Serving Kingsport, Tennessee and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Kingsport, TN

See which appliance repair companies around Kingsport work on washing machines, how far away they are and how customers rate them.

Talk to a washing machine tech near Kingsport
Call our helpline to be connected with an independent washing machine technician near you.
☎(866) 293-4411
✓12 companies listed for Kingsport✓Independent, not a manufacturer✓Public ratings & distances

Most washing machine breakdowns trace back to a short list of parts: the drain pump and its filter, the lid switch or door lock, the drive belt or motor coupling, the inlet valve and the suspension. We pull these listings from public business data, remove closed businesses, parts stores and unrelated trades, and put companies that mention washers at the top.

Washing Machine Repair Companies Near Kingsport

We found 19 appliance repair companies within 30 miles of Kingsport. 3 of them are based in Kingsport itself, and the rest are spread across Johnson City (4), Bristol (3), and Greeneville (3). The farthest listed company is about 29 miles out. 5 of them mention washing machine or washer work in their listing or website. The closest is Milhorn Appliance, about 1.9 miles away. The 19 rated companies in range average 4.4 stars.

Washer & Dryer Repair
Mr. Appliance of the Tri-Cities
404 Roy Martin Rd Ste 50, Gray, TN 37615
8.3 mi from Kingsport
★★★★½ 4.5 (1,004 reviews)
Mentions washers
Washer & Dryer Repair
Sears Appliance Repair
1805 E Stone Dr, Kingsport, TN 37660
2.3 mi from Kingsport
★★★★½ 4.5 (174 reviews)
Mentions LG, Samsung, WhirlpoolMentions washersSaturday hours
Washer & Dryer Repair
Real-Time Appliance Repairs
2694 Boones Creek Rd STE 2, Johnson City, TN 37615
12.1 mi from Kingsport
★★★★½ 4.4 (7 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
2011 N Roan St, Johnson City, TN 37601
15.7 mi from Kingsport
★★★★½ 4.4 (277 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
1355 Tusculum Blvd, Greeneville, TN 37745
27.7 mi from Kingsport
★★★★½ 4.5 (119 reviews)
Mentions washersSaturday hours
Appliance Repair
Bean Heating Cooling & Appliance Repair
1657 E Stone Dr Ste B-108, Kingsport, TN 37660
2.3 mi from Kingsport
★★★★★ 5.0 (74 reviews)
Appliance Repair
Reliance Appliance Repair
4451 N Roan St #204, Johnson City, TN 37615
12.2 mi from Kingsport
★★★★½ 4.6 (65 reviews)
Appliance Repair
Milhorn Appliance
223 E Sullivan St, Kingsport, TN 37660
1.9 mi from Kingsport
★★★★ 4.0 (90 reviews)
Appliance Repair
Major Appliance Headquarters
8245 E Andrew Johnson Hwy, Chuckey, TN 37641
22.6 mi from Kingsport
★★★★½ 4.4 (57 reviews)
Appliance Repair
Buckingham Appliance Repair
2709 Buckingham Rd, Greeneville, TN 37745
29.3 mi from Kingsport
★★★★★ 4.8 (40 reviews)
Saturday hours
Appliance Repair
Stewarts Appliances
470 Pleasant Valley Rd, Jonesborough, TN 37659
12.3 mi from Kingsport
★★★★ 4.1 (13 reviews)
Appliance Repair
American Appliance Inc
2340 Volunteer Pkwy, Bristol, TN 37620
17.0 mi from Kingsport
★★★★½ 4.5 (184 reviews)

Companies are shown by relevance and distance from Kingsport. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.

Repair market snapshot: Kingsport, TN
Mention washer work5
Mention a major washer brand1
Rated 4.5 stars or higher (10+ reviews)8
Open on Saturdays (per listing)7
Companies within 30 miles19
Distance to the three closest (mi)1.9, 2.3, 2.3

First up for Kingsport: Mr. Appliance of the Tri-Cities (8.3 miles away, based in Gray, 4.5 stars from 1,004 reviews); Sears Appliance Repair (2.3 miles away, 4.5 stars from 174 reviews, lists Saturday hours); Real-Time Appliance Repairs (12.1 miles away, based in Johnson City, 4.4 stars from 7 reviews, lists Saturday hours); Sears Appliance Repair (15.7 miles away, based in Johnson City, 4.4 stars from 277 reviews, lists Saturday hours).

⚡ Skip the calling around: we will find a washer tech for you
☎(866) 293-4411

Signs Your Washing Machine Needs a Technician

  • Water on the floor under or in front of the washer
  • Water left in the drum after the cycle
  • Burning smell or a motor that hums without turning
  • Washer will not spin, or clothes come out soaking wet

What Usually Goes Wrong

Belts, couplers and motorsDepending on the design, the motor turns the drum through a belt, a motor coupling or a direct-drive rotor. A worn belt, broken coupler or failed motor leaves the drum still while the washer hums or fills.
Lid switches and door locksA washer will not fill, agitate or spin unless the lid switch or door lock tells the control the lid or door is shut and locked. A worn switch or failed lock is one of the most common parts replaced.
Water inlet valveAn electric valve behind the washer lets hot and cold water in. When it sticks or its screens clog, the washer fills slowly, not at all, or keeps filling.

What Gets Fixed on a Kingsport Washer Call

Door boot and leaksOn front loaders the rubber door boot can tear or hold water and debris. A technician follows any leak back to its source, which may be the boot, a hose clamp, the pump, the inlet valve or the tub.
Tub bearings and sealA rumble or roar that gets louder as the drum speeds up usually means worn bearings, often after a tub seal has let water reach them. It is one of the bigger repairs, so the technician will compare it with the washer's age and value.
Water level sensingA pressure switch or sensor tells the control how much water is in the tub. A blocked air tube or failed switch can cause overfilling, underfilling or a washer that will not move on to the next step.

Troubleshooting first? Start with washer smells like mildew or washer not draining.

Water, Power and Safety First

Always install new inlet hoses rather than reusing old ones, check them from time to time, and replace any hose that shows bulges, kinks, cuts, wear or leaks. Source: Whirlpool - Washer Installation Instructions

Unplug the washer before servicing or cleaning it; pressing the power button does not disconnect it from the electrical supply. Source: GE Appliances - Washer Owner's Manual

More: where washer leaks come from.

What Washer Repair Costs in Kingsport

Before replacing a washer in Kingsport, price the repair. Here is what published cost guides report for common jobs:

50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Local Notes for Kingsport

Most washer calls in Kingsport come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Tennessee's Board for Licensing Contractors does not list an appliance repair license among the licenses it issues (general contractor, home improvement, limited licensed electrician and limited licensed plumber). Source: TN Board for Licensing Contractors

In Tennessee, you can check a license with the Tennessee Department of Commerce and Insurance: Verify a License or report a problem to the Tennessee Division of Consumer Affairs (Office of the Attorney General).

Questions to Ask a Kingsport Washer Technician

  • Can you give a written estimate before ordering parts?
  • If the washer is leaking, will you find where the water starts before quoting a part?
  • What is the service call or diagnostic fee, and is it applied to the repair?

Washing Machine Repair FAQs: Kingsport, TN

What stops a washer from spinning?
An unbalanced load, water that will not drain, or a lid switch or door lock that is not engaging stops most spin cycles. If those check out, a technician looks at the drive belt, motor coupling, motor and control.
Why is my washer leaking?
Common sources are a loose or cracked fill hose, the drain hose connection, a torn door boot on a front loader, too much detergent causing suds overflow, or a leaking pump or tub seal. Unplug the washer and shut both valves, then look where the water starts.
How do I get rid of a washer mildew smell?
Residue from detergent and fabric softener collects in the door boot, the dispenser and the drum. Wipe the boot, clean the dispenser, run the washer's cleaning cycle or a hot empty cycle, and leave the door open between loads.
Are you affiliated with any washer brand?
No. We are an independent directory and are not affiliated with any appliance manufacturer. Our helpline connects you with a participating independent technician. If your washer is still under manufacturer coverage, contact the brand first.

Brand-Specific Washer Repair, Kingsport

Washing Machine Repair in Nearby Cities

Before you call a Kingsport technician, check that the washer is plugged in, the hot and cold valves behind it are open and the drain hose is not kinked. If it is a front loader, clean the drain pump filter. If the problem stays, have the model number ready.

One call to reach a local washing machine repair company
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech