Most Whirlpool washer repairs in Memphis involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Memphis list starts with companies that name Whirlpool, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Whirlpool, and the technicians listed are independent repair companies, not the manufacturer.
Whirlpool Washer Repair Near Memphis
Within 30 miles of Memphis there are 31 appliance repair companies in our data. 10 of them are based in Memphis itself, and other nearby bases include Bartlett (4), Collierville (3), and Millington (2). None of the repair companies near Memphis name Whirlpool in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The closest is Professional Repair Service, about 1.5 miles away. Across 29 rated companies, the average public rating is 3.9 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Distance to the three closest (mi) | 1.5, 4.4, 4.6 |
|---|---|
| Companies within 30 miles | 31 |
| Mention washer work | 8 |
| Mention Whirlpool | 0 |
| Listing Saturday hours | 15 |
| Rated 4.5 stars or higher (10+ reviews) | 11 |
At the top of the Memphis list: Sears Appliance Repair (17.1 miles away, based in Collierville, 4.6 stars from 466 reviews, lists Saturday hours); Mr. Appliance of Memphis (13.5 miles away, based in Cordova, 4.7 stars from 1,977 reviews); Sears Appliance Repair (12.4 miles away, 4.6 stars from 941 reviews, lists Saturday hours); Professional Repair Service (1.5 miles away, 3.7 stars from 14 reviews, lists Saturday hours).
Whirlpool sells top-load agitator, top-load impeller, front-load, all-in-one combo, and commercial washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Whirlpool Washer Lines and Features
What Makes Whirlpool Washer Repairs Different
Both top and front load models will only run their spin when the lid or door switch registers the lid or door as fully closed and latched. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
Common Whirlpool Washer Problems
- Washer not draining. Confirm the lid or door is fully latched, then look for kinks or clogs in the drain hose and make sure the standpipe height is within range. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
- Washer smells. Run the Clean Washer cycle monthly, use only HE detergent, take clothes out promptly, and leave the door open between loads. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
What Whirlpool Washer Codes Mean
| Code | What it means |
|---|---|
| dEt | Detergent cartridge is not detected on models with a bulk dispenser. Source: Whirlpool - Error Codes in Front Load Washers |
| F7 E1 | Motor speed sensing problem; check that shipping bolts are removed and the washer is not overloaded. Source: Whirlpool - Error Codes in Front Load Washers |
| rL / F34 | Items were left in the drum when the Clean Washer cycle was started. Source: Whirlpool - Error Codes in Front Load Washers |
Signs Your Whirlpool Washer Needs a Technician
- Water left in the drum after the cycle
- Water on the floor under or in front of the washer
- Washer will not start or the lid or door stays locked
What a Washing Machine Technician Checks
Keeping a Whirlpool Washer Running
- Leave the front load door ajar between loads and remove wet clothes promptly so moisture can dry out. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
- Clean the front load drain pump filter every few months or whenever lint builds up, on models that have one. Source: Whirlpool - Cleaning the Pump Filter - Front Load Washer
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
Budgeting for a Whirlpool Washer Repair
Price the repair before replacing a Whirlpool washer. Published ranges for common jobs:
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Any error code shown on the display
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Local Notes for Memphis
Most washer calls in Memphis come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Tennessee's Board for Licensing Contractors does not list an appliance repair license among the licenses it issues (general contractor, home improvement, limited licensed electrician and limited licensed plumber). Source: TN Board for Licensing Contractors
In Tennessee, you can check a license with the Tennessee Department of Commerce and Insurance: Verify a License or report a problem to the Tennessee Division of Consumer Affairs (Office of the Attorney General).
Questions to Ask a Memphis Washer Technician
- Is your company licensed where my state requires it, and insured?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- If the washer is leaking, will you find where the water starts before quoting a part?
Whirlpool Washer Repair FAQs: Memphis, TN
Is my Whirlpool washer worth repairing?
Why is my washer leaking?
Which Memphis technicians work on Whirlpool?
Other Washer Repair in Memphis
Whirlpool Washer Repair Near Memphis
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Whirlpool repair.