Serving Riverton, Utah and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Riverton, UT

Water left in the drum, a washer that will not spin or a puddle on the laundry room floor? Here are the companies that serve Riverton.

Water sitting in the washer in Riverton?
One call connects you with a local technician who repairs front-load and top-load washers.
☎(866) 293-4411
✓12 companies listed for Riverton✓Independent, not a manufacturer✓Public ratings & distances

Washers fail in fairly predictable ways, which is good news: many repairs are a single part that a technician can replace in one visit. This page lists independent appliance repair companies serving Riverton and the Salt Lake County area, with companies that mention washer work shown first.

Washer Technicians Serving Riverton, UT

Within 30 miles of Riverton there are 40 appliance repair companies in our data. 7 list an address in Riverton, and other nearby bases include West Jordan (10), Sandy (8), and South Jordan (6). Distances run up to about 7 miles. The closest is Apex Appliance Service, about 0.9 miles away. 5 of them mention washing machine or washer work in their listing or website. The 22 rated companies in range average 4.7 stars.

Washer & Dryer Repair
Appliance Service By Paul
397 W 5900 S, Salt Lake City, UT 84107
9.2 mi from Riverton
★★★★★ 4.8 (2,590 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Famous Appliance Service
7787 S Allen St, Midvale, UT 84047
6.4 mi from Riverton
★★★★½ 4.6 (805 reviews)
Mentions washers
Washer & Dryer Repair
PowerClean Appliance Repair
1206 E Waterside Cv APT 13, Midvale, UT 84047
9.0 mi from Riverton
★★★★★ 4.9 (949 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Eagle Appliance Repair
8543 S Redwood Rd C, West Jordan, UT 84088
5.6 mi from Riverton
★★★★★ 4.9 (204 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Trusty Appliance Repair
8223 S 1000 E, Sandy, UT 84094
7.9 mi from Riverton
★★★★★ 4.9 (313 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Appliance Man
9069 State St, Sandy, UT 84070
6.1 mi from Riverton
★★★★½ 4.7 (424 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Mr. Appliance of Salt Lake City
3565 S W Temple St Suite 12, Salt Lake City, UT 84115
12.7 mi from Riverton
★★★★½ 4.7 (1,513 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Titan Appliance Repair
3195 S Main St Ste 181, South Salt Lake, UT 84115
13.3 mi from Riverton
★★★★★ 4.8 (21 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Quality Appliance Service
2258 Constitution Blvd, West Valley City, UT 84119
14.1 mi from Riverton
★★★★½ 4.6 (1,441 reviews)
Mentions washers
Washer & Dryer Repair
Sears Appliance Repair
9269 Village Shop Dr, Sandy, UT 84094
7.0 mi from Riverton
★★★★½ 4.3 (134 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Home Services Appliance Repair
1338 Jefferson St, Salt Lake City, UT 84115
15.8 mi from Riverton
★★★★ 3.8 (66 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Liberty Appliance Service
7787 S Allen St, Midvale, UT 84047
7.0 mi from Riverton
★★★★ 3.8 (19 reviews)
Mentions washers

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

Repair market snapshot: Riverton, UT
Three nearest companies, miles away0.9, 1.1, 1.1
Appliance repair companies in range (30 mi)60
Mention a major washer brand0
Rated 4.5 stars or higher (10+ reviews)11
Open on Saturdays (per listing)39
Name washers or washing machines in their listing8

At the top of the Riverton list: Appliance Service By Paul (9.2 miles away, based in Salt Lake City, 4.8 stars from 2,590 reviews, lists Saturday hours); Famous Appliance Service (6.4 miles away, based in Midvale, 4.6 stars from 805 reviews); PowerClean Appliance Repair (9.0 miles away, based in Midvale, 4.9 stars from 949 reviews, lists Saturday hours); Eagle Appliance Repair (5.6 miles away, based in West Jordan, 4.9 stars from 204 reviews, lists Saturday hours).

⚡ One call to reach a local washing machine repair company
☎(866) 293-4411

Signs Your Washing Machine Needs a Technician

  • Burning smell or a motor that hums without turning
  • Washer will not start or the lid or door stays locked
  • An error code on the display
  • Water on the floor under or in front of the washer

Why Washing Machines Break Down

Water inlet valveAn electric valve behind the washer lets hot and cold water in. When it sticks or its screens clog, the washer fills slowly, not at all, or keeps filling.
Lid switches and door locksA washer will not fill, agitate or spin unless the lid switch or door lock tells the control the lid or door is shut and locked. A worn switch or failed lock is one of the most common parts replaced.
Belts, couplers and motorsDepending on the design, the motor turns the drum through a belt, a motor coupling or a direct-drive rotor. A worn belt, broken coupler or failed motor leaves the drum still while the washer hums or fills.

What Gets Fixed on a Riverton Washer Call

Water level sensingA pressure switch or sensor tells the control how much water is in the tub. A blocked air tube or failed switch can cause overfilling, underfilling or a washer that will not move on to the next step.
Controls and error codesElectronic washers report faults with codes. The technician reads the code and runs the brand's test mode where there is one, then checks wiring and the control board before ordering it, since boards are among the costlier parts.
Drain hose and standpipeThe drain hose runs to a standpipe or laundry sink. A kinked hose, a clog in the standpipe or a hose pushed too far down the pipe can stop draining or siphon water out mid-fill.

Troubleshooting first? Start with washer not draining or washer not spinning.

Before Anyone Touches the Washer

Whirlpool recommends replacing washer fill hoses every five years to lower the risk of a hose failing and leaking. Source: Whirlpool - Washing Machine Fill Hoses

Plug the washer into a grounded three-prong outlet on a 15- or 20-amp 120-volt circuit, and never remove the ground prong or use an adapter or extension cord. Source: Whirlpool - Washer Installation Instructions

More: where washer leaks come from.

What Washer Repair Costs in Riverton

A washer repair is usually a single part plus labor. Reference ranges from published cost guides:

For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Local Notes for Riverton

Most washer calls in Riverton come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308

In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.

Questions to Ask a Riverton Washer Technician

  • Can you give a written estimate before ordering parts?
  • If a part has to be ordered, how soon can you come back to finish?
  • Is your company licensed where my state requires it, and insured?

Washing Machine Repair FAQs: Riverton, UT

What stops a washer from spinning?
An unbalanced load, water that will not drain, or a lid switch or door lock that is not engaging stops most spin cycles. If those check out, a technician looks at the drive belt, motor coupling, motor and control.
Why does my washer shake or walk across the floor?
An unbalanced load is the most common cause, followed by a washer that is not level. If it keeps happening with balanced loads on a level floor, worn shock absorbers, suspension springs or drum bearings are the likely cause, and a technician should check them.
Why does my front-load washer smell?
Residue from detergent and fabric softener collects in the door boot, the dispenser and the drum. Wipe the boot, clean the dispenser, run the washer's cleaning cycle or a hot empty cycle, and leave the door open between loads.

Washer Repair by Brand in Riverton

Washing Machine Repair in Nearby Cities

Write down the model and serial number from the label (inside the lid or door frame, or on the back of the cabinet) and note any error code. It saves a Riverton technician a trip for parts.

Get connected with a washer technician near Riverton
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech