Serving Clinton, Tennessee and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Clinton, TN

Water left in the drum, a washer that will not spin or a puddle on the laundry room floor? Here are the companies that serve Clinton.

Need washer repair in Clinton?
One call connects you with a local technician who repairs front-load and top-load washers.
☎(866) 293-4411
✓12 companies listed for Clinton✓Independent, not a manufacturer✓Public ratings & distances

When a washer quits in Clinton, the first question is whether it is a clog or a setting you can clear yourself or a failed part, and that decides whether you need a technician at all. This page lists independent appliance repair companies serving Clinton and the Anderson County area, with companies that mention washer work shown first.

Local Washing Machine Repair in Clinton, TN

Within 30 miles of Clinton there are 36 appliance repair companies in our data. 1 of them are based in Clinton itself, and other nearby bases include Knoxville (20), Lenoir City (3), and Maryville (3). Nearest on the list: G E Appliance Services, around 0.4 miles out. 11 list washing machine or washer work specifically. Rated companies nearby average 4.4 stars across 34 businesses.

Washer & Dryer Repair
Mr. Appliance of Knoxville
200 Prosperity Dr, Knoxville, TN 37923
12.5 mi from Clinton
★★★★½ 4.6 (1,973 reviews)
Mentions washers
Washer & Dryer Repair
ProTech Appliance Repair, Inc.
3209 Pershing St, Knoxville, TN 37917
12.7 mi from Clinton
★★★★★ 4.9 (270 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
2931 Knoxville Center Dr, Knoxville, TN 37924
14.9 mi from Clinton
★★★★½ 4.5 (94 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Eleet Appliance Repair
124 Upper Jones Rd, Lenoir City, TN 37771
18.3 mi from Clinton
★★★★★ 4.8 (45 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Pattersons Home Appliances
10640 Kingston Pike, Knoxville, TN 37922
14.0 mi from Clinton
★★★★ 4.2 (202 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
7600 Kingston Pike H, Knoxville, TN 37919
12.9 mi from Clinton
★★★★ 4.2 (260 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
198 Foothills Mall Dr, Maryville, TN 37801
25.5 mi from Clinton
★★★★½ 4.4 (106 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
S&S Service LLC
1001 Alexis Ln, Lenoir City, TN 37772
17.8 mi from Clinton
★★★★★ 4.9 (95 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
6909 Maynardville Pike, Knoxville, TN 37918
11.2 mi from Clinton
★★★★ 4.1 (143 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
236 S Roane St, Harriman, TN 37748
26.8 mi from Clinton
★★★★½ 4.3 (113 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Pattersons Home Appliances
1807 Roane State Hwy, Harriman, TN 37748
27.3 mi from Clinton
★★★★½ 4.5 (121 reviews)
Mentions washersSaturday hours
Appliance Repair
Appliance Repair Service,Inc
2303 W Emory Rd #3708, Powell, TN 37849
7.2 mi from Clinton
★★★★★ 4.9 (494 reviews)

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

Repair market snapshot: Clinton, TN
Listing Saturday hours17
Rated 4.5 stars or higher (10+ reviews)18
Distance to the three closest (mi)0.4, 7.2, 9.6
Mention washer work11
Mention a major washer brand0
Appliance repair companies in range (30 mi)36

At the top of the Clinton list: Mr. Appliance of Knoxville (12.5 miles away, based in Knoxville, 4.6 stars from 1,973 reviews); ProTech Appliance Repair, Inc. (12.7 miles away, based in Knoxville, 4.9 stars from 270 reviews, lists Saturday hours); Sears Appliance Repair (14.9 miles away, based in Knoxville, 4.5 stars from 94 reviews, lists Saturday hours); Eleet Appliance Repair (18.3 miles away, based in Lenoir City, 4.8 stars from 45 reviews, lists Saturday hours).

⚡ Get connected with a washer technician near Clinton
☎(866) 293-4411

When to Call for Washer Repair

  • Loud banging, shaking or walking during the spin
  • Water on the floor under or in front of the washer
  • An error code on the display
  • Burning smell or a motor that hums without turning

The Usual Washer Culprits in Clinton

Suspension and bearingsShock absorbers, dampers and springs hold the tub steady during the spin. When they wear, the washer bangs and walks. Worn drum bearings make a rumbling or grinding noise that gets louder on the spin cycle.
Drain pumps and filtersSocks, coins, hair ties and lint end up in the drain path. On most front loaders a small filter behind a panel at the bottom front catches them, and a clogged filter or jammed pump is behind many not-draining calls.
Hoses, seals and the door bootFill hoses age and crack, drain hose clamps loosen, and the rubber door boot on a front loader can tear or trap water. Leaks usually start small under the washer before they show on the floor.

How a Washer Service Call Usually Goes in Clinton

Water inlet valve and hosesAn electric valve meters hot and cold water in. A technician checks its inlet screens for sediment and tests its coils when the washer fills slowly, will not fill, or will not stop filling.
Lid switch or door lockTop loaders use a lid switch or lid lock and front loaders use a door lock. If the control cannot confirm the lid or door is shut and locked, the washer will not fill, agitate or spin, and a technician tests the switch and its wiring.
Drain pump and filterIf water stays in the drum, the technician checks the drain path first. Most front loaders have a pump filter behind a small panel at the bottom front, and many top loaders hide a pump that can jam on a sock or coin. The pump is then tested for power and blockage.

Troubleshooting first? Start with washer not draining or front-load vs top-load washer problems.

Before Anyone Touches the Washer

Always install new inlet hoses rather than reusing old ones, check them from time to time, and replace any hose that shows bulges, kinks, cuts, wear or leaks. Source: Whirlpool - Washer Installation Instructions

Plug the washer into a grounded three-prong outlet on a 15- or 20-amp 120-volt circuit, and never remove the ground prong or use an adapter or extension cord. Source: Whirlpool - Washer Installation Instructions

More: where washer leaks come from.

What Washer Repair Costs in Clinton

A washer repair is usually a single part plus labor. Reference ranges from published cost guides:

50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Local Notes for Clinton

Most washer calls in Clinton come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Tennessee's Board for Licensing Contractors does not list an appliance repair license among the licenses it issues (general contractor, home improvement, limited licensed electrician and limited licensed plumber). Source: TN Board for Licensing Contractors

In Tennessee, you can check a license with the Tennessee Department of Commerce and Insurance: Verify a License or report a problem to the Tennessee Division of Consumer Affairs (Office of the Attorney General).

Before You Book in Clinton

  • Do you work on front-load and top-load washers, or only one type?
  • If the washer is leaking, will you find where the water starts before quoting a part?
  • If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?

Washing Machine Repair FAQs: Clinton, TN

Where is the water under my washer coming from?
Common sources are a loose or cracked fill hose, the drain hose connection, a torn door boot on a front loader, too much detergent causing suds overflow, or a leaking pump or tub seal. Unplug the washer and shut both valves, then look where the water starts.
Are you affiliated with any washer brand?
No. We are an independent directory and are not affiliated with any appliance manufacturer. Our helpline connects you with a participating independent technician. If your washer is still under manufacturer coverage, contact the brand first.
Should I repair or replace my washer?
Compare the repair quote with the price of a comparable new washer and consider its age. Common repairs such as lid switches, door locks, inlet valves, belts and drain pumps are usually worth doing on a washer that is otherwise in good shape. Our repair-cost guide lists published ranges.
What should I check before calling?
Make sure the washer is plugged in and the outlet works, the lid or door closes fully, and both water valves are open. If the washer is leaking, unplug it and turn off both supply valves before doing anything else.

Find Your Washer Brand in Clinton

Washing Machine Repair Near Clinton

Write down the model and serial number from the label (inside the lid or door frame, or on the back of the cabinet) and note any error code. It saves a Clinton technician a trip for parts.

One call to reach a local washing machine repair company
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech