Most Whirlpool washer repairs in Oak Ridge involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving Oak Ridge, with those that mention Whirlpool first, then the nearest appliance repair companies.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Whirlpool. If your washer is still under manufacturer coverage, contact Whirlpool directly.
Whirlpool Washer Repair Near Oak Ridge
We found 35 appliance repair companies within 30 miles of Oak Ridge. 1 of them are based in Oak Ridge itself, and other nearby bases include Knoxville (19), Lenoir City (3), and Harriman (3). Distances run up to about 28 miles. None of the companies within 30 miles mention Whirlpool by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. Pinpoint Appliance Repair is the nearest, roughly 3.8 miles from Oak Ridge. Across 33 rated companies, the average public rating is 4.4 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Open on Saturdays (per listing) | 16 |
|---|---|
| Companies within 30 miles | 35 |
| Mention Whirlpool | 0 |
| Distance to the three closest (mi) | 3.8, 5.4, 8.3 |
| With 4.5+ stars and at least 10 reviews | 17 |
| Mention washer work | 11 |
At the top of the Oak Ridge list: Whirlpool Corporation (64.7 miles away, based in Cleveland, 2.7 stars from 12 reviews); S&S Service LLC (8.3 miles away, based in Lenoir City, 4.9 stars from 95 reviews, lists Saturday hours); Mr. Appliance of Knoxville (12.5 miles away, based in Knoxville, 4.6 stars from 1,973 reviews); Eleet Appliance Repair (5.4 miles away, based in Lenoir City, 4.8 stars from 45 reviews, lists Saturday hours).
Whirlpool Washer Lines Technicians Work On
What Makes Whirlpool Washer Repairs Different
Some models sense load size before filling, tumbling or spinning the drum briefly, and then set the water volume to match, so a partly filled tub is often normal. Source: Whirlpool - Why won't my washing machine fill with water
The drain hose must run to a standpipe between 30 and 96 inches tall, since a higher drain can let water flow back into the washer. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
What Whirlpool Says to Check First
- Washer not filling. Make sure both hot and cold supply valves are fully open, the fill hoses are not kinked, and the inlet screens are not clogged with sediment. Source: Whirlpool - Why won't my washing machine fill with water
- Washer shaking or walking. Remove the shipping bolts, adjust the feet until all four sit firmly on the floor, and spread heavy and light items evenly in the drum. Source: Whirlpool - Washer is Vibrating, Walking or Moving
Whirlpool Washer Error Codes
| Code | What it means |
|---|---|
| F8 E2 | Dispenser system problem on select models, often a clogged detergent drawer or cartridge. Source: Whirlpool - Error Codes in Front Load Washers |
| F7 E1 | Motor speed sensing problem; check that shipping bolts are removed and the washer is not overloaded. Source: Whirlpool - Error Codes in Front Load Washers |
| Int | The cycle was paused or canceled, and the washer may drain and spin for a while before it stops. Source: Whirlpool - Error Codes in Front Load Washers |
Whirlpool Washer Problems Worth a Service Call
- Washer will not start or the lid or door stays locked
- Water on the floor under or in front of the washer
- Grinding or roaring noise that rises with spin speed
What Gets Fixed on a Oak Ridge Washer Call
Owner Care for Whirlpool Washers
- Replace the water fill hoses about every five years. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
- Leave the front load door ajar between loads and remove wet clothes promptly so moisture can dry out. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
Whirlpool Washer Repair Cost Ranges
Most Whirlpool washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Where the washer drains (standpipe or laundry sink)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Any error code shown on the display
Around Oak Ridge
Most washer calls in Oak Ridge come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Tennessee's Board for Licensing Contractors does not list an appliance repair license among the licenses it issues (general contractor, home improvement, limited licensed electrician and limited licensed plumber). Source: TN Board for Licensing Contractors
In Tennessee, you can check a license with the Tennessee Department of Commerce and Insurance: Verify a License or report a problem to the Tennessee Division of Consumer Affairs (Office of the Attorney General).
Before You Book in Oak Ridge
- Do you work on front-load and top-load washers, or only one type?
- Can you give a written estimate before ordering parts?
- What guarantee do you give on parts and labor?
Whirlpool Washer Repair FAQs: Oak Ridge, TN
Why does my Whirlpool washer show an error code?
Is this Whirlpool customer service?
How do I get rid of a washer mildew smell?
More Washing Machine Repair in Oak Ridge, TN
Whirlpool Washer Repair Near Oak Ridge
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Whirlpool repair.