Serving Sandy, Utah and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Sandy, UT

Water left in the drum, a washer that will not spin or a puddle on the laundry room floor? Here are the companies that serve Sandy.

Washer down in Sandy?
One call connects you with a local technician who repairs front-load and top-load washers.
☎(866) 293-4411
✓12 companies listed for Sandy✓Independent, not a manufacturer✓Public ratings & distances

A washer that stops mid-cycle with a drum full of water turns a normal laundry day into a mess of wet towels and trips to the laundromat. The Sandy list below starts with companies that show washer work in their listings, followed by other appliance repair companies nearby.

Washer Technicians Serving Sandy, UT

40 repair companies serve Sandy from within 30 miles. 14 of them are based in Sandy itself, and other nearby bases include Midvale (6), Draper (5), and West Jordan (5). The farthest listed company is about 6 miles out. 8 list washing machine or washer work specifically. The closest is United Home Appliance Repair | Sandy, about 0.5 miles away. Across 23 rated companies, the average public rating is 4.8 stars.

Washer & Dryer Repair
Appliance Service By Paul
397 W 5900 S, Salt Lake City, UT 84107
5.6 mi from Sandy
★★★★★ 4.8 (2,590 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
PowerClean Appliance Repair
1206 E Waterside Cv APT 13, Midvale, UT 84047
3.3 mi from Sandy
★★★★★ 4.9 (949 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Famous Appliance Service
7787 S Allen St, Midvale, UT 84047
3.6 mi from Sandy
★★★★½ 4.6 (805 reviews)
Mentions washers
Washer & Dryer Repair
Trusty Appliance Repair
8223 S 1000 E, Sandy, UT 84094
2.2 mi from Sandy
★★★★★ 4.9 (313 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Eagle Appliance Repair
8543 S Redwood Rd C, West Jordan, UT 84088
4.9 mi from Sandy
★★★★★ 4.9 (204 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Mr. Appliance of Salt Lake City
3565 S W Temple St Suite 12, Salt Lake City, UT 84115
8.8 mi from Sandy
★★★★½ 4.7 (1,513 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Appliance Man
9069 State St, Sandy, UT 84070
2.4 mi from Sandy
★★★★½ 4.7 (424 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Titan Appliance Repair
3195 S Main St Ste 181, South Salt Lake, UT 84115
9.3 mi from Sandy
★★★★★ 4.8 (21 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Quality Appliance Service
2258 Constitution Blvd, West Valley City, UT 84119
11.9 mi from Sandy
★★★★½ 4.6 (1,441 reviews)
Mentions washers
Washer & Dryer Repair
Sears Appliance Repair
9269 Village Shop Dr, Sandy, UT 84094
1.1 mi from Sandy
★★★★½ 4.3 (134 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Home Services Appliance Repair
1338 Jefferson St, Salt Lake City, UT 84115
12.0 mi from Sandy
★★★★ 3.8 (66 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Liberty Appliance Service
7787 S Allen St, Midvale, UT 84047
4.0 mi from Sandy
★★★★ 3.8 (19 reviews)
Mentions washers

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

By the numbers: technicians near Sandy
Name washers or washing machines in their listing8
Rated 4.5 stars or higher (10+ reviews)11
Mention a major washer brand0
Companies within 30 miles60
Listing Saturday hours40
Three nearest companies, miles away0.5, 0.8, 0.9

First up for Sandy: Appliance Service By Paul (5.6 miles away, based in Salt Lake City, 4.8 stars from 2,590 reviews, lists Saturday hours); PowerClean Appliance Repair (3.3 miles away, based in Midvale, 4.9 stars from 949 reviews, lists Saturday hours); Famous Appliance Service (3.6 miles away, based in Midvale, 4.6 stars from 805 reviews); Trusty Appliance Repair (2.2 miles away, 4.9 stars from 313 reviews, lists Saturday hours).

⚡ One call to reach a local washing machine repair company
☎(866) 293-4411

When to Call for Washer Repair

  • Washer fills slowly, will not fill, or keeps filling
  • Washer will not spin, or clothes come out soaking wet
  • An error code on the display
  • Grinding or roaring noise that rises with spin speed

Why Washing Machines Break Down

Hoses, seals and the door bootFill hoses age and crack, drain hose clamps loosen, and the rubber door boot on a front loader can tear or trap water. Leaks usually start small under the washer before they show on the floor.
Belts, couplers and motorsDepending on the design, the motor turns the drum through a belt, a motor coupling or a direct-drive rotor. A worn belt, broken coupler or failed motor leaves the drum still while the washer hums or fills.
Lid switches and door locksA washer will not fill, agitate or spin unless the lid switch or door lock tells the control the lid or door is shut and locked. A worn switch or failed lock is one of the most common parts replaced.

How a Washer Service Call Usually Goes in Sandy

Water level sensingA pressure switch or sensor tells the control how much water is in the tub. A blocked air tube or failed switch can cause overfilling, underfilling or a washer that will not move on to the next step.
Controls and error codesElectronic washers report faults with codes. The technician reads the code and runs the brand's test mode where there is one, then checks wiring and the control board before ordering it, since boards are among the costlier parts.
Water inlet valve and hosesAn electric valve meters hot and cold water in. A technician checks its inlet screens for sediment and tests its coils when the washer fills slowly, will not fill, or will not stop filling.

Troubleshooting first? Start with washer not spinning or washer smells like mildew.

Leaks and Safe Shutoff

Always install new inlet hoses rather than reusing old ones, check them from time to time, and replace any hose that shows bulges, kinks, cuts, wear or leaks. Source: Whirlpool - Washer Installation Instructions

Manufacturers require the washer to be electrically grounded and warn against using an extension cord or modifying the plug. Source: Maytag - High-Efficiency Washer Installation Instructions

Avoid installing a washer on carpet or loose plywood, and keep leveling legs from extending more than half an inch below the cabinet. Source: Electrolux - Laundry Washers Noises Guide

More: where washer leaks come from.

Repair or Replace Your Washer?

Most washing machine repairs come down to one part and an hour or two of labor, which is why many are worth pricing before you shop for a new washer. Published ranges:

50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Local Notes for Sandy

Most washer calls in Sandy come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308

In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.

Hiring a Washer Repair Company in Sandy

  • What is the service call or diagnostic fee, and is it applied to the repair?
  • Is your company licensed where my state requires it, and insured?
  • If the washer is leaking, will you find where the water starts before quoting a part?

Washing Machine Repair FAQs: Sandy, UT

Why won't my washer drain?
The usual causes are a clogged drain pump filter (on most front loaders), a kinked or blocked drain hose, a sock or small item caught in the pump, or a failed drain pump. Clear the filter and check the hose first. If water still sits in the drum, a technician can test the pump.
Why does my front-load washer smell?
Residue from detergent and fabric softener collects in the door boot, the dispenser and the drum. Wipe the boot, clean the dispenser, run the washer's cleaning cycle or a hot empty cycle, and leave the door open between loads.
Why won't my washer spin?
An unbalanced load, water that will not drain, or a lid switch or door lock that is not engaging stops most spin cycles. If those check out, a technician looks at the drive belt, motor coupling, motor and control.

Brand-Specific Washer Repair, Sandy

More Washing Machine Repair Pages Nearby

Write down the model and serial number from the label (inside the lid or door frame, or on the back of the cabinet) and note any error code. It saves a Sandy technician a trip for parts.

Skip the calling around: we will find a washer tech for you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech