If your Amana washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. We flag companies whose listing or website mentions Amana and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with Amana, and the technicians listed are independent repair companies, not the manufacturer.
Amana Washer Repair Near Park City
We found 40 appliance repair companies within 30 miles of Park City. 1 list an address in Park City, and the rest are spread across Sandy (12), Salt Lake City (10), and South Salt Lake (4). The farthest listed company is about 21 miles out. No company within 90 miles of Park City mentions Amana by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Heber Park City Appliance Sales. is the nearest, roughly 0.4 miles from Park City. The 28 rated companies in range average 4.8 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Name washers or washing machines in their listing | 10 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 13 |
| Mention Amana | 0 |
| Listing Saturday hours | 42 |
| Three nearest companies, miles away | 0.4, 10.4, 11.3 |
| Repair companies inside 30 miles | 60 |
At the top of the Park City list: PowerClean Appliance Repair (18.7 miles away, based in Midvale, 4.9 stars from 949 reviews, lists Saturday hours); Appliance Man (20.8 miles away, based in Sandy, 4.7 stars from 424 reviews, lists Saturday hours); Mr. Appliance of Salt Lake City (20.7 miles away, based in Salt Lake City, 4.7 stars from 1,513 reviews, lists Saturday hours); Trusty Appliance Repair (19.2 miles away, based in Sandy, 4.9 stars from 313 reviews, lists Saturday hours).
Know which Amana washer you have before you call. Amana makes top-load agitator models, and the technician will ask.
Amana Washer Lines Technicians Work On
What a Amana Washer Technician Deals With
A lid or door switch lets the washer run only when the lid is fully closed, so a bad switch can keep the washer from draining or spinning. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
Amana Washer Symptoms and First Checks
- Washer not filling. Amana says to start at the faucets and make sure both hot and cold are on, then check the inlet hoses for kinks and the inlet screens for clogs. Source: Amana - Checking the Fill Hoses if the Washer is not Filling
- Lid won't lock or unlock. Amana says to clear anything caught under the lid and any detergent buildup around the lock, and to take items such as a laundry basket off the top of the washer. Source: Amana - Error Codes in Top Load HE Washers
Amana Washer Error Codes
| Code | What it means |
|---|---|
| drn | Top load: the washer isn't draining properly, sometimes because of how it was installed. Source: Amana - Error Codes in Top Load HE Washers |
| F9 E1 | Front load: draining is taking longer than expected, so check the drain hose and standpipe. Source: Amana - Error Codes in Front Load Washers |
| F5 E2 | Front load: the door isn't locking properly. Source: Amana - Error Codes in Front Load Washers |
Amana Washer Problems Worth a Service Call
- Washer will not start or the lid or door stays locked
- Water left in the drum after the cycle
- Washer will not spin, or clothes come out soaking wet
What Gets Fixed on a Park City Washer Call
Owner Care for Amana Washers
- With the water supply turned off, check the inlet screens on the water valve and brush them clean with mild soapy water, leaving the screens in place. Source: Amana - Checking the Fill Hoses if the Washer is not Filling
- Use only HE detergent, dosed for the load size and soil level, because too much causes oversudsing, longer cycles and poor rinsing. Source: Amana - HE Detergent use in a Washer
Amana Washer Repair Cost Ranges
Most Amana washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Any error code shown on the display
- Where the washer drains (standpipe or laundry sink)
Local Notes for Park City
Most washer calls in Park City come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Questions to Ask a Park City Washer Technician
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- What is the service call or diagnostic fee, and is it applied to the repair?
- If the washer is leaking, will you find where the water starts before quoting a part?
Amana Washer Repair FAQs: Park City, UT
Where is the water under my washer coming from?
Why does my front-load washer smell?
Why won't my washer spin?
Related Repair Pages for Park City
More Amana Washer Repair Pages Nearby
Amana Washer Repair for Towns Near Park City
Amana washer repair for Snyderville and Summit Park is handled by the same companies listed for Park City. Each town also has its own washing machine repair page with the nearest companies:
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Amana repair.