If your Frigidaire washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Millcreek list starts with companies that name Frigidaire, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Frigidaire, and the technicians listed are independent repair companies, not the manufacturer.
Independent Frigidaire Washer Technicians, Millcreek UT
40 repair companies serve Millcreek from within 30 miles. 1 of them are based in Millcreek itself, and other nearby bases include Salt Lake City (19), South Salt Lake (6), and Midvale (4). Distances run up to about 7 miles. Professional Home Appliance Repair Solutions is the nearest, roughly 1.0 miles from Millcreek. None of the repair companies near Millcreek name Frigidaire in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Rated companies nearby average 4.7 stars across 27 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention Frigidaire | 0 |
|---|---|
| Open on Saturdays (per listing) | 43 |
| Repair companies inside 30 miles | 60 |
| Distance to the three closest (mi) | 1.0, 1.6, 1.8 |
| Rated 4.5 stars or higher (10+ reviews) | 14 |
| Mention washer work | 12 |
At the top of the Millcreek list: Appliance Service By Paul (5.0 miles away, based in Salt Lake City, 4.8 stars from 2,590 reviews, lists Saturday hours); PowerClean Appliance Repair (5.1 miles away, based in Midvale, 4.9 stars from 949 reviews, lists Saturday hours); Mr. Appliance of Salt Lake City (3.4 miles away, based in Salt Lake City, 4.7 stars from 1,513 reviews, lists Saturday hours); Trusty Appliance Repair (6.3 miles away, based in Sandy, 4.9 stars from 313 reviews, lists Saturday hours).
Frigidaire sells top-load and laundry center washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your Frigidaire Washer
How Frigidaire Washers Are Built
A top-load washer will not spin with the lid open, so an open lid can look like a drain problem. Source: Frigidaire - Top loading washer Error Code E2 water takes too long to drain
Common Frigidaire Washer Problems
- Washer draining slowly. Clear kinks or clogs in the drain hose, check standpipe height and diameter, and cut back on excess detergent. Source: Frigidaire - What should I do if my washer is draining slowly?
- Off balance / shaking. Level the washer, confirm the foam shipping support was removed, and redistribute any clothes bunched on one side. Source: Frigidaire - Top loading washer Error Code E4 washer is out of balance
Reading a Frigidaire Washer Error Code
| Code | What it means |
|---|---|
| E4 | The washer is out of balance during spin (top load). Source: Frigidaire - Top loading washer Error Code E4 washer is out of balance |
| E2 | Water is taking too long to drain or not draining properly (top load). Source: Frigidaire - Top loading washer Error Code E2 water takes too long to drain |
Signs Your Frigidaire Washer Needs a Technician
- Loud banging, shaking or walking during the spin
- Washer will not spin, or clothes come out soaking wet
- Washer will not start or the lid or door stays locked
What Gets Fixed on a Millcreek Washer Call
Care Frigidaire Recommends for Its Washers
- Use the recommended detergent amount and keep dispenser compartments below the max line, since excess detergent slows draining. Source: Frigidaire - What should I do if my washer is draining slowly?
- Empty pockets of coins and buckles and secure the drain hose with zip ties to stop rattling and knocking. Source: Frigidaire - Laundry Washers Noises Guide
What Frigidaire Washer Repairs Cost
A Frigidaire washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Where the washer drains (standpipe or laundry sink)
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- How old the washer is
What Millcreek Owners Should Know
Most washer calls in Millcreek come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
How to Choose a Washing Machine Technician Near Millcreek
- How often do you repair Frigidaire washers, and how quickly can you get parts?
- If a part has to be ordered, how soon can you come back to finish?
- Will you check the drain pump filter and drain hose before replacing the pump?
Frigidaire Washer Repair FAQs: Millcreek, UT
What should I do about a Frigidaire error code?
What stops a washer from spinning?
Why does my front-load washer smell?
More Washing Machine Repair in Millcreek, UT
Frigidaire Washer Repair in Nearby Cities
Before you call, find the model and serial number on your Frigidaire washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.