Maytag owners in Murray usually want two things from a repair company: experience with the brand and quick access to parts. Below are independent repair companies serving Murray, with those that mention Maytag first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Maytag Washers Near Murray
Our data shows 40 appliance repair companies inside a 30-mile radius of Murray. 2 list an address in Murray, and other nearby bases include Sandy (8), Midvale (6), and West Jordan (6). The closest is Local Appliance Repair Technicians, about 0.7 miles away. None of the repair companies near Murray name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The 23 rated companies in range average 4.7 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Mention Maytag | 0 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 13 |
| Three nearest companies, miles away | 0.7, 0.9, 1.7 |
| Open on Saturdays (per listing) | 43 |
| Appliance repair companies in range (30 mi) | 60 |
| Name washers or washing machines in their listing | 12 |
The leading options for Murray are Mr. Appliance of Salt Lake City (3.0 miles away, based in Salt Lake City, 4.7 stars from 1,513 reviews, lists Saturday hours); Appliance Service By Paul (0.9 miles away, based in Salt Lake City, 4.8 stars from 2,590 reviews, lists Saturday hours); PowerClean Appliance Repair (2.7 miles away, based in Midvale, 4.9 stars from 949 reviews, lists Saturday hours); Trusty Appliance Repair (3.6 miles away, based in Sandy, 4.9 stars from 313 reviews, lists Saturday hours).
Maytag Washer Lines Technicians Work On
What Makes Maytag Washer Repairs Different
The washer will only run and spin when the lid or door switch senses it is fully closed, and the lid or door locks at the start of a cycle. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information
What Maytag Says to Check First
- Lid or door won't lock. For lid or door lock codes, Maytag says to check for clothing or objects blocking the latch area and then reset the washer by unplugging it for five minutes. Source: Maytag Product Help - F5E2 - Error Code (top load)
- Washer not draining or not spinning. Maytag says to confirm the lid or door is fully shut and the load is balanced, then check for oversudsing, a kinked or clogged drain hose, standpipe height and, on some front loaders, a clogged drain pump filter. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
Reading a Maytag Washer Error Code
| Code | What it means |
|---|---|
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
Signs Your Maytag Washer Needs a Technician
- Water left in the drum after the cycle
- Burning smell or a motor that hums without turning
- Grinding or roaring noise that rises with spin speed
What Gets Fixed on a Murray Washer Call
Owner Care for Maytag Washers
- Run the Clean Washer cycle with a washer cleaning tablet about once a month, or when the clean washer light comes on or odor appears; without that cycle, use the hottest, highest water setting. Source: Maytag Product Help - Cleaning Washers with affresh
- On front loaders, wipe and dry the door seal folds, remove wet loads promptly and leave the door slightly open after use to limit mildew and odor. Source: Maytag Product Help - Cleaning a Front Load Washer Door Seal
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Budgeting for a Maytag Washer Repair
Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- How old the washer is
- Where the washer drains (standpipe or laundry sink)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Around Murray
Most washer calls in Murray come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
How to Choose a Washing Machine Technician Near Murray
- What guarantee do you give on parts and labor?
- What is the service call or diagnostic fee, and is it applied to the repair?
- Do you work on front-load and top-load washers, or only one type?
Maytag Washer Repair FAQs: Murray, UT
What stops a washer from spinning?
Is this Maytag customer service?
Where is the water under my washer coming from?
How do I get rid of a washer mildew smell?
Related Repair Pages for Murray
More Maytag Washer Repair Pages Nearby
Before you call, find the model and serial number on your Maytag washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.