Serving Johnson City, Tennessee and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Johnson City, TN

Water left in the drum, a washer that will not spin or a puddle on the laundry room floor? Here are the companies that serve Johnson City.

Washer down in Johnson City?
One call connects you with a local technician who repairs front-load and top-load washers.
☎(866) 293-4411
✓12 companies listed for Johnson City✓Independent, not a manufacturer✓Public ratings & distances

When a washer quits in Johnson City, the first question is whether it is a clog or a setting you can clear yourself or a failed part, and that decides whether you need a technician at all. Below are the companies within reach of Johnson City, sorted by how closely they match washing machine work, then by distance and public ratings.

Washer Technicians Serving Johnson City, TN

We found 18 appliance repair companies within 30 miles of Johnson City. 4 of them are based in Johnson City itself, and the rest are spread across Bristol (3), Kingsport (3), and Greeneville (3). The farthest listed company is about 27 miles out. Sears Appliance Repair is the nearest, roughly 0.2 miles from Johnson City. 5 list washing machine or washer work specifically. Across 18 rated companies, the average public rating is 4.4 stars.

Washer & Dryer Repair
Mr. Appliance of the Tri-Cities
404 Roy Martin Rd Ste 50, Gray, TN 37615
7.4 mi from Johnson City
★★★★½ 4.5 (1,004 reviews)
Mentions washers
Washer & Dryer Repair
Sears Appliance Repair
2011 N Roan St, Johnson City, TN 37601
0.2 mi from Johnson City
★★★★½ 4.4 (277 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Real-Time Appliance Repairs
2694 Boones Creek Rd STE 2, Johnson City, TN 37615
3.5 mi from Johnson City
★★★★½ 4.4 (7 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
1805 E Stone Dr, Kingsport, TN 37660
15.9 mi from Johnson City
★★★★½ 4.5 (174 reviews)
Mentions LG, Samsung, WhirlpoolMentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
1355 Tusculum Blvd, Greeneville, TN 37745
25.8 mi from Johnson City
★★★★½ 4.5 (119 reviews)
Mentions washersSaturday hours
Appliance Repair
Reliance Appliance Repair
4451 N Roan St #204, Johnson City, TN 37615
3.4 mi from Johnson City
★★★★½ 4.6 (65 reviews)
Appliance Repair
Bean Heating Cooling & Appliance Repair
1657 E Stone Dr Ste B-108, Kingsport, TN 37660
16.2 mi from Johnson City
★★★★★ 5.0 (74 reviews)
Appliance Repair
Appliance Repair & Sales
1801 E Myrtle Ave, Johnson City, TN 37601
2.4 mi from Johnson City
★★★★ 4.1 (38 reviews)
Saturday hours
Appliance Repair
Major Appliance Headquarters
8245 E Andrew Johnson Hwy, Chuckey, TN 37641
19.7 mi from Johnson City
★★★★½ 4.4 (57 reviews)
Appliance Repair
Brad's fireside repairs
531 TN-91 Ste 2, Elizabethton, TN 37643
11.9 mi from Johnson City
★★★★★ 4.8 (32 reviews)
Appliance Repair
Stewarts Appliances
470 Pleasant Valley Rd, Jonesborough, TN 37659
7.6 mi from Johnson City
★★★★ 4.1 (13 reviews)
Appliance Repair
Buckingham Appliance Repair
2709 Buckingham Rd, Greeneville, TN 37745
26.5 mi from Johnson City
★★★★★ 4.8 (40 reviews)
Saturday hours

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

By the numbers: technicians near Johnson City
Repair companies inside 30 miles18
Distance to the three closest (mi)0.2, 2.4, 3.4
With 4.5+ stars and at least 10 reviews8
Listing Saturday hours7
Mention a major washer brand1
Mention washer work5

Closest matches for Johnson City: Mr. Appliance of the Tri-Cities (7.4 miles away, based in Gray, 4.5 stars from 1,004 reviews); Sears Appliance Repair (0.2 miles away, 4.4 stars from 277 reviews, lists Saturday hours); Real-Time Appliance Repairs (3.5 miles away, 4.4 stars from 7 reviews, lists Saturday hours); Sears Appliance Repair (15.9 miles away, based in Kingsport, 4.5 stars from 174 reviews, lists Saturday hours).

⚡ Tell us what your washer is doing and we will connect you
☎(866) 293-4411

Washer Problems Worth a Service Call

  • Burning smell or a motor that hums without turning
  • Water left in the drum after the cycle
  • Washer will not spin, or clothes come out soaking wet
  • Washer will not start or the lid or door stays locked

What Usually Goes Wrong

Water inlet valveAn electric valve behind the washer lets hot and cold water in. When it sticks or its screens clog, the washer fills slowly, not at all, or keeps filling.
Lid switches and door locksA washer will not fill, agitate or spin unless the lid switch or door lock tells the control the lid or door is shut and locked. A worn switch or failed lock is one of the most common parts replaced.
Suspension and bearingsShock absorbers, dampers and springs hold the tub steady during the spin. When they wear, the washer bangs and walks. Worn drum bearings make a rumbling or grinding noise that gets louder on the spin cycle.

How a Washer Service Call Usually Goes in Johnson City

Tub bearings and sealA rumble or roar that gets louder as the drum speeds up usually means worn bearings, often after a tub seal has let water reach them. It is one of the bigger repairs, so the technician will compare it with the washer's age and value.
Water level sensingA pressure switch or sensor tells the control how much water is in the tub. A blocked air tube or failed switch can cause overfilling, underfilling or a washer that will not move on to the next step.
Drive belt, coupler and motorBelt-drive washers turn the drum with a belt; others use a motor coupling or a direct-drive motor bolted to the tub. A hum with no movement, a burning smell or a drum that turns by hand too easily points here.

Troubleshooting first? Start with washer not draining or front-load vs top-load washer problems.

Water, Power and Safety First

Closing the washer's water faucets when the machine is not in use takes pressure off the hoses and valves and limits flooding if a hose gives way. Source: GE Appliances - Washer Owner's Manual

Unplug the washer before servicing or cleaning it; pressing the power button does not disconnect it from the electrical supply. Source: GE Appliances - Washer Owner's Manual

More: where washer leaks come from.

What Washer Repair Costs in Johnson City

A washer repair is usually a single part plus labor. Reference ranges from published cost guides:

50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Local Notes for Johnson City

Most washer calls in Johnson City come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Tennessee's Board for Licensing Contractors does not list an appliance repair license among the licenses it issues (general contractor, home improvement, limited licensed electrician and limited licensed plumber). Source: TN Board for Licensing Contractors

In Tennessee, you can check a license with the Tennessee Department of Commerce and Insurance: Verify a License or report a problem to the Tennessee Division of Consumer Affairs (Office of the Attorney General).

Before You Book in Johnson City

  • Is your company licensed where my state requires it, and insured?
  • What guarantee do you give on parts and labor?
  • Can you give a written estimate before ordering parts?

Washing Machine Repair FAQs: Johnson City, TN

Is there anything I can try first?
Make sure the washer is plugged in and the outlet works, the lid or door closes fully, and both water valves are open. If the washer is leaking, unplug it and turn off both supply valves before doing anything else.
Is my washing machine worth fixing?
Compare the repair quote with the price of a comparable new washer and consider its age. Common repairs such as lid switches, door locks, inlet valves, belts and drain pumps are usually worth doing on a washer that is otherwise in good shape. Our repair-cost guide lists published ranges.
Why does my washer shake or walk across the floor?
An unbalanced load is the most common cause, followed by a washer that is not level. If it keeps happening with balanced loads on a level floor, worn shock absorbers, suspension springs or drum bearings are the likely cause, and a technician should check them.

Brand-Specific Washer Repair, Johnson City

Washing Machine Repair Near Johnson City

A clear drain filter, open supply valves and the model number in hand make any washer repair in Johnson City faster and cheaper.

One call to reach a local washing machine repair company
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech