If your Whirlpool washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. Below are independent repair companies serving Hooper, with those that mention Whirlpool first, then the nearest appliance repair companies.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Whirlpool. If your washer is still under manufacturer coverage, contact Whirlpool directly.
Who Works on Whirlpool Washers Near Hooper
Our data shows 25 appliance repair companies inside a 30-mile radius of Hooper. The rest are spread across Clearfield (3), Ogden (3), and Clinton (2). The farthest listed company is about 30 miles out. Nearest on the list: After Hours Microwave Repair./, around 11.3 miles out. No company within 90 miles of Hooper mentions Whirlpool by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 17 rated companies in range average 4.4 stars.
Companies are shown by relevance and distance from Hooper. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Name washers or washing machines in their listing | 0 |
|---|---|
| Listing Saturday hours | 16 |
| Rated 4.5 stars or higher (10+ reviews) | 10 |
| Mention Whirlpool | 0 |
| Three nearest companies, miles away | 11.3, 11.7, 12.5 |
| Repair companies inside 30 miles | 25 |
Closest matches for Hooper: iFiX, LLC (14.1 miles away, based in Riverdale, 4.9 stars from 436 reviews); Ben Lomond Appliance Repair llc (19.7 miles away, based in North Ogden, 5.0 stars from 155 reviews, lists Saturday hours); Dick Kearsley Service Center (14.4 miles away, based in Clearfield, 4.6 stars from 609 reviews, lists Saturday hours); Famous Appliance Service (28.2 miles away, based in North Salt Lake, 4.7 stars from 510 reviews).
Whirlpool Washer Lines Technicians Work On
What Makes Whirlpool Washer Repairs Different
Some models sense load size before filling, tumbling or spinning the drum briefly, and then set the water volume to match, so a partly filled tub is often normal. Source: Whirlpool - Why won't my washing machine fill with water
Common Whirlpool Washer Problems
- Washer not spinning. Redistribute an unbalanced or overloaded load, cut back on detergent to avoid excess suds, and remember delicate cycles spin slowly. Source: Whirlpool - Front Load Washer is not Draining, not Spinning, or Leaving Wet Loads
- Washer won't start. Check that the washer is plugged in and the breaker has not tripped, turn off the control lock if it is on, and reset the washer by cutting power for at least a minute. Source: Whirlpool - How to reset a washing machine
Whirlpool Washer Error Codes
| Code | What it means |
|---|---|
| F8 E2 | Dispenser system problem on select models, often a clogged detergent drawer or cartridge. Source: Whirlpool - Error Codes in Front Load Washers |
| F7 E1 | Motor speed sensing problem; check that shipping bolts are removed and the washer is not overloaded. Source: Whirlpool - Error Codes in Front Load Washers |
| Int | The cycle was paused or canceled, and the washer may drain and spin for a while before it stops. Source: Whirlpool - Error Codes in Front Load Washers |
Whirlpool Washer Problems Worth a Service Call
- Burning smell or a motor that hums without turning
- Washer will not start or the lid or door stays locked
- Water left in the drum after the cycle
Inside a Washer Repair Visit
Owner Care for Whirlpool Washers
- Check and brush clean the small mesh screens where the fill hoses connect at the back of the washer if filling slows. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
- Run the Clean Washer cycle once a month with affresh cleaner or regular liquid chlorine bleach to keep the washer fresh. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
Budgeting for a Whirlpool Washer Repair
Most Whirlpool washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Any error code shown on the display
- How old the washer is
Laundry Notes for Hooper, UT
Most washer calls in Hooper come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Questions to Ask a Hooper Washer Technician
- What guarantee do you give on parts and labor?
- Can you give a written estimate before ordering parts?
- Do you work on front-load and top-load washers, or only one type?
Whirlpool Washer Repair FAQs: Hooper, UT
How do I get rid of a washer mildew smell?
What should I do about a Whirlpool error code?
Do you work for Whirlpool?
Where is the water under my washer coming from?
Related Repair Pages for Hooper
More Whirlpool Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Whirlpool repair.