Most Maytag washer repairs in South Salt Lake involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. We flag companies whose listing or website mentions Maytag and fill in with nearby appliance repair companies so you always have options.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Maytag. If your washer is still under manufacturer coverage, contact Maytag directly.
Maytag Washer Repair Near South Salt Lake
Within 30 miles of South Salt Lake there are 40 appliance repair companies in our data. 6 list an address in South Salt Lake, and other nearby bases include Salt Lake City (21), West Valley City (5), and Taylorsville (3). The farthest listed company is about 6 miles out. ASU Appliance Sales & Repair is the nearest, roughly 0.3 miles from South Salt Lake. None of the repair companies near South Salt Lake name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Rated companies nearby average 4.7 stars across 27 businesses.
Companies are shown by relevance and distance from South Salt Lake. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention washer work | 10 |
|---|---|
| Three nearest companies, miles away | 0.3, 0.4, 0.5 |
| Repair companies inside 30 miles | 60 |
| With 4.5+ stars and at least 10 reviews | 15 |
| Mention Maytag | 0 |
| Listing Saturday hours | 42 |
First up for South Salt Lake: Mr. Appliance of Salt Lake City (0.9 miles away, based in Salt Lake City, 4.7 stars from 1,513 reviews, lists Saturday hours); Appliance Service By Paul (4.4 miles away, based in Salt Lake City, 4.8 stars from 2,590 reviews, lists Saturday hours); Quality Appliance Service (3.3 miles away, based in West Valley City, 4.6 stars from 1,441 reviews); Titan Appliance Repair (0.5 miles away, 4.8 stars from 21 reviews, lists Saturday hours).
Maytag sells top-load agitator, top-load impeller, and front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Maytag Washer Lines and Features
How Maytag Washers Are Built
Maytag top loaders move clothes with either an agitator or an impeller, and the drive shifts between agitation and full spin, which can make a normal clunking sound. Source: Maytag - How to repair a washing machine (top load)
A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information
What Maytag Says to Check First
- Washer odor. Maytag links odor to skipped cleanings, wet loads left sitting and too much detergent or softener, and recommends regular washer cleaning and moving loads out promptly. Source: Maytag - How to repair a washing machine (top load)
- Lid or door won't lock. For lid or door lock codes, Maytag says to check for clothing or objects blocking the latch area and then reset the washer by unplugging it for five minutes. Source: Maytag Product Help - F5E2 - Error Code (top load)
Maytag Washer Error Codes
| Code | What it means |
|---|---|
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
Maytag Washer Problems Worth a Service Call
- Washer will not start or the lid or door stays locked
- Water on the floor under or in front of the washer
- Grinding or roaring noise that rises with spin speed
What a Washing Machine Technician Checks
Care Maytag Recommends for Its Washers
- On front loaders, wipe and dry the door seal folds, remove wet loads promptly and leave the door slightly open after use to limit mildew and odor. Source: Maytag Product Help - Cleaning a Front Load Washer Door Seal
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Maytag Washer Repair Cost Ranges
Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- How old the washer is
- Where the washer drains (standpipe or laundry sink)
Laundry Notes for South Salt Lake, UT
Most washer calls in South Salt Lake come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Before You Book in South Salt Lake
- Will you check the drain pump filter and drain hose before replacing the pump?
- If a part has to be ordered, how soon can you come back to finish?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
Maytag Washer Repair FAQs: South Salt Lake, UT
Why won't my washer spin?
Where is the water under my washer coming from?
Do you work for Maytag?
Is my Maytag washer worth repairing?
Related Repair Pages for South Salt Lake
More Maytag Washer Repair Pages Nearby
Write down any error code your Maytag washer shows and at what point in the cycle it appears. It helps a South Salt Lake technician bring the right parts.