A Maytag washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. Below are independent repair companies serving Roy, with those that mention Maytag first, then the nearest appliance repair companies.
Washing Machine Repair Near Me is independent and not affiliated with Maytag. Listed companies are independent technicians who repair Maytag washers and other brands.
Who Works on Maytag Washers Near Roy
Our data shows 37 appliance repair companies inside a 30-mile radius of Roy. Other nearby bases include Salt Lake City (12), Clearfield (3), and Ogden (3). The closest is iFiX, LLC, about 1.7 miles away. No company within 90 miles of Roy mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 26 rated companies in range average 4.5 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Distance to the three closest (mi) | 1.7, 2.3, 2.7 |
|---|---|
| Repair companies inside 30 miles | 37 |
| Mention Maytag | 0 |
| Listing Saturday hours | 25 |
| Rated 4.5 stars or higher (10+ reviews) | 13 |
| Name washers or washing machines in their listing | 0 |
First up for Roy: Dick Kearsley Service Center (4.7 miles away, based in Clearfield, 4.6 stars from 609 reviews, lists Saturday hours); iFiX, LLC (1.7 miles away, based in Riverdale, 4.9 stars from 436 reviews); Ben Lomond Appliance Repair llc (11.0 miles away, based in North Ogden, 5.0 stars from 155 reviews, lists Saturday hours); Eagle Appliance Repair (3.9 miles away, based in Clearfield, 4.2 stars from 69 reviews).
Maytag Washer Lines Technicians Work On
What a Maytag Washer Technician Deals With
Select Maytag washers use commercial-grade technology that includes a stainless steel wash basket and a direct drive motor. Source: Maytag - Washers
Top load HE models use auto-sensing, spinning slowly to estimate the load before adding water in stages, so the water level can look lower than owners expect. Source: Maytag Product Help - Auto Sensing in a Top Load HE Washer
Common Maytag Washer Problems
- Washer leaking. Maytag points first to loose inlet hose connections or missing hose washers, then to the drain hose and a backed-up household drain, and to clothes added mid-cycle that raise the water over the tub. Source: Maytag Product Help - Leaking Water Underneath - Washer
- Washer not filling. Maytag says to make sure both faucets are fully open, the inlet hoses are not kinked, and the inlet screens on the water valve are not clogged. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Reading a Maytag Washer Error Code
| Code | What it means |
|---|---|
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
Signs Your Maytag Washer Needs a Technician
- Washer will not start or the lid or door stays locked
- Washer fills slowly, will not fill, or keeps filling
- Water left in the drum after the cycle
What Gets Fixed on a Roy Washer Call
Keeping a Maytag Washer Running
- Use only HE detergent in HE washers and measure it per the detergent maker's directions, since too much causes oversudsing, poor rinsing and residue. Source: Maytag Product Help - HE Detergent use in a Washer
- Run the Clean Washer cycle with a washer cleaning tablet about once a month, or when the clean washer light comes on or odor appears; without that cycle, use the hottest, highest water setting. Source: Maytag Product Help - Cleaning Washers with affresh
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Budgeting for a Maytag Washer Repair
Price the repair before replacing a Maytag washer. Published ranges for common jobs:
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Where the washer drains (standpipe or laundry sink)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Any error code shown on the display
Around Roy
Most washer calls in Roy come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Before You Book in Roy
- If a part has to be ordered, how soon can you come back to finish?
- Can you give a written estimate before ordering parts?
- Do you work on front-load and top-load washers, or only one type?
Maytag Washer Repair FAQs: Roy, UT
How do I find a technician who knows Maytag washers?
Why does my front-load washer smell?
Why is my washer leaking?
More Washing Machine Repair in Roy, UT
More Maytag Washer Repair Pages Nearby
Before you call, find the model and serial number on your Maytag washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.