A washer that stops mid-cycle with a drum full of water turns a normal laundry day into a mess of wet towels and trips to the laundromat. This page lists independent appliance repair companies serving Park City and the Summit County area, with companies that mention washer work shown first.
Who Repairs Washers Near Park City
Our data shows 40 appliance repair companies inside a 30-mile radius of Park City. 1 list an address in Park City, and the rest are spread across Sandy (12), Salt Lake City (10), and South Salt Lake (4). Distances run up to about 21 miles. Of those, 7 mention washing machine or washer work by name. The closest is Heber Park City Appliance Sales., about 0.4 miles away. Across 28 rated companies, the average public rating is 4.8 stars.
Companies are shown by relevance and distance from Park City. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention a major washer brand | 1 |
|---|---|
| Distance to the three closest (mi) | 0.4, 10.4, 11.3 |
| Open on Saturdays (per listing) | 42 |
| Mention washer work | 10 |
| Rated 4.5 stars or higher (10+ reviews) | 13 |
| Appliance repair companies in range (30 mi) | 60 |
First up for Park City: Appliance Service By Paul (21.0 miles away, based in Salt Lake City, 4.8 stars from 2,590 reviews, lists Saturday hours); PowerClean Appliance Repair (18.7 miles away, based in Midvale, 4.9 stars from 949 reviews, lists Saturday hours); Famous Appliance Service (21.6 miles away, based in Midvale, 4.6 stars from 805 reviews); Trusty Appliance Repair (19.2 miles away, based in Sandy, 4.9 stars from 313 reviews, lists Saturday hours).
When to Call for Washer Repair
- An error code on the display
- Water on the floor under or in front of the washer
- Grinding or roaring noise that rises with spin speed
- Water left in the drum after the cycle
Why Washing Machines Break Down
How a Washer Service Call Usually Goes in Park City
Troubleshooting first? Start with washer not spinning or washer not filling with water.
Water, Power and Safety First
Whirlpool recommends replacing washer fill hoses every five years to lower the risk of a hose failing and leaking. Source: Whirlpool - Washing Machine Fill Hoses
Manufacturers require the washer to be electrically grounded and warn against using an extension cord or modifying the plug. Source: Maytag - High-Efficiency Washer Installation Instructions
Set the washer on a solid floor with no more than about 1 inch of slope under the cabinet, adjust the leveling feet, and tighten the locknuts against the cabinet; loose locknuts can cause vibration. Source: Whirlpool - Washer Installation Instructions
More: where washer leaks come from.
Washing Machine Repair Cost Ranges
Most washing machine repairs come down to one part and an hour or two of labor, which is why many are worth pricing before you shop for a new washer. Published ranges:
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Laundry Notes for Park City, UT
Most washer calls in Park City come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Before You Book in Park City
- What guarantee do you give on parts and labor?
- Is your company licensed where my state requires it, and insured?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
Washing Machine Repair FAQs: Park City, UT
What should I check before calling?
What stops a washer from spinning?
How much does washing machine repair cost in Park City?
Washer Repair by Brand in Park City
Washing Machine Repair Near Park City
Before you call a Park City technician, check that the washer is plugged in, the hot and cold valves behind it are open and the drain hose is not kinked. If it is a front loader, clean the drain pump filter. If the problem stays, have the model number ready.