Most washing machine breakdowns trace back to a short list of parts: the drain pump and its filter, the lid switch or door lock, the drive belt or motor coupling, the inlet valve and the suspension. Below are the companies within reach of Roy, sorted by how closely they match washing machine work, then by distance and public ratings.
Local Washing Machine Repair in Roy, UT
37 repair companies serve Roy from within 30 miles. Other nearby bases include Salt Lake City (12), Clearfield (3), and Ogden (3). Distances run up to about 30 miles. Across 26 rated companies, the average public rating is 4.5 stars. iFiX, LLC is the nearest, roughly 1.7 miles from Roy.
Companies are shown by relevance and distance from Roy. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Appliance repair companies in range (30 mi) | 37 |
|---|---|
| Listing Saturday hours | 25 |
| Rated 4.5 stars or higher (10+ reviews) | 13 |
| Mention a major washer brand | 1 |
| Mention washer work | 0 |
| Three nearest companies, miles away | 1.7, 2.3, 2.7 |
The leading options for Roy are iFiX, LLC (1.7 miles away, based in Riverdale, 4.9 stars from 436 reviews); Dick Kearsley Service Center (4.7 miles away, based in Clearfield, 4.6 stars from 609 reviews, lists Saturday hours); Eagle Appliance Repair Of Salt Lake City (21.3 miles away, based in West Bountiful, 5.0 stars from 98 reviews, lists Saturday hours); Ben Lomond Appliance Repair llc (11.0 miles away, based in North Ogden, 5.0 stars from 155 reviews, lists Saturday hours).
Signs Your Washing Machine Needs a Technician
- Grinding or roaring noise that rises with spin speed
- An error code on the display
- Burning smell or a motor that hums without turning
- Washer fills slowly, will not fill, or keeps filling
What Usually Goes Wrong
Inside a Washer Repair Visit
Troubleshooting first? Start with washer not spinning or washer not draining.
Before Anyone Touches the Washer
Turn off the water supply valves before disconnecting or reconnecting the washer's fill hoses. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection
Manufacturers require the washer to be electrically grounded and warn against using an extension cord or modifying the plug. Source: Maytag - High-Efficiency Washer Installation Instructions
Do not make an airtight seal between the drain hose and the standpipe or restrict the hose; standpipe height limits vary by model (Maytag's high-efficiency guide allows 18 to 96 inches). Source: Maytag - High-Efficiency Washer Installation Instructions
More: where washer leaks come from.
Washing Machine Repair Cost Ranges
Before replacing a washer in Roy, price the repair. Here is what published cost guides report for common jobs:
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Laundry Notes for Roy, UT
Most washer calls in Roy come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Hiring a Washer Repair Company in Roy
- How often do you repair your brand washers, and how quickly can you get parts?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Will you check the drain pump filter and drain hose before replacing the pump?
Washing Machine Repair FAQs: Roy, UT
Why is there water left in my washer?
What stops a washer from spinning?
Do you cover Roy and nearby towns?
Find Your Washer Brand in Roy
Washing Machine Repair in Nearby Cities
Before you call a Roy technician, check that the washer is plugged in, the hot and cold valves behind it are open and the drain hose is not kinked. If it is a front loader, clean the drain pump filter. If the problem stays, have the model number ready.