Whirlpool owners in Brigham City usually want two things from a repair company: experience with the brand and quick access to parts. Below are independent repair companies serving Brigham City, with those that mention Whirlpool first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Whirlpool, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Whirlpool Washers Near Brigham City
Within 30 miles of Brigham City there are 19 appliance repair companies in our data. 1 of them are based in Brigham City itself, and other nearby bases include Ogden (3), Smithfield (3), and Clearfield (3). The farthest listed company is about 29 miles out. Nearest on the list: Murphy's Appliance Sales & Services, around 1.6 miles out. None of the repair companies near Brigham City name Whirlpool in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The 15 rated companies in range average 4.5 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| With 4.5+ stars and at least 10 reviews | 10 |
|---|---|
| Mention Whirlpool | 0 |
| Name washers or washing machines in their listing | 1 |
| Distance to the three closest (mi) | 1.6, 13.2, 14.1 |
| Listing Saturday hours | 11 |
| Companies within 30 miles | 19 |
At the top of the Brigham City list: Cache Appliance (19.8 miles away, based in Logan, 5.0 stars from 560 reviews); R.A.C.E.R. Service Appliance Repair (16.1 miles away, based in Nibley, 4.7 stars from 12 reviews); Ben Lomond Appliance Repair llc (13.2 miles away, based in North Ogden, 5.0 stars from 155 reviews, lists Saturday hours); Darrell's Appliance Service And Sales Inc (21.6 miles away, based in Smithfield, 4.7 stars from 639 reviews, lists Saturday hours).
Whirlpool sells top-load agitator, top-load impeller, front-load, all-in-one combo, and commercial washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Whirlpool Washer Lines and Features
How Whirlpool Washers Are Built
The drain hose must run to a standpipe between 30 and 96 inches tall, since a higher drain can let water flow back into the washer. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
Whirlpool Washer Symptoms and First Checks
- Washer smells. Run the Clean Washer cycle monthly, use only HE detergent, take clothes out promptly, and leave the door open between loads. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
- Washer won't start. Check that the washer is plugged in and the breaker has not tripped, turn off the control lock if it is on, and reset the washer by cutting power for at least a minute. Source: Whirlpool - How to reset a washing machine
What Whirlpool Washer Codes Mean
| Code | What it means |
|---|---|
| F8 E2 | Dispenser system problem on select models, often a clogged detergent drawer or cartridge. Source: Whirlpool - Error Codes in Front Load Washers |
| rL / F34 | Items were left in the drum when the Clean Washer cycle was started. Source: Whirlpool - Error Codes in Front Load Washers |
| F7 E1 | Motor speed sensing problem; check that shipping bolts are removed and the washer is not overloaded. Source: Whirlpool - Error Codes in Front Load Washers |
When to Call for Whirlpool Washer Repair
- Loud banging, shaking or walking during the spin
- Washer will not start or the lid or door stays locked
- Water left in the drum after the cycle
How a Washer Service Call Usually Goes in Brigham City
Keeping a Whirlpool Washer Running
- Clean the front load drain pump filter every few months or whenever lint builds up, on models that have one. Source: Whirlpool - Cleaning the Pump Filter - Front Load Washer
- Check and brush clean the small mesh screens where the fill hoses connect at the back of the washer if filling slows. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
Budgeting for a Whirlpool Washer Repair
Most Whirlpool washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Whirlpool Washer Call
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Any error code shown on the display
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
What Brigham City Owners Should Know
Most washer calls in Brigham City come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Before You Book in Brigham City
- What guarantee do you give on parts and labor?
- What is the service call or diagnostic fee, and is it applied to the repair?
- Do you work on front-load and top-load washers, or only one type?
Whirlpool Washer Repair FAQs: Brigham City, UT
Is this Whirlpool customer service?
What stops a washer from spinning?
How do I get rid of a washer mildew smell?
Other Washer Repair in Brigham City
Whirlpool Washer Repair Near Brigham City
Write down any error code your Whirlpool washer shows and at what point in the cycle it appears. It helps a Brigham City technician bring the right parts.