A Whirlpool washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. We flag companies whose listing or website mentions Whirlpool and fill in with nearby appliance repair companies so you always have options.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Whirlpool. If your washer is still under manufacturer coverage, contact Whirlpool directly.
Whirlpool Washer Repair Near Plain City
Our data shows 21 appliance repair companies inside a 30-mile radius of Plain City. Other nearby bases include Ogden (3), Clearfield (3), and North Ogden (2). The farthest listed company is about 29 miles out. None of the repair companies near Plain City name Whirlpool in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Nearest on the list: Ben Lomond Appliance Repair llc, around 5.9 miles out. Across 14 rated companies, the average public rating is 4.3 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Open on Saturdays (per listing) | 12 |
|---|---|
| Name washers or washing machines in their listing | 1 |
| Distance to the three closest (mi) | 5.9, 6.0, 8.5 |
| Appliance repair companies in range (30 mi) | 21 |
| Mention Whirlpool | 0 |
| Rated 4.5 stars or higher (10+ reviews) | 8 |
First up for Plain City: Ben Lomond Appliance Repair llc (5.9 miles away, based in North Ogden, 5.0 stars from 155 reviews, lists Saturday hours); iFiX, LLC (10.2 miles away, based in Riverdale, 4.9 stars from 436 reviews); R.A.C.E.R. Service Appliance Repair (28.6 miles away, based in Nibley, 4.7 stars from 12 reviews); Dick Kearsley Service Center (14.3 miles away, based in Clearfield, 4.6 stars from 609 reviews, lists Saturday hours).
Whirlpool Washer Lines Technicians Work On
How Whirlpool Washers Are Built
Both top and front load models will only run their spin when the lid or door switch registers the lid or door as fully closed and latched. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
What Whirlpool Says to Check First
- Washer won't start. Check that the washer is plugged in and the breaker has not tripped, turn off the control lock if it is on, and reset the washer by cutting power for at least a minute. Source: Whirlpool - How to reset a washing machine
- Washer shaking or walking. Remove the shipping bolts, adjust the feet until all four sit firmly on the floor, and spread heavy and light items evenly in the drum. Source: Whirlpool - Washer is Vibrating, Walking or Moving
Reading a Whirlpool Washer Error Code
| Code | What it means |
|---|---|
| rL / F34 | Items were left in the drum when the Clean Washer cycle was started. Source: Whirlpool - Error Codes in Front Load Washers |
| LOC / LC | Control lock is turned on; touch or hold the Control Lock button to release it. Source: Whirlpool - Error Codes in Front Load Washers |
| Int | The cycle was paused or canceled, and the washer may drain and spin for a while before it stops. Source: Whirlpool - Error Codes in Front Load Washers |
Whirlpool Washer Problems Worth a Service Call
- An error code on the display
- Musty or mildew smell from the drum or door seal
- Loud banging, shaking or walking during the spin
What a Washing Machine Technician Checks
Owner Care for Whirlpool Washers
- Run the Clean Washer cycle once a month with affresh cleaner or regular liquid chlorine bleach to keep the washer fresh. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
- Replace the water fill hoses about every five years. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
What Whirlpool Washer Repairs Cost
Most Whirlpool washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Any error code shown on the display
- How old the washer is
Around Plain City
Most washer calls in Plain City come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Before You Book in Plain City
- What is the service call or diagnostic fee, and is it applied to the repair?
- If the washer is leaking, will you find where the water starts before quoting a part?
- If a part has to be ordered, how soon can you come back to finish?
Whirlpool Washer Repair FAQs: Plain City, UT
Why does my front-load washer smell?
What stops a washer from spinning?
Is this Whirlpool customer service?
Which Plain City technicians work on Whirlpool?
Related Repair Pages for Plain City
Whirlpool Washer Repair in Nearby Cities
Before you call, find the model and serial number on your Whirlpool washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.