Most Frigidaire washer repairs in Park City involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Park City list starts with companies that name Frigidaire, followed by other appliance repair companies that work on washers.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Frigidaire. If your washer is still under manufacturer coverage, contact Frigidaire directly.
Independent Frigidaire Washer Technicians, Park City UT
Our data shows 40 appliance repair companies inside a 30-mile radius of Park City. 1 of them are based in Park City itself, and other nearby bases include Sandy (12), Salt Lake City (10), and South Salt Lake (4). The farthest listed company is about 21 miles out. Heber Park City Appliance Sales. is the nearest, roughly 0.4 miles from Park City. None of the repair companies near Park City name Frigidaire in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Rated companies nearby average 4.8 stars across 28 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Open on Saturdays (per listing) | 42 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 13 |
| Mention Frigidaire | 0 |
| Companies within 30 miles | 60 |
| Distance to the three closest (mi) | 0.4, 10.4, 11.3 |
| Mention washer work | 10 |
Closest matches for Park City: PowerClean Appliance Repair (18.7 miles away, based in Midvale, 4.9 stars from 949 reviews, lists Saturday hours); Appliance Service By Paul (21.0 miles away, based in Salt Lake City, 4.8 stars from 2,590 reviews, lists Saturday hours); Trusty Appliance Repair (19.2 miles away, based in Sandy, 4.9 stars from 313 reviews, lists Saturday hours); Mr. Appliance of Salt Lake City (20.7 miles away, based in Salt Lake City, 4.7 stars from 1,513 reviews, lists Saturday hours).
Frigidaire sells top-load and laundry center washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your Frigidaire Washer
How Frigidaire Washers Are Built
Top-load models lock the lid during spin as a safety feature, and the lock takes roughly one to three minutes to release after the washer is stopped. Source: Frigidaire - Top Load washer lid will not open
Frigidaire Washer Symptoms and First Checks
- Lid won't unlock. Stop the washer and give the lid lock one to three minutes to release, since the lid stays locked during spin. Source: Frigidaire - Top Load washer lid will not open
- Washer draining slowly. Clear kinks or clogs in the drain hose, check standpipe height and diameter, and cut back on excess detergent. Source: Frigidaire - What should I do if my washer is draining slowly?
What Frigidaire Washer Codes Mean
| Code | What it means |
|---|---|
| E4 | The washer is out of balance during spin (top load). Source: Frigidaire - Top loading washer Error Code E4 washer is out of balance |
| E2 | Water is taking too long to drain or not draining properly (top load). Source: Frigidaire - Top loading washer Error Code E2 water takes too long to drain |
Frigidaire Washer Problems Worth a Service Call
- Burning smell or a motor that hums without turning
- Washer will not spin, or clothes come out soaking wet
- Washer fills slowly, will not fill, or keeps filling
What a Washing Machine Technician Checks
Owner Care for Frigidaire Washers
- Use new fill hoses with rubber washers, replace flood-safe hoses with standard washer hoses, and run both faucets before connecting to flush debris away from the valve screens. Source: Frigidaire - Laundry Water Supply Guide
- Empty pockets of coins and buckles and secure the drain hose with zip ties to stop rattling and knocking. Source: Frigidaire - Laundry Washers Noises Guide
What Frigidaire Washer Repairs Cost
Most Frigidaire washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Frigidaire Washer Call
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- How old the washer is
- Any error code shown on the display
Local Notes for Park City
Most washer calls in Park City come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Before You Book in Park City
- How often do you repair Frigidaire washers, and how quickly can you get parts?
- If the washer is leaking, will you find where the water starts before quoting a part?
- Is your company licensed where my state requires it, and insured?
Frigidaire Washer Repair FAQs: Park City, UT
What should I do about a Frigidaire error code?
How do I find a technician who knows Frigidaire washers?
Is this Frigidaire customer service?
Should I repair or replace my Frigidaire washer?
Related Repair Pages for Park City
Frigidaire Washer Repair in Nearby Cities
Frigidaire Washer Repair for Towns Near Park City
Frigidaire washer repair for Snyderville and Summit Park is handled by the same companies listed for Park City. Each town also has its own washing machine repair page with the nearest companies:
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Frigidaire repair.