lists Saturday hours); Eagle Appliance Repair (2.7 miles away, based in West Jordan, 4.9 stars from 204 reviews, lists Saturday hours).
Know Your Whirlpool Washer
How Whirlpool Washers Are Built
Both top and front load models will only run their spin when the lid or door switch registers the lid or door as fully closed and latched. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
Common Whirlpool Washer Problems
- Washer not filling. Make sure both hot and cold supply valves are fully open, the fill hoses are not kinked, and the inlet screens are not clogged with sediment. Source: Whirlpool - Why won't my washing machine fill with water
- Washer won't start. Check that the washer is plugged in and the breaker has not tripped, turn off the control lock if it is on, and reset the washer by cutting power for at least a minute. Source: Whirlpool - How to reset a washing machine
Reading a Whirlpool Washer Error Code
| Code | What it means |
|---|---|
| Sud / Sd | Too many suds were detected, usually from non-HE or too much detergent. Source: Whirlpool - Error Codes in Front Load Washers |
| F8 E1 / Lo FL | Low water flow into the washer; check the supply faucets, fill hoses and any anti-flood devices. Source: Whirlpool - Error Codes in Front Load Washers |
| dEt | Detergent cartridge is not detected on models with a bulk dispenser. Source: Whirlpool - Error Codes in Front Load Washers |
Signs Your Whirlpool Washer Needs a Technician
- Loud banging, shaking or walking during the spin
- Water on the floor under or in front of the washer
- An error code on the display
What Gets Fixed on a Midvale Washer Call
Care Whirlpool Recommends for Its Washers
- Check and brush clean the small mesh screens where the fill hoses connect at the back of the washer if filling slows. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
- Clean the front load drain pump filter every few months or whenever lint builds up, on models that have one. Source: Whirlpool - Cleaning the Pump Filter - Front Load Washer
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
Budgeting for a Whirlpool Washer Repair
A Whirlpool washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Any error code shown on the display
Local Notes for Midvale
Most washer calls in Midvale come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Hiring a Washer Repair Company in Midvale
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- What is the service call or diagnostic fee, and is it applied to the repair?
- Do you work on front-load and top-load washers, or only one type?
Whirlpool Washer Repair FAQs: Midvale, UT
Where is the water under my washer coming from?
Should I repair or replace my Whirlpool washer?
What should I do about a Whirlpool error code?
How do I find a technician who knows Whirlpool washers?
Related Repair Pages for Midvale
More Whirlpool Washer Repair Pages Nearby
Write down any error code your Whirlpool washer shows and at what point in the cycle it appears. It helps a Midvale technician bring the right parts.