When a washer quits in Brigham City, the first question is whether it is a clog or a setting you can clear yourself or a failed part, and that decides whether you need a technician at all. The Brigham City list below starts with companies that show washer work in their listings, followed by other appliance repair companies nearby.
Local Washing Machine Repair in Brigham City, UT
Within 30 miles of Brigham City there are 19 appliance repair companies in our data. 1 list an address in Brigham City, and other nearby bases include Ogden (3), Smithfield (3), and Clearfield (3). The farthest listed company is about 29 miles out. 1 lists washing machine or washer work specifically. The closest is Murphy's Appliance Sales & Services, about 1.6 miles away. The 15 rated companies in range average 4.5 stars.
Companies are shown by relevance and distance from Brigham City. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Listing Saturday hours | 11 |
|---|---|
| Repair companies inside 30 miles | 19 |
| Name washers or washing machines in their listing | 1 |
| Mention a major washer brand | 0 |
| Three nearest companies, miles away | 1.6, 13.2, 14.1 |
| With 4.5+ stars and at least 10 reviews | 10 |
The leading options for Brigham City are R.A.C.E.R. Service Appliance Repair (16.1 miles away, based in Nibley, 4.7 stars from 12 reviews); Cache Appliance (19.8 miles away, based in Logan, 5.0 stars from 560 reviews); iFiX, LLC (23.2 miles away, based in Riverdale, 4.9 stars from 436 reviews); Dick Kearsley Service Center (27.4 miles away, based in Clearfield, 4.6 stars from 609 reviews, lists Saturday hours).
Signs Your Washing Machine Needs a Technician
- Burning smell or a motor that hums without turning
- Washer will not spin, or clothes come out soaking wet
- An error code on the display
- Loud banging, shaking or walking during the spin
What Usually Goes Wrong
Inside a Washer Repair Visit
Troubleshooting first? Start with washer not filling with water or washer not spinning.
Water, Power and Safety First
Whirlpool recommends replacing washer fill hoses every five years to lower the risk of a hose failing and leaking. Source: Whirlpool - Washing Machine Fill Hoses
Manufacturers require the washer to be electrically grounded and warn against using an extension cord or modifying the plug. Source: Maytag - High-Efficiency Washer Installation Instructions
To prevent siphoning, Whirlpool's instructions limit the drain hose to no more than 8 inches inside a standpipe that is at least 2 inches across and 39 to 96 inches tall, measured from the bottom of the washer. Source: Whirlpool - Washer Installation Instructions
More: where washer leaks come from.
What Washer Repair Costs in Brigham City
Most washing machine repairs come down to one part and an hour or two of labor, which is why many are worth pricing before you shop for a new washer. Published ranges:
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Local Notes for Brigham City
Most washer calls in Brigham City come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
How to Choose a Washing Machine Technician Near Brigham City
- Can you give a written estimate before ordering parts?
- What guarantee do you give on parts and labor?
- How often do you repair your brand washers, and how quickly can you get parts?
Washing Machine Repair FAQs: Brigham City, UT
Do you cover Brigham City and nearby towns?
Is the helpline a manufacturer?
Is my washing machine worth fixing?
Why does my front-load washer smell?
Find Your Washer Brand in Brigham City
Washing Machine Repair in Nearby Cities
Write down the model and serial number from the label (inside the lid or door frame, or on the back of the cabinet) and note any error code. It saves a Brigham City technician a trip for parts.