If your Frigidaire washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Clinton list starts with companies that name Frigidaire, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Frigidaire, and the technicians listed are independent repair companies, not the manufacturer.
Independent Frigidaire Washer Technicians, Clinton TN
Within 30 miles of Clinton there are 36 appliance repair companies in our data. 1 list an address in Clinton, and other nearby bases include Knoxville (20), Lenoir City (3), and Maryville (3). Distances run up to about 28 miles. No company within 90 miles of Clinton mentions Frigidaire by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Nearest on the list: G E Appliance Services, around 0.4 miles out. Across 34 rated companies, the average public rating is 4.4 stars.
Companies are shown by relevance and distance from Clinton. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention washer work | 11 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 18 |
| Mention Frigidaire | 0 |
| Three nearest companies, miles away | 0.4, 7.2, 9.6 |
| Appliance repair companies in range (30 mi) | 36 |
| Listing Saturday hours | 17 |
Closest matches for Clinton: ProTech Appliance Repair, Inc. (12.7 miles away, based in Knoxville, 4.9 stars from 270 reviews, lists Saturday hours); Mr. Appliance of Knoxville (12.5 miles away, based in Knoxville, 4.6 stars from 1,973 reviews); S&S Service LLC (17.8 miles away, based in Lenoir City, 4.9 stars from 95 reviews, lists Saturday hours); Sears Appliance Repair (12.9 miles away, based in Knoxville, 4.2 stars from 260 reviews, lists Saturday hours).
Frigidaire Washer Lines and Features
How Frigidaire Washers Are Built
Supply pressure is specified at 30 to 120 psi with no more than about 10 psi difference between hot and cold, and the inlet connectors have filters that can clog. Source: Frigidaire - Laundry Water Supply Guide
Common Frigidaire Washer Problems
- Off balance / shaking. Level the washer, confirm the foam shipping support was removed, and redistribute any clothes bunched on one side. Source: Frigidaire - Top loading washer Error Code E4 washer is out of balance
- Washer won't start. First confirm the washer is sitting level. Source: Frigidaire - What should I do if my washer does not start?
Reading a Frigidaire Washer Error Code
| Code | What it means |
|---|---|
| E4 | The washer is out of balance during spin (top load). Source: Frigidaire - Top loading washer Error Code E4 washer is out of balance |
| E2 | Water is taking too long to drain or not draining properly (top load). Source: Frigidaire - Top loading washer Error Code E2 water takes too long to drain |
Signs Your Frigidaire Washer Needs a Technician
- Burning smell or a motor that hums without turning
- Grinding or roaring noise that rises with spin speed
- Washer will not start or the lid or door stays locked
How a Washer Service Call Usually Goes in Clinton
Owner Care for Frigidaire Washers
- Use the recommended detergent amount and keep dispenser compartments below the max line, since excess detergent slows draining. Source: Frigidaire - What should I do if my washer is draining slowly?
- Level the washer front to back and side to side on a solid floor, then tighten the leveling-leg lock nuts; legs should not extend more than half an inch below the base. Source: Frigidaire - Laundry Washers Noises Guide
What Frigidaire Washer Repairs Cost
Price the repair before replacing a Frigidaire washer. Published ranges for common jobs:
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Frigidaire Washer Call
- Where the washer drains (standpipe or laundry sink)
- How old the washer is
- Any error code shown on the display
Around Clinton
Most washer calls in Clinton come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Tennessee's Board for Licensing Contractors does not list an appliance repair license among the licenses it issues (general contractor, home improvement, limited licensed electrician and limited licensed plumber). Source: TN Board for Licensing Contractors
In Tennessee, you can check a license with the Tennessee Department of Commerce and Insurance: Verify a License or report a problem to the Tennessee Division of Consumer Affairs (Office of the Attorney General).
Hiring a Washer Repair Company in Clinton
- How often do you repair Frigidaire washers, and how quickly can you get parts?
- Do you work on front-load and top-load washers, or only one type?
- What is the service call or diagnostic fee, and is it applied to the repair?
Frigidaire Washer Repair FAQs: Clinton, TN
Why does my front-load washer smell?
Why is my washer leaking?
How do I find a technician who knows Frigidaire washers?
More Washing Machine Repair in Clinton, TN
Frigidaire Washer Repair Near Clinton
Before you call, find the model and serial number on your Frigidaire washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.