Serving Hooper, Utah and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Hooper, UT

Washing machine repair from independent technicians serving Hooper, with ratings, distances and what to check before you call.

Talk to a washing machine tech near Hooper
One call connects you with a local technician who repairs front-load and top-load washers.
☎(866) 293-4411
✓12 companies listed for Hooper✓Independent, not a manufacturer✓Public ratings & distances

When a washer quits in Hooper, the first question is whether it is a clog or a setting you can clear yourself or a failed part, and that decides whether you need a technician at all. The Hooper list below starts with companies that show washer work in their listings, followed by other appliance repair companies nearby.

Washer Technicians Serving Hooper, UT

25 repair companies serve Hooper from within 30 miles. Other nearby bases include Clearfield (3), Ogden (3), and Clinton (2). The farthest listed company is about 30 miles out. The closest is After Hours Microwave Repair./, about 11.3 miles away. Across 17 rated companies, the average public rating is 4.4 stars.

Appliance Repair
iFiX, LLC
5187 1500 W #1, Riverdale, UT 84405
14.1 mi from Hooper
★★★★★ 4.9 (436 reviews)
Appliance Repair
Dick Kearsley Service Center
520 State St, Clearfield, UT 84015
14.4 mi from Hooper
★★★★½ 4.6 (609 reviews)
Saturday hours
Appliance Repair
Eagle Appliance Repair Of Salt Lake City
724 W 500 S #200, West Bountiful, UT 84087
27.7 mi from Hooper
★★★★★ 5.0 (98 reviews)
Saturday hours
Appliance Repair
Charlie Fuller's Appliance
530 W 1500 S Ste i, Woods Cross, UT 84087
28.5 mi from Hooper
★★★★★ 4.8 (247 reviews)
Saturday hours
Appliance Repair
Ben Lomond Appliance Repair llc
190 E 3250 N, North Ogden, UT 84414
19.7 mi from Hooper
★★★★★ 5.0 (155 reviews)
Saturday hours
Appliance Repair
Famous Appliance Service
501 900 N, North Salt Lake, UT 84054
28.2 mi from Hooper
★★★★½ 4.7 (510 reviews)
Commercial
Appliance Repair
Appliance Clinic Inc
37 W 250 N, Clearfield, UT 84015
13.9 mi from Hooper
★★★★½ 4.5 (43 reviews)
Appliance Repair
Precision Appliance Installs
314 N 650 E, Kaysville, UT 84037
20.6 mi from Hooper
★★★★★ 5.0 (38 reviews)
Appliance Repair
Eagle Appliance Repair
113 W 250 N, Clearfield, UT 84015
13.8 mi from Hooper
★★★★ 4.2 (69 reviews)
Appliance Repair
Ebenezer Appliance Repair
2850 Kiesel Ave, Ogden, UT 84401
16.8 mi from Hooper
★★★★½ 4.7 (25 reviews)
Appliance Repair
Centerville Aveltrix Appliance Repair
475 N Marketplace Dr, Centerville, UT 84014
26.4 mi from Hooper
★★★★★ 5.0 (1 review)
Saturday hours
Appliance Repair
After Hours Microwave Repair./
1611 2400 W, Clinton, UT 84015
11.3 mi from Hooper
★★★★½ 4.3 (3 reviews)
Saturday hours

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

By the numbers: technicians near Hooper
Repair companies inside 30 miles25
With 4.5+ stars and at least 10 reviews10
Mention washer work0
Mention a major washer brand0
Open on Saturdays (per listing)16
Three nearest companies, miles away11.3, 11.7, 12.5

The leading options for Hooper are iFiX, LLC (14.1 miles away, based in Riverdale, 4.9 stars from 436 reviews); Dick Kearsley Service Center (14.4 miles away, based in Clearfield, 4.6 stars from 609 reviews, lists Saturday hours); Eagle Appliance Repair Of Salt Lake City (27.7 miles away, based in West Bountiful, 5.0 stars from 98 reviews, lists Saturday hours); Charlie Fuller's Appliance (28.5 miles away, based in Woods Cross, 4.8 stars from 247 reviews, lists Saturday hours).

⚡ Tell us what your washer is doing and we will connect you
☎(866) 293-4411

When to Call for Washer Repair

  • Burning smell or a motor that hums without turning
  • Grinding or roaring noise that rises with spin speed
  • Loud banging, shaking or walking during the spin
  • Water on the floor under or in front of the washer

What Usually Goes Wrong

Belts, couplers and motorsDepending on the design, the motor turns the drum through a belt, a motor coupling or a direct-drive rotor. A worn belt, broken coupler or failed motor leaves the drum still while the washer hums or fills.
Hoses, seals and the door bootFill hoses age and crack, drain hose clamps loosen, and the rubber door boot on a front loader can tear or trap water. Leaks usually start small under the washer before they show on the floor.
Lid switches and door locksA washer will not fill, agitate or spin unless the lid switch or door lock tells the control the lid or door is shut and locked. A worn switch or failed lock is one of the most common parts replaced.

What a Washing Machine Technician Checks

Tub bearings and sealA rumble or roar that gets louder as the drum speeds up usually means worn bearings, often after a tub seal has let water reach them. It is one of the bigger repairs, so the technician will compare it with the washer's age and value.
Controls and error codesElectronic washers report faults with codes. The technician reads the code and runs the brand's test mode where there is one, then checks wiring and the control board before ordering it, since boards are among the costlier parts.
Drive belt, coupler and motorBelt-drive washers turn the drum with a belt; others use a motor coupling or a direct-drive motor bolted to the tub. A hum with no movement, a burning smell or a drum that turns by hand too easily points here.

Troubleshooting first? Start with front-load vs top-load washer problems or washer not draining.

Leaks and Safe Shutoff

Whirlpool recommends replacing washer fill hoses every five years to lower the risk of a hose failing and leaking. Source: Whirlpool - Washing Machine Fill Hoses

Unplug the washer before servicing or cleaning it; pressing the power button does not disconnect it from the electrical supply. Source: GE Appliances - Washer Owner's Manual

More: where washer leaks come from.

Washing Machine Repair Cost Ranges

A washer repair is usually a single part plus labor. Reference ranges from published cost guides:

Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Local Notes for Hooper

Most washer calls in Hooper come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308

In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.

Questions to Ask a Hooper Washer Technician

  • Do you work on front-load and top-load washers, or only one type?
  • If the washer is leaking, will you find where the water starts before quoting a part?
  • Can you give a written estimate before ordering parts?

Washing Machine Repair FAQs: Hooper, UT

What does a washer repair usually cost?
Most companies charge a service call or diagnostic fee that is often applied to the repair if you go ahead. Common jobs such as a lid switch, inlet valve, drain pump or drive belt are usually worth fixing on a washer that is otherwise sound. Our washing machine repair cost guide lists published ranges.
Where is the water under my washer coming from?
Common sources are a loose or cracked fill hose, the drain hose connection, a torn door boot on a front loader, too much detergent causing suds overflow, or a leaking pump or tub seal. Unplug the washer and shut both valves, then look where the water starts.
Is there anything I can try first?
Make sure the washer is plugged in and the outlet works, the lid or door closes fully, and both water valves are open. If the washer is leaking, unplug it and turn off both supply valves before doing anything else.

Find Your Washer Brand in Hooper

Washing Machine Repair Near Hooper

Write down the model and serial number from the label (inside the lid or door frame, or on the back of the cabinet) and note any error code. It saves a Hooper technician a trip for parts.

Skip the calling around: we will find a washer tech for you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech