Serving Bristol, Virginia and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Bristol, VA

See which appliance repair companies around Bristol work on washing machines, how far away they are and how customers rate them.

Talk to a washing machine tech near Bristol
Tell us the brand and the problem and we will connect you with a technician near Bristol.
☎(866) 293-4411
✓12 companies listed for Bristol✓Independent, not a manufacturer✓Public ratings & distances

When a washer quits in Bristol, the first question is whether it is a clog or a setting you can clear yourself or a failed part, and that decides whether you need a technician at all. We pull these listings from public business data, remove closed businesses, parts stores and unrelated trades, and put companies that mention washers at the top.

Who Repairs Washers Near Bristol

Within 30 miles of Bristol there are 15 appliance repair companies in our data. 3 list an address in Bristol, and the rest are spread across Johnson City (4), Kingsport (3), and Abingdon (1). Distances run up to about 27 miles. The closest is Quality Appliance Service, Inc, about 2.4 miles away. Of those, 5 mention washing machine or washer work by name. Rated companies nearby average 4.2 stars across 15 businesses.

Washer & Dryer Repair
Mr. Appliance of the Tri-Cities
404 Roy Martin Rd Ste 50, Gray, TN 37615
21.9 mi from Bristol
★★★★½ 4.5 (1,004 reviews)
Mentions washers
Washer & Dryer Repair
Sears Appliance Repair
1805 E Stone Dr, Kingsport, TN 37660
20.3 mi from Bristol
★★★★½ 4.5 (174 reviews)
Mentions LG, Samsung, WhirlpoolMentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
300 Towne Centre Dr, Abingdon, VA 24210
11.5 mi from Bristol
★★★★½ 4.4 (147 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
2011 N Roan St, Johnson City, TN 37601
22.7 mi from Bristol
★★★★½ 4.4 (277 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Real-Time Appliance Repairs
2694 Boones Creek Rd STE 2, Johnson City, TN 37615
22.4 mi from Bristol
★★★★½ 4.4 (7 reviews)
Mentions washersSaturday hours
Appliance Repair
Reliance Appliance Repair
4451 N Roan St #204, Johnson City, TN 37615
21.3 mi from Bristol
★★★★½ 4.6 (65 reviews)
Appliance Repair
Bean Heating Cooling & Appliance Repair
1657 E Stone Dr Ste B-108, Kingsport, TN 37660
20.5 mi from Bristol
★★★★★ 5.0 (74 reviews)
Appliance Repair
American Appliance Inc
2340 Volunteer Pkwy, Bristol, TN 37620
7.1 mi from Bristol
★★★★½ 4.5 (184 reviews)
Appliance Repair
Brad's fireside repairs
531 TN-91 Ste 2, Elizabethton, TN 37643
17.2 mi from Bristol
★★★★★ 4.8 (32 reviews)
Appliance Repair
Quality Appliance Services & Repair
118 Auburn St, Bristol, TN 37620
2.9 mi from Bristol
★★★½ 3.4 (5 reviews)
Appliance Repair
Quality Appliance Service, Inc
334 8th St, Bristol, TN 37620
2.4 mi from Bristol
★★★½ 3.3 (37 reviews)
Appliance Repair
Milhorn Appliance
223 E Sullivan St, Kingsport, TN 37660
22.5 mi from Bristol
★★★★ 4.0 (90 reviews)

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

By the numbers: technicians near Bristol
Three nearest companies, miles away2.4, 2.9, 7.1
Companies within 30 miles15
Listing Saturday hours5
Mention washer work5
Mention a major washer brand1
Rated 4.5 stars or higher (10+ reviews)6

The leading options for Bristol are Mr. Appliance of the Tri-Cities (21.9 miles away, based in Gray, 4.5 stars from 1,004 reviews); Sears Appliance Repair (20.3 miles away, based in Kingsport, 4.5 stars from 174 reviews, lists Saturday hours); Sears Appliance Repair (11.5 miles away, based in Abingdon, 4.4 stars from 147 reviews, lists Saturday hours); Sears Appliance Repair (22.7 miles away, based in Johnson City, 4.4 stars from 277 reviews, lists Saturday hours).

⚡ Tell us what your washer is doing and we will connect you
☎(866) 293-4411

When to Call for Washer Repair

  • An error code on the display
  • Musty or mildew smell from the drum or door seal
  • Water left in the drum after the cycle
  • Burning smell or a motor that hums without turning

Why Washing Machines Break Down

Belts, couplers and motorsDepending on the design, the motor turns the drum through a belt, a motor coupling or a direct-drive rotor. A worn belt, broken coupler or failed motor leaves the drum still while the washer hums or fills.
Lid switches and door locksA washer will not fill, agitate or spin unless the lid switch or door lock tells the control the lid or door is shut and locked. A worn switch or failed lock is one of the most common parts replaced.
Suspension and bearingsShock absorbers, dampers and springs hold the tub steady during the spin. When they wear, the washer bangs and walks. Worn drum bearings make a rumbling or grinding noise that gets louder on the spin cycle.

What Gets Fixed on a Bristol Washer Call

Suspension and shocksShock absorbers, dampers or suspension rods keep the tub from slamming during the spin. Worn parts cause banging, off-balance shutdowns and a washer that walks across the floor.
Drain pump and filterIf water stays in the drum, the technician checks the drain path first. Most front loaders have a pump filter behind a small panel at the bottom front, and many top loaders hide a pump that can jam on a sock or coin. The pump is then tested for power and blockage.
Controls and error codesElectronic washers report faults with codes. The technician reads the code and runs the brand's test mode where there is one, then checks wiring and the control board before ordering it, since boards are among the costlier parts.

Troubleshooting first? Start with front-load vs top-load washer problems or washer smells like mildew.

If Your Washer Is Leaking

Turn off the water supply valves before disconnecting or reconnecting the washer's fill hoses. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection

Plug the washer into a grounded three-prong outlet on a 15- or 20-amp 120-volt circuit, and never remove the ground prong or use an adapter or extension cord. Source: Whirlpool - Washer Installation Instructions

To prevent siphoning, Whirlpool's instructions limit the drain hose to no more than 8 inches inside a standpipe that is at least 2 inches across and 39 to 96 inches tall, measured from the bottom of the washer. Source: Whirlpool - Washer Installation Instructions

More: where washer leaks come from.

Repair or Replace Your Washer?

Most washing machine repairs come down to one part and an hour or two of labor, which is why many are worth pricing before you shop for a new washer. Published ranges:

For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Laundry Notes for Bristol, VA

Most washer calls in Bristol come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Virginia's Board for Contractors has no appliance repair license classification, but its gas fitting contracting specialty covers installing, repairing or removing gas piping and appliances attached to real property. Source: 18VAC50-22-30, Definitions of specialty services

In Virginia, you can check a license with the DPOR License Lookup or report a problem to the Office of the Attorney General of Virginia, Consumer Protection Section.

Hiring a Washer Repair Company in Bristol

  • How often do you repair your brand washers, and how quickly can you get parts?
  • If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
  • If a part has to be ordered, how soon can you come back to finish?

Washing Machine Repair FAQs: Bristol, VA

Is my washing machine worth fixing?
Compare the repair quote with the price of a comparable new washer and consider its age. Common repairs such as lid switches, door locks, inlet valves, belts and drain pumps are usually worth doing on a washer that is otherwise in good shape. Our repair-cost guide lists published ranges.
Is there anything I can try first?
Make sure the washer is plugged in and the outlet works, the lid or door closes fully, and both water valves are open. If the washer is leaking, unplug it and turn off both supply valves before doing anything else.
Why is there water left in my washer?
The usual causes are a clogged drain pump filter (on most front loaders), a kinked or blocked drain hose, a sock or small item caught in the pump, or a failed drain pump. Clear the filter and check the hose first. If water still sits in the drum, a technician can test the pump.

Washer Repair by Brand in Bristol

More Washing Machine Repair Pages Nearby

Write down the model and serial number from the label (inside the lid or door frame, or on the back of the cabinet) and note any error code. It saves a Bristol technician a trip for parts.

Get connected with a washer technician near Bristol
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech