If your Whirlpool washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. Below are independent repair companies serving Clinton, with those that mention Whirlpool first, then the nearest appliance repair companies.
Washing Machine Repair Near Me is independent and not affiliated with Whirlpool. Listed companies are independent technicians who repair Whirlpool washers and other brands.
Whirlpool Washer Repair Near Clinton
Within 30 miles of Clinton there are 36 appliance repair companies in our data. 1 of them are based in Clinton itself, and the rest are spread across Knoxville (20), Lenoir City (3), and Maryville (3). The farthest listed company is about 28 miles out. The closest is G E Appliance Services, about 0.4 miles away. None of the companies within 30 miles mention Whirlpool by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. Rated companies nearby average 4.4 stars across 34 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Three nearest companies, miles away | 0.4, 7.2, 9.6 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 18 |
| Open on Saturdays (per listing) | 17 |
| Name washers or washing machines in their listing | 11 |
| Mention Whirlpool | 0 |
| Companies within 30 miles | 36 |
At the top of the Clinton list: Whirlpool Corporation (77.4 miles away, based in Cleveland, 2.7 stars from 12 reviews); Mr. Appliance of Knoxville (12.5 miles away, based in Knoxville, 4.6 stars from 1,973 reviews); S&S Service LLC (17.8 miles away, based in Lenoir City, 4.9 stars from 95 reviews, lists Saturday hours); Eleet Appliance Repair (18.3 miles away, based in Lenoir City, 4.8 stars from 45 reviews, lists Saturday hours).
Whirlpool sells top-load agitator, top-load impeller, front-load, all-in-one combo, and commercial washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your Whirlpool Washer
How Whirlpool Washers Are Built
Both top and front load models will only run their spin when the lid or door switch registers the lid or door as fully closed and latched. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
What Whirlpool Says to Check First
- Washer not draining. Confirm the lid or door is fully latched, then look for kinks or clogs in the drain hose and make sure the standpipe height is within range. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
- Washer smells. Run the Clean Washer cycle monthly, use only HE detergent, take clothes out promptly, and leave the door open between loads. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
Whirlpool Washer Error Codes
| Code | What it means |
|---|---|
| F8 E2 | Dispenser system problem on select models, often a clogged detergent drawer or cartridge. Source: Whirlpool - Error Codes in Front Load Washers |
| F7 E1 | Motor speed sensing problem; check that shipping bolts are removed and the washer is not overloaded. Source: Whirlpool - Error Codes in Front Load Washers |
| LOC / LC | Control lock is turned on; touch or hold the Control Lock button to release it. Source: Whirlpool - Error Codes in Front Load Washers |
Whirlpool Washer Problems Worth a Service Call
- Washer will not spin, or clothes come out soaking wet
- Water left in the drum after the cycle
- Burning smell or a motor that hums without turning
How a Washer Service Call Usually Goes in Clinton
Keeping a Whirlpool Washer Running
- Clean the front load drain pump filter every few months or whenever lint builds up, on models that have one. Source: Whirlpool - Cleaning the Pump Filter - Front Load Washer
- Replace the water fill hoses about every five years. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
Whirlpool Washer Repair Cost Ranges
Most Whirlpool washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Any error code shown on the display
- How old the washer is
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Around Clinton
Most washer calls in Clinton come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Tennessee's Board for Licensing Contractors does not list an appliance repair license among the licenses it issues (general contractor, home improvement, limited licensed electrician and limited licensed plumber). Source: TN Board for Licensing Contractors
In Tennessee, you can check a license with the Tennessee Department of Commerce and Insurance: Verify a License or report a problem to the Tennessee Division of Consumer Affairs (Office of the Attorney General).
How to Choose a Washing Machine Technician Near Clinton
- What is the service call or diagnostic fee, and is it applied to the repair?
- If the washer is leaking, will you find where the water starts before quoting a part?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
Whirlpool Washer Repair FAQs: Clinton, TN
Should I repair or replace my Whirlpool washer?
What should I do about a Whirlpool error code?
Why is my washer leaking?
More Washing Machine Repair in Clinton, TN
Whirlpool Washer Repair Near Clinton
Before you call, find the model and serial number on your Whirlpool washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.