If your Maytag washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. We flag companies whose listing or website mentions Maytag and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Maytag Washers Near Millcreek
We found 40 appliance repair companies within 30 miles of Millcreek. 1 list an address in Millcreek, and other nearby bases include Salt Lake City (19), South Salt Lake (6), and Midvale (4). Distances run up to about 7 miles. The closest is Professional Home Appliance Repair Solutions, about 1.0 miles away. None of the repair companies near Millcreek name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Across 27 rated companies, the average public rating is 4.7 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Distance to the three closest (mi) | 1.0, 1.6, 1.8 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 14 |
| Mention washer work | 12 |
| Listing Saturday hours | 43 |
| Mention Maytag | 0 |
| Companies within 30 miles | 60 |
Closest matches for Millcreek: Mr. Appliance of Salt Lake City (3.4 miles away, based in Salt Lake City, 4.7 stars from 1,513 reviews, lists Saturday hours); Appliance Service By Paul (5.0 miles away, based in Salt Lake City, 4.8 stars from 2,590 reviews, lists Saturday hours); PowerClean Appliance Repair (5.1 miles away, based in Midvale, 4.9 stars from 949 reviews, lists Saturday hours); Trusty Appliance Repair (6.3 miles away, based in Sandy, 4.9 stars from 313 reviews, lists Saturday hours).
Maytag Washer Lines Technicians Work On
What Makes Maytag Washer Repairs Different
A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information
Maytag top loaders move clothes with either an agitator or an impeller, and the drive shifts between agitation and full spin, which can make a normal clunking sound. Source: Maytag - How to repair a washing machine (top load)
Maytag Washer Symptoms and First Checks
- Washer not draining or not spinning. Maytag says to confirm the lid or door is fully shut and the load is balanced, then check for oversudsing, a kinked or clogged drain hose, standpipe height and, on some front loaders, a clogged drain pump filter. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
- Off balance, shaking or walking. Maytag says to spread the load evenly, confirm the shipping bolts were removed, and level the washer so all four feet sit firmly on the floor. Source: Maytag Product Help - Washer is Vibrating, Walking or Moving
Reading a Maytag Washer Error Code
| Code | What it means |
|---|---|
| F5E2 | Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code |
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
When to Call for Maytag Washer Repair
- Washer fills slowly, will not fill, or keeps filling
- Loud banging, shaking or walking during the spin
- An error code on the display
How a Washer Service Call Usually Goes in Millcreek
Keeping a Maytag Washer Running
- Run the Clean Washer cycle with a washer cleaning tablet about once a month, or when the clean washer light comes on or odor appears; without that cycle, use the hottest, highest water setting. Source: Maytag Product Help - Cleaning Washers with affresh
- On front loaders, wipe and dry the door seal folds, remove wet loads promptly and leave the door slightly open after use to limit mildew and odor. Source: Maytag Product Help - Cleaning a Front Load Washer Door Seal
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
What Maytag Washer Repairs Cost
Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Where the washer drains (standpipe or laundry sink)
- How old the washer is
Laundry Notes for Millcreek, UT
Most washer calls in Millcreek come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Questions to Ask a Millcreek Washer Technician
- What is the service call or diagnostic fee, and is it applied to the repair?
- What guarantee do you give on parts and labor?
- Is your company licensed where my state requires it, and insured?
Maytag Washer Repair FAQs: Millcreek, UT
What should I do about a Maytag error code?
Where is the water under my washer coming from?
Is this Maytag customer service?
What stops a washer from spinning?
Related Repair Pages for Millcreek
More Maytag Washer Repair Pages Nearby
Before you call, find the model and serial number on your Maytag washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.