Amana owners in Millcreek usually want two things from a repair company: experience with the brand and quick access to parts. Below are independent repair companies serving Millcreek, with those that mention Amana first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Amana, and the technicians listed are independent repair companies, not the manufacturer.
Amana Washer Repair Near Millcreek
We found 40 appliance repair companies within 30 miles of Millcreek. 1 list an address in Millcreek, and other nearby bases include Salt Lake City (19), South Salt Lake (6), and Midvale (4). The farthest listed company is about 7 miles out. Professional Home Appliance Repair Solutions is the nearest, roughly 1.0 miles from Millcreek. None of the repair companies near Millcreek name Amana in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Rated companies nearby average 4.7 stars across 27 businesses.
Companies are shown by relevance and distance from Millcreek. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Distance to the three closest (mi) | 1.0, 1.6, 1.8 |
|---|---|
| Mention Amana | 0 |
| Rated 4.5 stars or higher (10+ reviews) | 14 |
| Open on Saturdays (per listing) | 43 |
| Name washers or washing machines in their listing | 12 |
| Companies within 30 miles | 60 |
At the top of the Millcreek list: PowerClean Appliance Repair (5.1 miles away, based in Midvale, 4.9 stars from 949 reviews, lists Saturday hours); Mr. Appliance of Salt Lake City (3.4 miles away, based in Salt Lake City, 4.7 stars from 1,513 reviews, lists Saturday hours); Appliance Service By Paul (5.0 miles away, based in Salt Lake City, 4.8 stars from 2,590 reviews, lists Saturday hours); Trusty Appliance Repair (6.3 miles away, based in Sandy, 4.9 stars from 313 reviews, lists Saturday hours).
Amana sells top-load agitator washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Amana Washer Lines and Features
What Makes Amana Washer Repairs Different
A lid or door switch lets the washer run only when the lid is fully closed, so a bad switch can keep the washer from draining or spinning. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
Amana gives a drainpipe height range of 30 inches minimum to 96 inches maximum, and above the maximum, water can flow back into the washer. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
Amana Washer Symptoms and First Checks
- Washer not filling. Amana says to start at the faucets and make sure both hot and cold are on, then check the inlet hoses for kinks and the inlet screens for clogs. Source: Amana - Checking the Fill Hoses if the Washer is not Filling
- Washer not draining or not spinning. Amana's checks include a closed lid, a balanced and not overloaded load, excess suds from too much detergent, a kinked or clogged drain hose, and the drainpipe height. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
Reading a Amana Washer Error Code
| Code | What it means |
|---|---|
| LF / Lo FL / F8 E1 | Washer is filling too slowly or getting low water flow; check that the faucets are fully open and the hoses are clear. Source: Amana - Error Codes in Top Load HE Washers |
| F5 E2 | Front load: the door isn't locking properly. Source: Amana - Error Codes in Front Load Washers |
| LOC / LC | Front load: control lock is on. Source: Amana - Error Codes in Front Load Washers |
Amana Washer Problems Worth a Service Call
- Water on the floor under or in front of the washer
- Washer will not start or the lid or door stays locked
- Water left in the drum after the cycle
How a Washer Service Call Usually Goes in Millcreek
Owner Care for Amana Washers
- Use only HE detergent, dosed for the load size and soil level, because too much causes oversudsing, longer cycles and poor rinsing. Source: Amana - HE Detergent use in a Washer
- Run the Clean Washer cycle with a washer cleaning tablet about once a month to clear detergent and softener residue. Source: Amana - HE Detergent use in a Washer
Budgeting for a Amana Washer Repair
A Amana washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Any error code shown on the display
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Laundry Notes for Millcreek, UT
Most washer calls in Millcreek come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Before You Book in Millcreek
- Can you give a written estimate before ordering parts?
- Is your company licensed where my state requires it, and insured?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
Amana Washer Repair FAQs: Millcreek, UT
Do you work for Amana?
Which Millcreek technicians work on Amana?
How do I get rid of a washer mildew smell?
Other Washer Repair in Millcreek
Amana Washer Repair Near Millcreek
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Amana repair.