A Frigidaire washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. Below are independent repair companies serving Sandy, with those that mention Frigidaire first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Frigidaire, and the technicians listed are independent repair companies, not the manufacturer.
Independent Frigidaire Washer Technicians, Sandy UT
Within 30 miles of Sandy there are 40 appliance repair companies in our data. 14 of them are based in Sandy itself, and the rest are spread across Midvale (6), Draper (5), and West Jordan (5). Distances run up to about 6 miles. United Home Appliance Repair | Sandy is the nearest, roughly 0.5 miles from Sandy. No company within 90 miles of Sandy mentions Frigidaire by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rated companies nearby average 4.8 stars across 23 businesses.
Companies are shown by relevance and distance from Sandy. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Appliance repair companies in range (30 mi) | 60 |
|---|---|
| Listing Saturday hours | 40 |
| With 4.5+ stars and at least 10 reviews | 11 |
| Name washers or washing machines in their listing | 8 |
| Mention Frigidaire | 0 |
| Distance to the three closest (mi) | 0.5, 0.8, 0.9 |
The leading options for Sandy are PowerClean Appliance Repair (3.3 miles away, based in Midvale, 4.9 stars from 949 reviews, lists Saturday hours); Appliance Service By Paul (5.6 miles away, based in Salt Lake City, 4.8 stars from 2,590 reviews, lists Saturday hours); Trusty Appliance Repair (2.2 miles away, 4.9 stars from 313 reviews, lists Saturday hours); Famous Appliance Service (3.6 miles away, based in Midvale, 4.6 stars from 805 reviews).
Frigidaire sells top-load and laundry center washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Frigidaire Washer Lines Technicians Work On
What a Frigidaire Washer Technician Deals With
Supply pressure is specified at 30 to 120 psi with no more than about 10 psi difference between hot and cold, and the inlet connectors have filters that can clog. Source: Frigidaire - Laundry Water Supply Guide
Frigidaire Washer Symptoms and First Checks
- Washer draining slowly. Clear kinks or clogs in the drain hose, check standpipe height and diameter, and cut back on excess detergent. Source: Frigidaire - What should I do if my washer is draining slowly?
- Washer won't start. First confirm the washer is sitting level. Source: Frigidaire - What should I do if my washer does not start?
Frigidaire Washer Error Codes
| Code | What it means |
|---|---|
| E4 | The washer is out of balance during spin (top load). Source: Frigidaire - Top loading washer Error Code E4 washer is out of balance |
| E2 | Water is taking too long to drain or not draining properly (top load). Source: Frigidaire - Top loading washer Error Code E2 water takes too long to drain |
Signs Your Frigidaire Washer Needs a Technician
- Washer will not start or the lid or door stays locked
- Washer fills slowly, will not fill, or keeps filling
- Burning smell or a motor that hums without turning
How a Washer Service Call Usually Goes in Sandy
Owner Care for Frigidaire Washers
- Level the washer front to back and side to side on a solid floor, then tighten the leveling-leg lock nuts; legs should not extend more than half an inch below the base. Source: Frigidaire - Laundry Washers Noises Guide
- Use the recommended detergent amount and keep dispenser compartments below the max line, since excess detergent slows draining. Source: Frigidaire - What should I do if my washer is draining slowly?
What Frigidaire Washer Repairs Cost
A Frigidaire washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Where the washer drains (standpipe or laundry sink)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- How old the washer is
What Sandy Owners Should Know
Most washer calls in Sandy come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Before You Book in Sandy
- What is the service call or diagnostic fee, and is it applied to the repair?
- How often do you repair Frigidaire washers, and how quickly can you get parts?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
Frigidaire Washer Repair FAQs: Sandy, UT
How do I get rid of a washer mildew smell?
How do I find a technician who knows Frigidaire washers?
Do you work for Frigidaire?
Why is my washer leaking?
Other Washer Repair in Sandy
Frigidaire Washer Repair Near Sandy
Also Serving Towns Around Sandy
Frigidaire washer repair for White City is handled by the same companies listed for Sandy. Each town also has its own washing machine repair page with the nearest companies:
Before you call, find the model and serial number on your Frigidaire washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.