Maytag Washer Repair in Johnson City, TN

Maytag owners in Johnson City usually want two things from a repair company: experience with the brand and quick access to parts. The Johnson City list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.

Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Maytag. If your washer is still under manufacturer coverage, contact Maytag directly.

Who Works on Maytag Washers Near Johnson City

We found 18 appliance repair companies within 30 miles of Johnson City. 4 of them are based in Johnson City itself, and other nearby bases include Bristol (3), Kingsport (3), and Greeneville (3). Distances run up to about 27 miles. No company within 90 miles of Johnson City mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is Sears Appliance Repair, about 0.2 miles away. Across 18 rated companies, the average public rating is 4.4 stars.

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

Closest matches for Johnson City: Mr. Appliance of the Tri-Cities (7.4 miles away, based in Gray, 4.5 stars from 1,004 reviews); Sears Appliance Repair (15.9 miles away, based in Kingsport, 4.5 stars from 174 reviews, lists Saturday hours); Sears Appliance Repair (0.2 miles away, 4.4 stars from 277 reviews, lists Saturday hours); Real-Time Appliance Repairs (3.5 miles away, 4.4 stars from 7 reviews, lists Saturday hours).

Maytag sells top-load agitator, top-load impeller, and front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.

Maytag Washer Lines Technicians Work On

What a Maytag Washer Technician Deals With

Top load HE models use auto-sensing, spinning slowly to estimate the load before adding water in stages, so the water level can look lower than owners expect. Source: Maytag Product Help - Auto Sensing in a Top Load HE Washer

The washer will only run and spin when the lid or door switch senses it is fully closed, and the lid or door locks at the start of a cycle. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide

Maytag Washer Symptoms and First Checks

• Washer not draining or not spinning. Maytag says to confirm the lid or door is fully shut and the load is balanced, then check for oversudsing, a kinked or clogged drain hose, standpipe height and, on some front loaders, a clogged drain pump filter. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
• Off balance, shaking or walking. Maytag says to spread the load evenly, confirm the shipping bolts were removed, and level the washer so all four feet sit firmly on the floor. Source: Maytag Product Help - Washer is Vibrating, Walking or Moving

Reading a Maytag Washer Error Code

Maytag Washer Problems Worth a Service Call

• Washer fills slowly, will not fill, or keeps filling
• An error code on the display
• Burning smell or a motor that hums without turning

What a Washing Machine Technician Checks

Care Maytag Recommends for Its Washers

• If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
• Use only HE detergent in HE washers and measure it per the detergent maker's directions, since too much causes oversudsing, poor rinsing and residue. Source: Maytag Product Help - HE Detergent use in a Washer

Brand guides: Maytag Washer Not Draining or Spinning: Causes.

What Maytag Washer Repairs Cost

A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:

• Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
• Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
• Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
• Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
• After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?

For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Before the Technician Arrives

• The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
• Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
• How old the washer is

Laundry Notes for Johnson City, TN

Most washer calls in Johnson City come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Before You Book in Johnson City

• Is your company licensed where my state requires it, and insured?
• Can you give a written estimate before ordering parts?
• If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?

Maytag Washer Repair FAQs: Johnson City, TN

Other Washer Repair in Johnson City

More Maytag Washer Repair Pages Nearby

Write down any error code your Maytag washer shows and at what point in the cycle it appears. It helps a Johnson City technician bring the right parts.